Compare Prices

Bipolar Stepper Motor Controller

Bipolar Stepper Motor Controller - TB6600 4A 9-42V Stepper Motor Driver CNC Controller with Stepper Motor Nema 17 Bipolar 1.7A 40N.cm Holding Torque and Motor Mounting Bracket for 3D Printer Hobby CNC Router XYZ by Beauty Star
TB6600 4A 9-42V Stepper Motor Driver CNC Controller with Stepper Motor Nema 17 Bipolar 1.7A 40N.cm Holding Torque and Motor Mounting Bracket for 3D Printer Hobby CNC Router XYZ by

Bipolar Stepper Motor Controller

(1) TB6600 Stepper Motor Driver: Single chip bipolar sine microstep stepper motor driver. New BiCD 0.13 nm process. Up to 42V. 5 subdivision mode options (1/1, 1/2, 1/4, 1/8, 1/16,1/32). Output current: IOUT = 4.0A (peak, in 100ms). rated output: IOUT = 3.5 A Resistance (a +) = 0.4 Alarm output pin current:Ialert = 1mA Monitoring output pin (MO): Imo= 1mA Break through the traditional, single power supply. Built in overheating protection (TSD) circuit. Undervoltage protection, built-in (UVLO) circuit. Built-in overcurrent detection (ISD), circuit. Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode. (2) Nema 17 Stepper Motor: Motor type: Bipolar Stepper Phase Resistance: 1.5Ohm Phase Inductance: 2.8mH Detent Torque: 2.2N.cm Rotor Inertia: 54g.cm2 Holding Torque: 40N.cm Step angle: 1.8 deg Motor Weight: 280g Step angle accuracy: + - 5%(full step, not load) Resistance accuracy: + - 10% Inductance accuracy: + - 20% Temperature rise: 80deg Max(rated current, 2 phase on) Ambient temperature: -20deg ~+50deg Insulation resistance: 100MΩ Min, 500VDC Insultion Strength: 500VAC for one minute Connection: Yellow(A+), Blue(A-), Green(B+), Red(B-) Package Included: 1 x TB6600 Motor Driver 1 x Nema 17 Motor 1 x Mounting Bra...

  • Brand: Beauty Star
  • ASIN: B075WTSGK6
  • UPC: 661273114728
Bipolar Stepper Motor Controller - SainSmart 4 Axis TB6600 T4 Stepper Motor Driver Board CNC Controller for NEMA17 NEMA23 Stepper Motor
SainSmart 4 Axis TB6600 T4 Stepper Motor Driver Board CNC Controller for NEMA17 NEMA23 Stepper

Bipolar Stepper Motor Controller

Overview: TB6600-T4 4 axis driver board, using the Toshiba TB6600HG driver chip, the maximum output of 4.5A current, current stepless adjustable, 4 stepper motors can be driven at the same time, suitable for NEMA17, NEMA23 stepper motor, has a 12V power supply, can be used for MACH3 interface board or CNC controller; have large driver current, smooth running, quiet small volume, convenient installation, high cost performance. It is suitable for making CNC machines and other automation equipment. Specification: Dimensions: 166mm*88mm*34mm DC Power input type: 14V-40V Output current: 1~4.5A, current stepless adjustable Working environment: Temperature-15~50℃ Humidity

  • Brand: SainSmart
  • ASIN: B07C5L7PY5
  • UPC: 641055599882
Bipolar Stepper Motor Controller - DFRobot Dual Bipolar Stepper Motor Shield for Arduino (DRV8825)
DFRobot Dual Bipolar Stepper Motor Shield for Arduino

Bipolar Stepper Motor Controller

Introduction Do you want to do some projects with stepper motors such as a drafting instrument, a 3D printer, an auto curtain, etc...? As we all know, regular stepper motors are hard to drive, but with this stepper motor shield, you can easily drive 2 stepper motors via just 4 digital I/O's. This board is compatible with the Arduino UNO R3. Directly supports Xbee and Xbee form factor Wi-Fi, Bluetooth and RF modules. Easy connection of cables via screwless PC terminals. Each stepper motor has a code switch for adjusting driving modes, to obtain different rotational speeds. Interfaces of the board include extension 6 channel Analog I/O, 10 channel Digital I/O & I2C. Specification *Input Voltage: 8-35V DC(Just power the stepper motor driver) *Press to connect cables, quick and easy *Digital I/O:D4,D5,D6,D7 *10 channel digital I/O&6 channel Analog I/O addition *DRV8825 microstepping bipolar stepper motor driver *Up to 1.6 A output current per coil *Five different microstep resolutions (down to 1/32-step) Remind: Since this product is under upgrading version, there are two versions in the inventory. You may receive the old version or the new one randomly, sorry for the inconvenience. Here are new features of new version: 1.The new version replaces A4988 drivers with DRV8...

  • Brand: DFROBOT
  • ASIN: B014L315DW
Bipolar Stepper Motor Controller - Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini

Bipolar Stepper Motor Controller

Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins. In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include. Motors are controlled by TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time), a big improvement over L293D drivers and there are built-in flyback diodes as well. We even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit so all you have to do is solder on the included 2x20 plain header and the termin...

  • Brand: Adafruit
  • ASIN: B00TIY5JM8
  • UPC: 711978444085
Bipolar Stepper Motor Controller - Stepper Motor, Longruner Nema 17 Bipolar 42mm 37oz.in(26Ncm) 12V 0.4A Lead 3D Printer Hobby CNC 17HS13-0404S
Stepper Motor, Longruner Nema 17 Bipolar 42mm 37oz.in(26Ncm) 12V 0.4A Lead 3D Printer Hobby CNC

Bipolar Stepper Motor Controller

This is the most popular Nema 17 model. It with 1.8 deg. step angle (200 steps/revolution). Each phase draws current 0.4A at 12V, allowing for a holding torque of 26Ncm(36.8oz.in). Electrical Specification: * Manufacturer Part Number: 17HS13-0404S * Motor Type: Bipolar Stepper * Step Angle: 1.8 deg. * Holding Torque: 26Ncm(36.8oz.in) * Rated Current/phase: 0.4A * Phase Resistance: 30ohms * Inductance: 37mH+/-20%(1KHz) Physical Specification: * Frame Size: 42 x 42mm * Body Length: 34mm * Shaft Diameter: 5mm * Front Shaft Length: 20mm * D-cut Length: 15mm * Number of Leads: 4 * Lead Length: 300mm * Weight: 230g * The cable length is 300mm enqal to 11.8 inches. Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor. Package Including: 1 X Nema 17 Stepper Motor 1 x 1m Cable & Connector

  • Brand: Longruner
  • ASIN: B06Y6JCW2Z
Bipolar Stepper Motor Controller - uxcell Stepper Motor Nema 17 Bipolar 300mm 0.38NM 1.7A 4.9V 4 Lead Wires for 3D Printer CNC Router Laser Lathe Machine Stage Light Control DIY Hobby
uxcell Stepper Motor Nema 17 Bipolar 300mm 0.38NM 1.7A 4.9V 4 Lead Wires for 3D Printer CNC Router Laser Lathe Machine Stage Light Control DIY

Bipolar Stepper Motor Controller

The latest version NEMA 17 step motor with holding torque of 380mN.m. Free 2.3ft length jump wire and XH motor cable with a 4-pin 0.1 inch pitch (2.54mm) connector already fitted - ready to plug and print! It is ideal for the RepRap Prusa, Mendel 90, Rostock and similar 3D printers, as well as CNC and robotics applications. Electrical Specification:Motor Type: Bipolar StepperPhase: 2Rated Voltage:4.9VRated Current: 1.7AInductance:3.2mH +/- 20%(1KHz)Holding Torque:?380mN.mElectric Resistance:2ohms +/-10% Physical Specification:Frame Size: 42 x 42mmBody Length: 42mmShaft Diameter: 8mmShaft Length: 300mmNumber of Leads: 4Weight: 357g Wire Connection:Black(A+), Green(A-), Red(B+), Blue(B-) WARNING:As a stepper motor, it should connect to a constant current or chopper driver. Connecting the motor directly to a power supply will destroy the motor.To choose a driver, please make sure the driver output current not higher than motor rated current, and voltage not higher than 36V.Please take care of wires coils order when you connecting to driver or it will damage your driver.

  • Color: 0.38N.m
  • Brand: uxcell
  • ASIN: B077QCDRRY
Bipolar Stepper Motor Controller - Tic T825 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Tic T825 USB Multi-Interface Stepper Motor Controller (Connectors

Bipolar Stepper Motor Controller

The Tic T825 USB Multi-Interface Stepper Motor Controller is a versatile, general-purpose controller designed to control one bipolar stepper motor. With a variety of supported interfaces-USB for direct connection to a computer, TTL serial and I²C for use with a microcontroller, RC hobby servo pulses for use in an RC system, analog voltages for use with a potentiometer or analog joystick, and quadrature encoder for use with a rotary encoder dial-and a wide array of configurable settings, the Tic T825 makes it easy to add basic control of a bipolar stepper motor to a variety of projects. A free configuration utility (for Windows, Linux, and macOS) simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB.

  • Brand: Pololu
  • ASIN: B074MDLY1J
  • UPC: 721361866196
Bipolar Stepper Motor Controller - Stepper Motor Driver TB6600 4A 9-42V CNC Controller,3 PCS Nema 17 Stepper Motor Driver Single Axes Hybrid Stepper Motor (TB6600 Stepper Motor Driver)
Stepper Motor Driver TB6600 4A 9-42V CNC Controller,3 PCS Nema 17 Stepper Motor Driver Single Axes Hybrid Stepper Motor (TB6600 Stepper Motor

Bipolar Stepper Motor Controller

Feature:PWM chopper type bipolar stepper motor driver IC1. 9V-42V DC power supply 2. H bridge bipolar constant phase flow drive 3. the maximum 4.0A of the eight kinds of output current 4. the largest 32 subdivision of the 6 models are optional 5. input signal high speed photoelectric isolation 6. common-anodestandard single pulse interface 7. offline to maintain the function 8. semi closed enclosure can be adapted to a more stringent environment 9. to provide energy-saving semi-automatic current lock function 10. built-in temperature protection and over current protection. Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode. Only the clock pulse signal can be driven two-phase bipolar stepper motor to achieve low vibration, high efficiency work. IC parameter: single chip bipolar sine microstep stepper motor driver the new BiCD 0.13 nm process up to 42V resistance (a +) = 0.4 the forward and reverse rotation control 5 subdivision mode options (1/1, 1/2, 1/4, 1/8, 1/16,1/32) output current: IOUT = 4.0A (peak, in 100ms) rated output: IOUT = 3.5 A package: HZIP25 - 1.00F input port internal pull-down resistor: 100 K alarm output pin current:Ialert = 1mA monitoring output pin (MO): Imo= 1mA with reset and enable pin wit...

  • Color: BLACK
  • Brand: crafts man
  • ASIN: B07FLN24JP
Bipolar Stepper Motor Controller - TB6600 4A 9-42V Stepper Motor Driver CNC Controller, Stepper Motor Driver Nema tb6600 Single Axes Two Phase Hybrid Stepper Motor for CNC
TB6600 4A 9-42V Stepper Motor Driver CNC Controller, Stepper Motor Driver Nema tb6600 Single Axes Two Phase Hybrid Stepper Motor for

Bipolar Stepper Motor Controller

Product Advantages: The TB1H is a high performance microstepping driver based on the latest original for high-efficiency TB6600HG for IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Feature: PWM chopper type bipolar stepper motor driver IC. 1. 9V-42V DC power supply. 2. H bridge bipolar constant phase flow drive. 3. the maximum 4.0A of the eight kinds of output current. 4. the largest 32 subdivision of the 6 models are optional. 5. input signal high speed photoelectric isolation. 6. common-anodestandard single pulse interface. 7. offline to maintain the function. 8. semi closed enclosure can be adapted to a more stringent environment. 9. to provide energy-saving semi-automatic current lock function. 10. built-in temperature protection and over current protection. IC parameter: single chip bipolar sine microstep stepper motor driver. the new BiCD 0.13 nm process. up to 42V. resistance (a +) = 0.4. the forward and reverse rotation control. 5 subdivision mode options (1/1, 1/2, 1/4, 1/8, 1/16,1/32). output current: IOUT = 4.0A (peak, in 100ms). rated output: IOUT = 3.5 A. package: HZIP25 - 1.00F. input port internal pull-down resistor: 100 K. alarm output pin current:Ialert = 1mA. monitoring output pin (MO): Imo= 1m...

  • Brand: NUOXINUS
  • ASIN: B07B9ZQF5D
  • UPC: 713839364419

Bipolar Stepper Motor Controller U679 Search Results

Looking for more Bipolar Stepper Motor Controller similar ideas? Try to explore these searches: Test Light, Greek Religious Art, and Wow Tcg Starter Decks.

Bipolar Stepper Motor Controller - Popular Video Reviews



365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.