Compare Prices

Aircharger Intake System

Aircharger Intake System - K&N Cold Air Intake System 2014-2017 Chevrolet Silverado 1500, GMC Sierra 1500 5.3L V8 & 6.2L V8
K&N Cold Air Intake System 2014-2017 Chevrolet Silverado 1500, GMC Sierra 1500 5.3L V8 & 6.2L

Aircharger Intake System

The K&N 63-3082 Cold Air Intake fits Chevrolet Silverado 1500, GMC Sierra 1500 2014-2017 with the V8 5.3L or 6.2L The K&N AirCharger 63-3082 air intake system replaces your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-3082 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that replaces the factory air box. This allows cooler, denser air to be directed through a custom molded intake tube into the engine's throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install requiring only a screwdriver, socket set and several wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Guaranteed horsepower gain (Tested at up to 15.39hp gain)
  • Designed to improve throttle response and engine sound
  • Free-flowing high density polyethylene tube
  • K&N Million Mile Limited Warranty
  • Not Carb Legat for Sale in California
  • Brand: K & N Air Intakes
  • ASIN: B07484MW1H
  • UPC: 786830316800
  • Part No: KN63-3082
Aircharger Intake System - K&N 63-2599 Performance Air Intake System
K&N 63-2599 Performance Air Intake

Aircharger Intake System

The K&N 63-2599 AirCharger air intake system replaces the restrictive factory air filter and air intake housing on select Ford F150 models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body and turbo inlet for a guaranteed power gain. The tube accommodates the factory air temperature sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle's existing factory mounting points. The tools needed are a screwdriver and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Guaranteed to Increase Horsepower
  • Designed to improve throttle response and engine sound
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces entire factory air intake system
  • Free-flowing high density polyethylene tube
  • Washable and reusable lifetime air filter
  • Brand: K&N
  • ASIN: B078HLS3K2
  • UPC: 024844367419
  • Part No: 63-2599
Aircharger Intake System - K&N 63-2593 Performance Intake Kit (Non-CARB Compliant)
K&N 63-2593 Performance Intake Kit (Non-CARB

Aircharger Intake System

The K&N 63-2593 Air Charger air intake system replaces the restrictive factory air filter and air intake housing on specific Ford F150 EcoBoost models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body and turbo inlet for a guaranteed power gain. The tube accommodates the factory air temperature sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle's existing factory mounting points. The tools needed are a screwdriver and an Allen wrench.

  • Guaranteed to Increase Horsepower
  • Designed to improve throttle response and engine sound
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces entire factory air intake system
  • Free-flowing high density polyethylene tube
  • Brand: K&N
  • ASIN: B01BNUSEZ8
  • UPC: 024844358202
  • Part No: 63-2593
Aircharger Intake System - K&N 63-9034 AirCharger Performance Air Intake System
K&N 63-9034 AirCharger Performance Air Intake

Aircharger Intake System

The K&N AirCharger 63-9034 air intake system replaces your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-9034 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. This allows cooler, denser air to be directed through a custom molded intake tube into the engine's throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install requiring only a screwdriver, pliers, socket set and several wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Estimated horsepower gain of 12.18 HP at 4600 RPM
  • Designed to improve throttle response and engine sound
  • Easy to install, usually in 90 minutes or less
  • Replaces entire factory air intake system. Air Filter Material: Cotton Gauze
  • Not legal for highway use in states adopting California emission regulations
  • Brand: K&N
  • ASIN: B0049MAYU6
  • UPC: 024844277053
  • Part No: 63-9034
Aircharger Intake System - K&N 63-3105 Performance Air Intake System
K&N 63-3105 Performance Air Intake

Aircharger Intake System

The K&N Air Charger 63-3105 air intake system for select Chevrolet Camaro models replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to smooth and straighten air flow, dramatically reducing air intake restriction. The 63-3105 allows your Camaro's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. An included heat shield installs into the same area as the factory air box, keeping hot air from the engine away from the air filter. The custom molded air intake tube directs this cooler, denser air to the engine's throttle body for a guaranteed horsepower gain. Depending on driving conditions, the included oversized, chrome-topped K&N high-flow air filter can be used for up to 100,000 miles before servicing is needed. The easy installation process of this air intake system normally takes less than 90 minutes, and requires only a socket set, a flat blade screwdriver, a Torx screwdriver and a few wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Guaranteed horsepower gain
  • Designed to improve throttle response and engine sound
  • Free-flowing high density polyethylene tube
  • Replaces entire factory air intake system
  • K&N Million Mile Limited Warranty
  • Brand: K&N
  • ASIN: B07B598MYC
  • UPC: 024844367549
  • Part No: 63-3105
Aircharger Intake System - K&N 63-1566 AirCharger Performance Air Intake System for Jeep Wrangler JK 3.6L V6
K&N 63-1566 AirCharger Performance Air Intake System for Jeep Wrangler JK 3.6L

Aircharger Intake System

The K&N AirCharger 63-1566 air intake system replaces the restrictive factory air filter and air intake housing in some Jeep Wrangler models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your Wrangler's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-1566 air intake comes with a chrome topped K&N high-flow air filter and a K&N embossed heat shield that mounts into the lower air box to act as a cover allowing cooler, denser air to be directed through a custom molded intake tube into the engine's throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install requiring only a screwdriver, a socket set and several wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • NOTE: Refer user manual before use
  • Estimated horsepower gain of 12.2 HP at 5600 RPM
  • Designed to improve throttle response and engine sound
  • Easy to install, usually in 90 minutes or less
  • Replaces entire factory air intake system
  • Not legal for highway use in states adopting California emission regulations
  • Brand: K&N
  • ASIN: B009O4S1QI
  • UPC: 024844319876
  • Part No: 63-1566
Aircharger Intake System - K&N Performance Air Intake Kit 63-1561 with Lifetime Red Oiled Filter for 2009 Dodge Ram Pickup Truck 1500 2500 5.7L V8
K&N Performance Air Intake Kit 63-1561 with Lifetime Red Oiled Filter for 2009 Dodge Ram Pickup Truck 1500 2500 5.7L

Aircharger Intake System

K&N 63 Series AirCharger Performance Intake Kit replaces the vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger amount of air than the OEM air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The filters on these kits are washable and reusable.

  • Estimated horsepower gain of 15.66 HP at 4688 RPM. The air filter height is 8 inches (203 mm)
  • Designed to improve throttle response and engine sound
  • Easy to install, usually in 90 minutes or less ; Lasts up to 100,000 miles before service is required
  • Replaces entire factory air intake system. Free-Flowing High Density Polyethylene Tube
  • Not legal for highway use in states adopting California emission regulations
  • Brand: K&N
  • ASIN: B003CR2ILM
  • UPC: 024844265180
  • Part No: 63-1561
Aircharger Intake System - S&B Filters 75-5127 Cold Air Intake for 2017-2018 Jeep Wrangler JK 3.6L (Cotton Cleanable Filter)
S&B Filters 75-5127 Cold Air Intake for 2017-2018 Jeep Wrangler JK 3.6L (Cotton Cleanable

Aircharger Intake System

312-132 313-132 roush spectre 9007 2007 magnum stage cool power 2011 usa rack cover 2009 2010 unlimited king accessories empire engineering cooler intakes sound systems high roto razor dyno bike tool one piece volume 75 carb balance 2017 upgrades cai 360 generation next used sale legal kn flow fuel crank wheels induction cleaner blackhawk jegs screwdriver set tj throttle body platinum wrench baxter california jeg assembly inlet custom aftermarket motor trick mopar oil mdr 310 la totally awesome red dry box 2018 mxp

  • 46.78% More Airflow & 99.46% Efficiency Rating. Tested To The Internationally Accepted ISO 5011 Standard
  • Designed To Avoid Check Engine Lights
  • Premium Silicone Parts Last Longer And Look Better
  • S&B utilizes robotics to precisely apply the correct amount of oil to your filter before it ships. Oil Amount: 70 Grams on Filter Element. Replacement Filter: KF-1057 & Filter Wrap: WF-1057
  • CARB Pending
  • Brand: S&B
  • ASIN: B07GY3WZ6K
  • UPC: 841372037856
  • Part No: 75-5127
Aircharger Intake System - K&N 63-1578 Performance Air Intake System
K&N 63-1578 Performance Air Intake

Aircharger Intake System

The K&N AirCharger 63-1578 air intake system replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1578 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that directs cooler air into the custom molded intake for a power gain. The oversized air filter can be used for up to 100, 000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install using commonly available tools. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • horsepower gain
  • Designed to improve throttle response and engine sound
  • Free-Flowing High Density Polyethylene Tube
  • Replaces entire factory air intake system
  • Not legal for highway use in states adopting California emission regulations
  • Brand: K&N
  • ASIN: B07PRJRQ3M
  • UPC: 024844373120
  • Part No: 63-1578
Aircharger Intake System - K&N Performance Cold Air Intake Kit 63-1564 with Lifetime Filter for Dodge Challenger/Charger, Chrysler 300 3.6L V6
K&N Performance Cold Air Intake Kit 63-1564 with Lifetime Filter for Dodge Challenger/Charger, Chrysler 300 3.6L

Aircharger Intake System

The K&N AirCharger 63-1564 air intake system replaces your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-1564 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that mounts onto the inner fender. This allows cooler, denser air to be directed through a custom molded intake tube into the engine's throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install requiring only a screwdriver, socket set and several wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Estimated horsepower gain of 8.09 HP at 5231 RPM
  • Designed to improve throttle response and engine sound
  • Easy to install, usually in 90 minutes or less
  • Replaces entire factory air intake system
  • Not legal for highway use in states adopting California emission regulations
  • Brand: K&N
  • ASIN: B007ISGIOE
  • UPC: 024844305725
  • Part No: 63-1564

Aircharger Intake System E846 Search Results

Looking for more Aircharger Intake System similar ideas? Try to explore these searches: Shower Candy Mold, Leprechaun Womens Hoody Zip Sweatshirt, and Inspired Plasma Tv.

Aircharger Intake System - Popular Video Reviews

Install K&N Aircharger Intake System on Harley Davidson | Law Abiding Biker Podcast

Aircharger Intake System

Law Abiding Biker Podcast: www.LawAbidingBiker.com This is a Law Abiding Biker (LAB Media) Production. In this video we teach you step by step w/o skipping any steps how to install K&N Aircharger air intake to your Harley Davidson motorcycle. K&N Part #63-1122P (http://www.knfilters.com/search/...

  • Likes: 142
  • View count: 25545
  • Dislikes: 5
  • Comments: 14
Tags: biker podcast,motorcycle podcast,law abiding biker,k&n,k&n aircharger,k&n air intake,k&n motorcyc...

K&N 63 Series AirCharger Air Intake

Aircharger Intake System

K&N 63 Series AirCharger Air Intake available at http://www.autoaccessoriesgarage.com/Air-Intake-Systems/K-N-63-Series-AirCharger-Air-Intake

  • Likes: 1
  • View count: 1120
  • Dislikes: 0
  • Comments: 0
Tags: K&N 63 Series AirCharger Air Intake,AutoAccessoriesGarage,SEMA,2016

K&N Performance Cold Air Intake System Kit Fuel Injected Performance Kit AirCharger

Aircharger Intake System

K&N Performance Cold Air Intake System Kit Fuel Injected Performance Kit AirCharger http://www.jegs.com/v/K-N/599?N=900599+1181704&Nrpp=180&Tab=GROUP&storeId=10001&catalogId=10002&langId=-1 ------------------------------------------------------------------------------------------------ Follow JE...

  • Likes: 0
  • View count: 1007
  • Dislikes: 0
  • Comments: 0
Tags: JEGS,k&n,kn,performance,cold,air,intake,system,kit,aircharger,charger


365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.