Compare Prices

16 Channel Analog Multiplexer

16 Channel Analog Multiplexer - HiLetgo CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino
HiLetgo CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for

16 Channel Analog Multiplexer

CD74HC4067 CMOS 16 Channel Digital Analog Multiplexer Breakout Module Arduino Description: This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip's address select pins (S0-S3), and send it the binary address of the channel you want (see the datasheet for details). This allows you to connect up to 16 sensors to your system using only 5 pins! Since the mux/demux also works with digital signals, you can use it to pipe TTL-level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications, you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C, SPI, etc. The internal switches are bidirectional, support voltages ...

  • Function: Use 16 ADCs to collect 16 analog signals.
  • Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.
  • Analog output: DIG;Channel control: S0-S3
  • This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
  • This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction.
  • Color: Blue
  • Brand: HiLetgo
  • ASIN: B01DLHKLNE
  • Part No: 3-01-1068-A
16 Channel Analog Multiplexer - Ximimark 5Pcs 16CH Analog Digital Multiplexer Breakout Board Module CD74HC4067 CMOS Precise Module For Arduino
Ximimark 5Pcs 16CH Analog Digital Multiplexer Breakout Board Module CD74HC4067 CMOS Precise Module For

16 Channel Analog Multiplexer

Specifications: 2V to 6V operation "On" resistance: 70 Ohms @ 4.5V 6ns break-before-make @ 4.5V Wide operating temperature range: -55C to 125C Analog signal input: C0-C15/16 channel Analog output: DIG Channel control: S0-S3 Note: Since our company does not provide technical support, the installation of electronic modules requires basic knowledge and requires a certain electronic professional foundation and hands-on ability. Please purchase carefully! Manual measurement, with small error. Please check size in detail before purchase. Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness. We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution. Package Includes: 5Pcs

  • This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx).
  • It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction.
  • To control it, connect 4 digital outputs to the chip's address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!
  • The internal switches are bidirectional, support voltages between ground and VCC, have low "on" resistance and low "off" leakage, and to prevent crosstalk, perform "break-before-make" switching. The board also breaks out the chip's "enable" pin, which when driven high, will completely disconnect the common pin (all switches "off").
  • Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc.
  • Brand: Ximimark
  • ASIN: B07K7JF3HX
  • UPC: 657835628741
  • Part No: LY170
16 Channel Analog Multiplexer - Analog/Digital MUX Breakout for Arduino
Analog/Digital MUX Breakout for

16 Channel Analog Multiplexer

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip can be used to connect 16 analog sources (like sensors) to 5 pins on a microcontroller. 4 of the pins must be digital pins, 1 pin must be an analog to digital conversion pin. This allows 16 sensors to operate on only 5 pins of a micro! This is a great way to connect a lot of sensors to a few pins. You can also run the mux/demux the other direction. One serial stream connected to the SIG pin can be piped to multiple outputs. The mux/demux also works with digital signals (like serial, I2C, SPI). This means you can hook up multiple serial devices (like a GPS TX pin, and a XBee DOUT pin) to one RX pin on a microcontroller. The IC can control analog voltages that vary across the voltage supply range. The bidirectional switches allow any analog or digital input to be used as an output and vice-versa with a "Break-Before-Make" switching of 6ns at 4.5V. In addition, the switches have low "on" resistances and low "off" leakages. Includes and enable control which when high will disable all switches to their "off" state.

  • 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067
  • ON Resistance 70Ohms @ 4.5Vcc and 60Ohms @ 6VCC
  • 2V to 6V operation
  • Brand: SparkFun
  • ASIN: B0068QD86S
  • UPC: 609456348041
  • Part No: BOB-09056
16 Channel Analog Multiplexer - 10 Pcs CD4051 DIP-16 Single 8 Channels Analog Multiplexer IC
10 Pcs CD4051 DIP-16 Single 8 Channels Analog Multiplexer

16 Channel Analog Multiplexer

The CD4051B is a single 8-Channel multiplexer having three binary control inputs, A, B, and C, and an inhibit input. The three binary signals select 1 of 8 channels to be turned on, and connect one of the 8 inputs to the output.

  • CD4051 is 8-Channel analog multiplexer is digitally-controlled analog switches having low ON impedance and very low OFF leakage current
  • Package / Case: PDIP-16 , RoHS: Yes
  • Logic Types: MSI Functions-Decoders,Encoders and Multiplexers
  • package 10 pcs
  • Quality ensured , no-hassle refund if you are not 100% satisfied!
  • Brand: Jekewin
  • ASIN: B071GKXHBS
  • Part No: CD4051
16 Channel Analog Multiplexer - NOYITO CD74HC4067 CMOS 16-Channel Digital Analog Multiplexer Breakout Module for Arduino
NOYITO CD74HC4067 CMOS 16-Channel Digital Analog Multiplexer Breakout Module for

16 Channel Analog Multiplexer

Description: This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip's address select pins (S0-S3), and send it the binary address of the channel you want . This allows you to connect up to 16 sensors to your system using only 5 pins! Since the mux/demux also works with digital signals, you can use it to pipe TTL-level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications, you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C, SPI, etc. The internal switches are bidirectional, support voltages between ground and VCC, have low "on" resistance and low "off" leakage, and to prevent crosstalk, perform...

  • Function: Use 16 ADCs to collect 16 analog signals.
  • Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.
  • Analog output: DIG;Channel control: S0-S3
  • This is a breakout board for the very handy 16-Channel Analog / Digital Multiplexer / Demultiplexer CD74HC4067.
  • This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction.
  • Brand: NOYITO
  • ASIN: B07C3L3YGL
  • UPC: 667797749347
  • Part No: 43237-2
16 Channel Analog Multiplexer - 16-Channel BNC Video Multiplexer Picture-In-Picture Video Processor
16-Channel BNC Video Multiplexer Picture-In-Picture Video

16 Channel Analog Multiplexer

Professional 16-Channel Video Multiplexer Picture-In-Picture Video Processor This multi-channel video mixer provides a cost effective solution of combining multiple video inputs together into one split screen view for display or recording.The PIP or split-screen window screen format and position can be controlled by using the supplied IR remote, front panel push buttons or RS232/RS485 connection with a PC for distant PTZ control. 16 screen mode options presented in 16/9/8/4/3-grid, quad screen, PIP, picture-by-picture style or single channel full screen. Featured with total of 16 video inputs + 16 video loop-through + 4 audio inputs with 2 composite BNC/RCA video outputs, 1 VGA simultaneous output at 1024x768 pixels max and 1 audio output. All NTSC and PAL video devices or TV monitors are supported. Alarm support for video loss detection, motion detection, external alarm with buzzer sound. Unit is also 1U rack-mount ready. Real-Time Multi-Channel Screen Modes This split screen video processor can overlay all the selected input channels into different formation for viewing or presentation. All video input channels can be presented in the following 16 matrix screen modes: 16-channel split screen 9-channel split screen 8-chnanel split screen 4-channel split screen 3-channel PIP scr...

  • Advanced 16-channel video multiplexer mixer for real-time multi-channel display on one screen. Full duplex operation for displaying and recording all of its video channels simultaneously. Ideal for security monitoring or video preview application where multiple images are needed. Split-screen modes and PIP locations can be manually configured with ease by the front panel, IR remote or RS232 console. 16 individual input buttons for fast switching between each video input.
  • 16 video pass-through ports. 3 video outputs including 2 composite BNC/RCA video outputs and 1 VGA out at 1024x768 for live viewing and recording. 4 audio inputs with 1 audio output. 16 screen mode options presented in 16/9/8/4/3-grid, quad screen, PIP, picture-by-picture style or single channel full screen. Easy selection for main channel, sub/PIP channel via front push buttons or IR remote for best suited visual presentation.
  • Supports RS232 long range control and camera control by RS485 connection. Supports time/date stamp and auto sequential switching function with adjustable dwelling time. Supports programmable motion detection area and sensitivity levels for each camera/input. Flexible external alarm input/output configurations. Supports automatic video loss detection, motion detection, external alarm detection with buzzer sound.
  • Built-in alarm buzzer can be manually enabled for motion detection, video signal loss or external alarm setup. Supports image freeze function, enabling video frames to be paused or captured for extended period of time. High performance zoom function with selectable zoom area for detailed display. Border line On/Off function for use in split screen modes.
  • Individual color adjustment provided for each video input channel for brightness, contrast, hue, saturation and sharpness control. Easy on-screen OSD setup menu for configuration and operation. 1U rack-mount ready. Easy integration with other A/V system and video broadcast applications.
  • Brand: AllAboutAdapters
  • ASIN: B073L1M3SC
  • Part No: MPV-16X
16 Channel Analog Multiplexer - DEVMO 2PCS CD74HC4067 16 Channel Analog Digital Multiplexer MUX Breakout Board Module US
DEVMO 2PCS CD74HC4067 16 Channel Analog Digital Multiplexer MUX Breakout Board Module

16 Channel Analog Multiplexer

- This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board)to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC) and the connections function in either direction. To control it, connect 4 digital outputs to the chip's address select pins (S0-S3) and send it the binary address of the channel you want (see the datasheet for details). This allows you to connect up to 16 sensors to your system using only 5 pins.

  • ★This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
  • ★2V to 6V operation
  • ★6ns break-before-make @ 4.5V,"On" resistance: 70 Ohms @ 4.5V
  • ★Wide operating temperature range: -55C to 125C
  • ★Package Includes: 1PCS 16 Ch. Mulitplexer,2PCS Header Pins as shown above
  • Brand: DEVMO
  • ASIN: B07R55JMDR
  • UPC: 741722788776
16 Channel Analog Multiplexer - Major Brands CD4051 ICS and Semiconductors, Single 8 Channel Analog Multiplexer (Pack of 15)
Major Brands CD4051 ICS and Semiconductors, Single 8 Channel Analog Multiplexer (Pack of

16 Channel Analog Multiplexer

This is a CMOS 8-bit successive approximation A/D converter that uses a differential potentiometric ladder-similar to the 256R products. This converter is designed to allow operation with the NSC800 and INS8080A derivative control bus with TRI-STATE output latches directly driving the data bus. This A/D appears like memorylocations or I/O ports to the microprocessor and no interfacing logic is needed.

  • On-state resistance-max (Ron) (ohm) 400, analog input voltage-Max (V) 15 and switch-on time-max (ns) 450
  • On-state resistance match-nom (ohm) 10, switch-off time-max (ns) 200 and off-state isolation-nom (dB) 40
  • Supply voltage-nom (Vsup) (V) 10, supply voltage-max (Vsup) (V) 15 and supply voltage-min (Vsup) (V) 5
  • Brand: Xytronic
  • ASIN: B00B886RDW
  • Part No: CD4051
16 Channel Analog Multiplexer - (20PCS) CD74HC4067M96 IC MUX/DEMUX 1X16 24SOIC HC4067 74HC4067
(20PCS) CD74HC4067M96 IC MUX/DEMUX 1X16 24SOIC HC4067

16 Channel Analog Multiplexer

Part NO.:CD74HC4067M96Package:24-SOICDescription:IC MUX/DEMUX 1X16 24SOICSupplier:SICSTOCKFunction:Multiplexer/DemultiplexerCircuit:1 x 1:16On-State Resistance:160 OhmVoltage Supply Source:Single SupplyVoltage - Supply, Single/Dual (±):2 V ~ 6 VCurrent - Supply:8µAOperating Temperature:-55°C ~ 125°CMounting Type:Surface MountSupplier Device Package:24-SOIC

  • Part NO.:CD74HC4067M96
  • Package:24-SOIC
  • Description:IC MUX/DEMUX 1X16 24SOIC
  • Brand: SICSTOCK
  • ASIN: B016G5ED82
  • UPC: 350823298833
  • Part No: CD74HC4067M96
16 Channel Analog Multiplexer - KINWAT 10pcs/lot CD74HC4067 16-Channel Digital Multiplexer Breakout Board Module
KINWAT 10pcs/lot CD74HC4067 16-Channel Digital Multiplexer Breakout Board

16 Channel Analog Multiplexer

10pcs/lot CD74HC4067 16-Channel Digital Multiplexer Breakout Board Module For

    • Brand: KINWAT
    • ASIN: B07DW1YFGX
    • Part No: RF5-REF-SSZ1468

    16 Channel Analog Multiplexer X759 Search Results

    Looking for more 16 Channel Analog Multiplexer similar ideas? Try to explore these searches: Kumite Patch, Doskocil Litter Box, and Leopard Print Dog Bowl.

    16 Channel Analog Multiplexer - Popular Video Reviews

    Control 16 channel relay with CD74HC4067 Multiplexer and Arduino with 6 wires

    16 Channel Analog Multiplexer

    Jump to different section of this video: 00:27 Introduction 02:08 Hardware Explained 04:54 Wiring explained 09:05 Code explained 16:58 Demonstration Get code for this video: http://bit.ly/2BLvO65 You can support me on Patreon : http://bit.ly/2ZnITLz Watch how to control 16 Channel Relay with A...

    • Likes: 108
    • View count: 5285
    • Dislikes: 4
    • Comments: 20
    Tags: electronic,drone,tutorial,training,video,robojax,arduino,code,download,cd74hc4067,relay,16 channe...

    16-Channel Analog/Digital Multiplexer from AliExpress + Test

    16 Channel Analog Multiplexer

    Opening package from Aliexpress (16-Channel Analog/Digital Multiplexer) on base CD74HC4067 (Texas Instruments) http://got.by/2mj5i - Link on Aliexpress Description CD74HC4067: This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip ...

    • Likes: 11
    • View count: 5961
    • Dislikes: 20
    • Comments: 8
    Tags: 16-Channel Analog/Digital Multiplexer,16-Channel Analog Multiplexer,16-Channel Multiplexer,multip...

    Sensor tutorial 7: Multiplexer (7 of 7)

    16 Channel Analog Multiplexer

    FULL INSTRUCTABLE: https://www.instructables.com/id/Selecting-the-Right-Sensor-for-Arduino-Projects/ In the final tutorial, I go over how multiplexers work and how to use a multiplexer with an Arduino. These devices can be useful for reading in lots of sensors, especially analog devices because ...

    • Likes: 26
    • View count: 1969
    • Dislikes: 0
    • Comments: 1
    Tags: Arduino,electronics,tutorial,sensors,multiplexer,jrbums,Jon Bumstead,One Bit Kit


    365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.