Compare Prices

Antenna Tower Kit

Antenna Tower Kit - Channel Master CM-1850 Telescoping Steel Antenna Mast 41 FT
Channel Master CM-1850 Telescoping Steel Antenna Mast 41

Antenna Tower Kit

The Channel Master 40’ Telescoping Mast is a 40-foot long, 18-gauge, galvanized steel telescoping mast used for TV antenna mounting.

  • Includes Guy Rings, Mast Clamps, Platform Pins & Installation Guide
  • 18 Gauge Galvanized Steel
  • Diameter: Top = 1.25'' in., Bottom = 2.25" in.
  • Maximum Extended Length: 41.0' ft
  • Minimum Collapsable Length: 9.0' ft
  • Color: Silver
  • Brand: Channel Master
  • ASIN: B007RGF2WG
  • UPC: 020572016506
  • Part No: CM-1850
Antenna Tower Kit - Lava HD8008 Omnidirectional Outdoor TV Antenna HD TV 4K 360 Degree OmniPro HD-8008 + Installation Kit & TV Antenna Jpole
Lava HD8008 Omnidirectional Outdoor TV Antenna HD TV 4K 360 Degree OmniPro HD-8008 + Installation Kit & TV Antenna

Antenna Tower Kit

Product featuresSold by Digihitech Exclusive. Package includes, 1x HD8008 Antenna, 1x installation Kit, 1x Antenna Mounting poleOmnidirectional characteristics, receiving reception from multiple directions without needing adjustments. Built-in dipole for excellent UHF and VHF band signal reception. DVB-T; ISDB-T; DMB-T/H; ATSCIdeal Distance 40-80 miles (reaches up to 130 miles) This is long range antenna best use for outdoor, so if you live very close to TV tower, you need to get a Indoor Antenna or the signal will be overshoot.Note: make sure to scan channels after install the antenna, or it may show 0 Channel. Antenna cable can not be longer than 50 ft, or it may receive 0 or less than it should be.Product descriptionLAVA HD8008 Omnidirectional Antenna is specially designed omnidirectional antenna that will receive both the VHF and the UHF TV signals without rotating. A latest concept for digital outdoor analog and terrestrial HDTV broadcasting reception. The antenna is one of the best solutions for both home and portable digital TV reception. Complete accessories are included for either wall or pole mounting. RV supported. Free Installation kit includes 1x 40ft Coax cable1x 4-way splitter (to watch on more TVs)15x cable clips.Note:Please understand that this is a simulation an...

  • Sold by Digihitech Exclusive. Package includes, 1x HD8008 Antenna, 1x Free FiveStar installtion Kit, 1x Five Star Antenna Jpole
  • Omnidirectional characteristics, receiving reception from multiple directions without needing adjustments. Built-in dipole for excellent UHF and VHF band signal reception. DVB-T; ISDB-T; DMB-T/H; ATSC
  • Ideal Distance 40-80 miles (reaches up to 130 miles) Received up to 130 Free HD Channels (Depends entirely on the surrounding condition)
  • Please note, make sure to scan channels after install the antenna, or it may show 0 Channel. Antenna cable can not be longer than 50ft, or it may receive 0 or less channels than it should be. This is long range antenna, so if you live very close to TV tower, you need to get a Indoor Antenna.
  • Brand: LAVA
  • ASIN: B075KZLTZ9
  • UPC: 840449110874
  • Part No: LAVATV4KANTE
Antenna Tower Kit - ANTOP Adjustable Outdoor/Attic TV Antenna Mount Pole, Stainless Painting, 19 inch Arm Length, Reversible, Lightweight, Waterproof, Easy Installation
ANTOP Adjustable Outdoor/Attic TV Antenna Mount Pole, Stainless Painting, 19 inch Arm Length, Reversible, Lightweight, Waterproof, Easy

Antenna Tower Kit

The ANTOP J Pole - Outdoor TV Antenna Mount, with weather -resistant material, is ideally for outdoor use. The included mounting accessories enable you to install easily. Its adjustable angle, base pivot allows for flat, angled, or vertical use and supports roof, attic, or sidewall installations. Engineered and designed in the USA by ANTOP, the antenna specialists, found in 1980. the 19in mast, 1.3in diameter TV Antenna Mount is suitable for all types of outdoor antennas. Product Information Color: Painted Black Size: 19 x 1.3in What’s in the box J Pole Mounting Accessory Instructions /User Manual Instructions de Installation end Española Technical Specification Arm Length:19in Fixing Plate/Pole: Thickness 0.06in Pole Diameter: 1.3in Weight: 1.6lb

  • SOLID & DURABLE STRUCTURE: With included accessories, it keeps the antenna fixed at the optimum signal receiving direction and stainless while exposure to the outside.
  • ADJUSTABLE ANGLES: The mounting pole can be rotated 90 degree, perfect base pivot for flat, angle, or vertical use.
  • EASY INSTALLATION: Comes with all the screws and plastic anchors, super easy to installation.
  • MODERN DESIGN: It adopts painted steel tube, 19in. x 1.3in.
  • BUYYER GUARANTEE: We stand behind our mounting J-pole 100% with a 12-month warranty and 30-day full refund.
  • power_source_type : Corded Electric
  • Color: Antenna Mounting Pole
  • Brand: ANTOP
  • ASIN: B076VN3HN1
  • UPC: 615116694823
  • Part No: 4332703572
Antenna Tower Kit - ROHN 45SS040 45G Series 40' Self Supporting Tower Kit, No Ice
ROHN 45SS040 45G Series 40' Self Supporting Tower Kit, No

Antenna Tower Kit

*If your installation exceeds the load/wind/ice ratings put forth by Rohn (see attached documents) you must bracket and/or guy your installation. These items are not provided and can be purchased separately. Grounding kits are also available for purchase separately (see Rohn BGK3G) **These tower sections must ship via FREIGHT. Your delivery location must be able to accept a full size semi. If a forklift is not available at the delivery location (such as a residence or business without a dock), you will be required to unband the pallet and remove the tower sections from the truck by hand (average weight is 70 lbs per section). When the freight company contacts you to schedule a delivery appointment they will ask you if you require a liftgate at delivery - this would allow the driver to remove the pallet as a whole from the truck. This service is not standard and not included in your cost - if you wish to have a liftgate you will be responsible for those charges at delivery.

  • INCLUDES: (1) ROHN 45AG2 STANDARD 9' 6" TOP SECTION, (1) ROHN SB45G 5' SHORT BASE FOR EMBEDMENT IN CONCRETE, (3) 45G STANDARD 10' SECTION, (1) ACWS ANTI-CLIMB WARNING SIGN KIT, AND ROHN 45G SELF-SUPPORTING TOWER SPECIFICATIONS. *This kit is shipped via freight only, see below for more information* *Be sure your contact number is current on your order*
  • The ROHN 45G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 45G Guides for Specifications and Installation Requirements*
  • 1-1/4" OD, 14 Gauge legs 7/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on a 16 3/4" equilateral triangle design
  • Each section contains all required nuts and bolts shipped with each section. 45AG2 Features a tapered top and integrated mounting pipe. The mounting pipe is 2.38" OD / 2.07" Mounting PipeOverall length is 9'6" - see images for measurement breakdown. See description below for more information.
  • 45G Weight: 70 lbs. 45AG2 Weight: 66 lbs. SB45G Weight: 32 lbs
  • Brand: ROHN
  • ASIN: B072XYDYKR
  • UPC: 636134506745
  • Part No: R-45SS040
Antenna Tower Kit - ROHN 45G Series 50' Basic Tower Kit
ROHN 45G Series 50' Basic Tower

Antenna Tower Kit

These kits use the bottom 10' section to embed in a concrete pad - you can embed 5' depending on your installation need. See note below for specification limitations. You can also purchase a variety of base sections, base plates, brackets, etc to accommodate this kit - see our store. *There are no wind/ice/load guidelines for 50' 45G Tower without being guyed or bracketed - you must consult a professional installer. We make no claims that this set up will handle any certain wind/ice/load specifications. This kit is offered as a convenience to our customers* *Rohn 45G is NOT rated self-supporting over 45'. Your tower will need to be guyed and/or bracketed according to the specifications in the Rohn 45G Guide. See Rohn or Antenna Parts Outlet website for this information* * Professional Installation Required. If your installation exceeds ice/wind/load ratings you must guy or bracket your tower* **These tower sections must ship via FREIGHT. Your delivery location must be able to accept a full size semi. If a forklift is not available at the delivery location (such as a residence or business without a dock), you will be required to unband the pallet and remove the tower sections from the truck by hand (average weight is 70 lbs per section). When the freight company contacts you to sc...

  • INCLUDES: (1) ROHN 45AG2 STANDARD 9' 6" TOP SECTION, (4) 45G STANDARD 10' SECTION. 50' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete
  • The ROHN 45G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 45G Guides for Specifications and Installation Requirements*
  • 1-1/4" OD, 14 Gauge legs 7/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on a 16 3/4" equilateral triangle design
  • Each section contains all required nuts and bolts shipped with each section. 45AG2 Features a tapered top and integrated mounting pipe. The mounting pipe is 2.38" OD / 2.07" Mounting PipeOverall length is 9'6" - see images for measurement breakdown. See description below for more information.
  • 45G Weight: 70 lbs. 45AG2 Weight: 66 lbs. *This kit is shipped via freight only, see below for more information*
  • Brand: ROHN
  • ASIN: B07HJB2L7P
  • UPC: 636134507254
  • Part No: 45g50basic
Antenna Tower Kit - CHANNEL MASTER Antenna Mast Telescoping Antenna Mast (25ft) (CM-1830)
CHANNEL MASTER Antenna Mast Telescoping Antenna Mast (25ft)

Antenna Tower Kit

The CHANNEL MASTER telescoping antenna mast (25 ft.) is made of 18-gauge, galvanized steel. It comes collapsed at 9 ft., then expands to 25-1/3 ft. Top diameter is 1-1/4 in. And bottom diameter is 1-1/2 in. WEIGHT is 22.5 lbs.

  • 18-gauge Galvanized steel
  • Includes hardware
  • 90-day limited warranty
  • 25ft
  • Brand: Channel Master
  • ASIN: B000UEBT7E
  • UPC: 020572016308
  • Part No: CM-1830
Antenna Tower Kit - ROHN BGK3G Tower Base Grounding Kit for Revision F 25G / 45G Towers
ROHN BGK3G Tower Base Grounding Kit for Revision F 25G / 45G

Antenna Tower Kit

  • Primarily for 25G and 45G Revision F Towers with Fixed Bases
  • Includes: (1) 10' Coil #4 Solid Copper Wire, Tinned (1) 5/8" x 10' Hot Dip Galvanized Ground Rod (1) 5/8" Ground Rod Clamp (1) 5/16" x 2-3/8" Grade 5 Galvanized Bolt (1) 5/16" Hex Galvanized Nut (1) Hy-Lug YA4C-L4 Compression Terminal Lug
  • This kit includes enough material to ground at ONE tower base section joint bolt.
  • Note: Lug does not come crimped on the copper wire
  • **Freight Only Item - Order with your tower to save on freight costs**
  • Brand: ROHN
  • ASIN: B0131F0QWW
  • UPC: 636134501900
  • Part No: BGK3G
Antenna Tower Kit - ROHN 25SS010 25G Series 10' Self Supporting Tower Kit, No Ice
ROHN 25SS010 25G Series 10' Self Supporting Tower Kit, No

Antenna Tower Kit

*If your installation exceeds the load/wind/ice ratings put forth by Rohn (see attached documents) you must bracket and/or guy your installation. These items are not provided and can be purchased separately. Grounding kits are also available for purchase separately (see Rohn BGK3G) **These tower sections must ship via FREIGHT. Your delivery location must be able to accept a full size semi. If a forklift is not available at the delivery location (such as a residence or business without a dock), you will be required to unband the pallet and remove the tower sections from the truck by hand (average weight is 45 lbs per section). When the freight company contacts you to schedule a delivery appointment they will ask you if you require a liftgate at delivery - this would allow the driver to remove the pallet as a whole from the truck. This service is not standard and not included in your cost - if you wish to have a liftgate you will be responsible for those charges at delivery.

  • INCLUDES: (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION, (1) ROHN SB25G5 5' SHORT BASE FOR EMBEDMENT IN CONCRETE, (1) ACWS ANTI-CLIMB WARNING SIGN KIT, AND ROHN 25G SELF-SUPPORTING TOWER SPECIFICATIONS. *This kit is shipped via freight only, see below for more information*
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements*
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information.
  • Ships via freight only. See below for important shipping details. *Be sure your contact number is current on your order for freight delivery*
  • Brand: ROHN
  • ASIN: B06XKD54RH
  • UPC: 636134506400
  • Part No: 25SS010
Antenna Tower Kit - Vansky Adjustable Attic Antenna Mount - Outdoor TV Antenna Mounting Pole Universal Mount Brackets - Easy Installation, Solid Structure, Weather Proof
Vansky Adjustable Attic Antenna Mount - Outdoor TV Antenna Mounting Pole Universal Mount Brackets - Easy Installation, Solid Structure, Weather

Antenna Tower Kit

Vansky Universal TV Antenna with J-Mount Bracket All acessoried you need to mount your outdoor antenna / satellite dish to your roof is included. Universal Outdoor TV Antenna Mounting Pole universal Outdoor TV Antenna Mounting Pole is a quick and economical mount for adding antennas to any mounting situation. It can quickly adapt to many different pole installations: the mount can be set up for roof, attic, or sidewall installations. Installation 1. Select a desired mounting location. 2. Place the mast through the mounting base of the J-pole. 3. Level up the mounting base and then mark the pilot holes to be drilled with a marking pen. 4. Drill the pilot holes (with a drill bit about half the diameter of the bolt) into the marked areas. 5. Line up the holes of the mounting base of the J-pole with the drilled holes. 6. Drill and then secure the lag bolts into the pilot holes. 7. If necessary, you may adjust the direction of the mast by loosening the two lateral nuts on the mounting base of the J-pole. Our Warranty At Vansky, we stand strongly behind the craftsmanship of Our Brand Products. That's why we back them with 45 Days Money Back & One Year Hassle Free Guarantee and provide Friendly, Easy-to-reach Support.

  • Reversible Design -- Both ends of the J-pole antenna mount can be used.
  • Wall Mounts & Brackets -- Best accessory for you to mount your outdoor antenna. With best size design, it can fit most outdoor antennas.
  • Adjustable direction -- The mounting pole can be rotated 60° for best reception angle to get strongest signals.
  • Easy installation -- Comes with all the screws and plastic anchors, super easy to assemble.
  • WHAT YOU GET -- Vansky Outdoor Antenna Mount Together With 45 Days Money Back and one year guarantee and friendly, easy-to-reach support. For the Suitable TV Antenna Outdoor,You can purchase our Vansky Outdoor TV Antenna 150 miles Here:B071V7SV6P.
  • Brand: Vansky
  • ASIN: B0744DCJVW
  • Part No: VS-TXM01-V
Antenna Tower Kit - McDuory Outdoor 150 Miles Digital Antenna 360 Degree Rotation Amplified HDTV Antenna -Support 2 TVs-UHF/VHF/1080P/4K - Infrared Remote - 40ft RG6 Cable and Mounting Pole Included
McDuory Outdoor 150 Miles Digital Antenna 360 Degree Rotation Amplified HDTV Antenna -Support 2 TVs-UHF/VHF/1080P/4K - Infrared Remote - 40ft RG6 Cable and Mounting Pole

Antenna Tower Kit

McDuory Outdoor 150 Miles Digital Antenna 360 Degree Rotation Amplified HDTV Antenna -Support 2 TVs-UHF/VHF/1080P/4K - Infrared Remote - 40ft RG6 Cable and Mounting Pole Included This Outdoor HDTV antenna is designed to receive digital TV UHF/VHF signals while providing high quality HDTV pictures. You can enjoy HDTV without the high cost of cable or satellite. With a built-in rotor, turn a full 360 degrees using the infrared remote control. Features:1. Easy-to-follow user manual for perfect and easy Tools-free installation 2. Built-in Low-Noise and High Gain Amplifier 3. Built-in motor turns the antenna 360 degrees 4. Motor turns in both directions to avoid tangles 5. Infrared remote controller Control Box with Dual TV Outputs is included 6.Recommended to be mounted 30 feet above ground Specifications:Working Frequency: VHF 170~230MHz, UHF 470~890MHz Nose Figure: < = 2.5dB Typical Antenna Gain: VHF 28~32dB, UHF 32~36dB Reception Range: 150 Miles Channels: 1~12, 21~69 Impedance: 75Ohm Max Output Level: 105dB u V Main Voltage: AC120V +/- 10% / 60Hz Operation Temperature: -10 degree ~ 50 degree Coaxial Cable Length: 40FT Package Dimensions: 17.5*12.24*4.02 inches with 6.4 Pounds Packaging Contents 1 X HDTV Yagi Antenna Built-in amplifier 1 X Motor-Fixed bolster with 40ft Coaxia...

  • 150 Miles Long Range and Dual TV Outputs -- HDTV support 720p, 1080p. Working Frequency: VHF 40~300 MHz, UHF 470~890 MHz. Receive free digital broadcast high HDTV signals. Support 2 TVs at the same time without a Splitter. No special Adaptor required.
  • Tools-Free installation -- Snap On elements. Comes with an easy-to-follow user manual so you can install the antenna with ease. Pole included: Mounts to the J-shape pole with McDuory antenna. Do not need to extra-prepare one.
  • Infrared Remote Controller -- Built-in 360 degree motor rotor. Built-in Super High Gain and Low Noise Amplifier. Include 40ft outdoor TV antenna Coaxial Cable. Easy for you to place it to get the best receptions.
  • Weather Resistant -- McDuory antenna is lightning protected, durable design with grounding done. Superior construction to withstand tough outdoor weather conditions.
  • McDuory Comprehensive Warranty - We stand behind our antenna 100% with a ONE year warranty and 45 days Money back. Please Note: Freeview receptions are dependent upon environmental factors, we can not guarantee receptions in all conditions.
  • Brand: McDuory
  • ASIN: B074CHS7CP
  • UPC: 799460040168
  • Part No: 4330082371

Antenna Tower Kit J694 Search Results

Looking for more Antenna Tower Kit similar ideas? Try to explore these searches: Chain Vest Set, Natural Diamond Fashion Bracelet, and Third Eye Agate.

Antenna Tower Kit - Popular Video Reviews

Tilt-Over Crank-Up Antenna Mast

Antenna Tower Kit

This video details the tilt-over crank-up antenna mast I use with one of my 27 ft Low-noise vertical antennas. In this video I explain some details on the construction and deployment of the antenna. The design is based on ideas I have gathered from the web and modified for my QTH. The metal tu...

  • Likes: 724
  • View count: 164800
  • Dislikes: 30
  • Comments: 113
Tags: tilt over,tilt-over,antenna,antenna mast,tilt over mast,tilt over antenna,radio,ham,amature,amate...

Military Surplus Base Station Antenna Mast

Antenna Tower Kit

Base station antenna mast made from military surplus kit supporting Solarcon I-Max 2000 5/8 wave antenna.

  • Likes: 76
  • View count: 12002
  • Dislikes: 2
  • Comments: 11
Tags:

Ham Radio Mast for Antenna | Setup & Review

Antenna Tower Kit

I make a small commission for purchases made through the following links. 👍 MFJ Fiberglass Mast https://amzn.to/2W1ZgN0 👍 Yaesu 891 https://amzn.to/2RLdPVY 👍 MFJ manual tuner https://amzn.to/2WarftS 👍 Icom-7300: https://amzn.to/2srAkRD 👍 TekPower: 13.8V Power https://amzn.to/2SQeF0T 👍 G5RV Ante...

  • Likes: 264
  • View count: 33183
  • Dislikes: 21
  • Comments: 54
Tags: antenna mast,ham radio,mast,ham radio antenna mast,ham radio mast,portable radio mast,ham radio t...


365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.