Compare Prices

Big Air Intake

Big Air Intake - Arlen Ness 18-803 Big Sucker Performance Air Filter Kit
Arlen Ness 18-803 Big Sucker Performance Air Filter

Big Air Intake

Feature a one-piece aluminum backing plate/CARB support bracket eliminate the need for Banjo fittings, hoses and filter breather passages exit at the mouth of the carburetor/throttle body, creating a virtually closed-loop system.

  • Color: Black
  • Brand: Arlen Ness
  • ASIN: B000WJBF58
  • UPC: 172303060583
Big Air Intake - Edelbrock 7562 Performer RPM Air-Gap Intake Manifold
Edelbrock 7562 Performer RPM Air-Gap Intake

Big Air Intake

The Edelbrock Performer RPM Air-Gap Intake Manifold is designed for high-performance rectangular-port big block cylinder heads. The new RPM air-gap incorporates the race-winning technology that has been used in the Victor Series intakes. The open air space separates the runners from the hot engine oil, and as a result, the air/fuel mixture stays cooler for a denser charge and more power. It includes rear water outlets, two distributor clamp locations and nitrous bosses. It accepts all late model alternators and A/C brackets for the street and is for square-bore carburetors only. The manifold height is 4.45 inch in the front and 6.0 inch in the rear. The port dimensions are 2.24 inch tall by 1.60 inch wide. The runners are tuned to move the power band 1,000 RPM higher than Performer air-gap manifolds, from idle-5,500 RPM up to 1,500-6,500 RPM. It has no provision for exhaust heated chokes and no exhaust crossover.

  • Brand: Edelbrock
  • ASIN: B00062ZHC8
  • UPC: 085347075621
Big Air Intake - Professional Products 53001 Satin Cyclone Intake Manifold for Big Block Chevy
Professional Products 53001 Satin Cyclone Intake Manifold for Big Block

Big Air Intake

The Cyclones are Professional Products' lowest profile small block Chevy manifolds and are also street-legal on pollution-controlled vehicles. Cyclone manifolds are set up to accept a spread bore carb, but come with an adapter plate that permits the use of square bore carbs. To remain street-legal with a square bore carb, you must use one that is also approved as street-legal for your application. These Professional Products Cyclone manifolds are available in a variety of configurations to suit your needs.

  • Brand: Professional Products
  • ASIN: B001Q6GSF8
  • UPC: 665053530012
Big Air Intake - Chimera S Cold Air Intake for Big Bore Throttle Body Honda Grom 125 - Tiffany
Chimera S Cold Air Intake for Big Bore Throttle Body Honda Grom 125 -

Big Air Intake

Chimera Engineering S Cold Air Intake for Big Bore Throttle Body. Silicone air intake designed for the Honda Grom 125 owner who upgraded to the bigger Koso or Takegawa throttle body. Chimera Engineering S Cold Air intake is positioned to allow a more direct, more cooler and fresher air into your engine, giving you better throttle response and better performance. Increase air flow and at the same time, get a nice deep throaty intake sound while you cruise around! Chimera Engineering S Cold Air intake System contents and options: - Chimera S 3 ply Silicone Intake tube - 2x Hose Clamp - K&N Chrome Air Filter (Pre-oiled with lifetime warranty) Note: When installing the short ram intake, make sure the battery is unplugged. This will allow the ECU to reset the existing parameter and refresh itself to the new change. Like any aftermarket air intake system for the automotive and powersport industry, not recommended to be used in rain.

  • Color: Tiffany
  • Brand: Chimera
  • ASIN: B01J7HFFKQ
  • UPC: 724716211566
Big Air Intake - TIROL Air Filter Round Tapered Mini Power Stack Auto Cold Air Intake Diameter 3
TIROL Air Filter Round Tapered Mini Power Stack Auto Cold Air Intake Diameter 3"

Big Air Intake

More filtering surface than original filter It comes with a washable and reusable dry cone air filter, a Clamp Filter can be washed & oiled Easy Installation, Works with 76mm air intake systems

  • Color: T11649
  • Brand: TIROL
  • ASIN: B00N0PYBIO
  • UPC: 702334347270
Big Air Intake - Astra Depot 64mm-75mm 3 Inch Cold Air Intake Inlet Pipe Hose Tube Universal System Kit
Astra Depot 64mm-75mm 3 Inch Cold Air Intake Inlet Pipe Hose Tube Universal System

Big Air Intake

Specifications: • Condition: 100% Brand New • Package includes: • » 1X Car Cold Air Intake Pipe • » 2X Hose Clamps • » 1X Silicone Reducer • » 1X Silicone Tube • » 1X Mounting Bracket • Air Intake Pipe Size: Length: 10 15/64'' (26cm) • Inner Diameter: 72mm • Outer Diameter: 75mm • (As the picture shown) • Color: Silver Intake Pipe + Black Silicone Reducer + Blue Silicone Tube • Material: Aluminum + Silicone • Weight: 460g Feature: • Optimize throttle response, generate explosive horsepower output, improve torque and fuel / gas mileage. • Funnel-shaped Air Filter - Direct Cold Air Inward, Boost Air Speed and Generate. • Aluminum Finished Injection Pipe - Durable and Washable. • Fit For any 64mm / 75mm Air Intake Hose (Reducer included for adjustment) Fitment: • Universally fit for vehicle with the diameter of air intake hose at 75mm or 64mm (with silicone reducer). * Note: • Instruction is not included. * Please read all description & fitment before ordering the product. * All of our packages are shipped from Hong Kong, and it normally takes 7-20 business days to receive Your satisfaction is our utmost concern. Please contact us to resolve any issue before leaving any neutral or negative feedback

  • Brand: Astra Depot
  • ASIN: B017UC38ZE
Big Air Intake - Assault Racing Products PC2025 Small Block Chevy Dual Plane Air Gap Polished Aluminum Intake 1500-6500 RPM SBC
Assault Racing Products PC2025 Small Block Chevy Dual Plane Air Gap Polished Aluminum Intake 1500-6500 RPM

Big Air Intake

In our opinion these are not $400.00 show quality polished intakes. Flaws in the polish such as scuffs and marks will require more polishing to enhance the finish. This is a new polished aluminum dual plane intake for small block Chevy. 180° high rise design, big power over a wide RPM range. Has the open air area under the carb pad to help keep fuel mixture cool and improve power. Ideal for everyday to high performance street applications, will produce power in the lower RPM range and not kill your bottom end like a single plane would. These intakes are produced from steel molds to reduce core shift, have all the major features found on the expensive ones such as 4 corner water outlets and nitrous bosses, and the best part - the price! Intake works with 283-400 small blocks up to 1995. Includes special adapter bushings for the middle holes on the '87 to '95 heads. Does not fit the newer Vortec heads. For use with square bore style carbs. Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. No provision for manual choke or exhaust crossover and are not EGR equipped. Manifold Specifications: Part Number: PC2025 RPM Range: 1500 - 6500 Intake Port Dimensions: 2.09" x 1.25"*1 Manifold Height: 4.65" NOTE (1) - port is intentionally le...

  • Color: Polished
  • Brand: Assault Racing Products
  • ASIN: B00S75GKF4
Big Air Intake - Cobra PowrFlo Air Intake Kit - Black 06-0267B
Cobra PowrFlo Air Intake Kit - Black

Big Air Intake

Flows better than competing units in large part because of unique internal venturi design High Flow K&N Air Filter element ensures the best air intake and maximum protection for your engine The PowrFlo Systems consists of an aluminum cover and all the fasteners, seats, backing plate and mounting hardware to make for an easy installation Formed stainless steel mesh insert in the dual entry ports to keep out bugs and debris Powder coated mounting cover Aluminum cover available in black or chrome finish Recommended use with the Fi2000 fuel tuner to optimize the bikes fuel because of the additional air flow available from PowrFlo Air Intake System This item fits the following applications: 2014-2016 Yamaha XVS950 Bolt R-Spec 2014-2016 Yamaha XVS950 Bolt

  • Color: Black
  • Brand: Cobra
  • ASIN: B00IQDS90Q
Big Air Intake - Arlen Ness 18-326 Black Big Sucker Stage I Air Filter Kit with Cover
Arlen Ness 18-326 Black Big Sucker Stage I Air Filter Kit with

Big Air Intake

Features a one-piece aluminum backing plate/CARB support bracket with patented hidden breather technology and radius air inlet eliminates the need for Banjo fittings, hoses and filter breather passages exit at the mouth of the carburetor/throttle body, creating a virtually closed-loop system.

  • Color: Black
  • Brand: Arlen Ness
  • ASIN: B0041P5T7E

Big Air Intake K231 Search Results

Looking for more Big Air Intake similar ideas? Try to explore these searches: Family Photo Album, Silver Playstation 2, and Pink Strappy Dress.

Big Air Intake - Popular Video Reviews



365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.