Compare Prices

Currie Rear Ends

Currie Rear Ends - NEW CURRIE REAR END & 11
NEW CURRIE REAR END & 11" DISC BRAKES WITH DRILLED ROTORS & BLACK CALIPERS FOR 55-59 CHEVY TRUCK, 5-LUG AXLES, BEARINGS, BRAKE LINE KIT, HARDLINE KIT, FITS 1955 1956 1957

Currie Rear Ends

Includes:Currie 9-Plus Rear End w/ 31 Spline Axles (Currie #CE-GMC5559X5)31 Spline performance axle packageBuilt to the stock overall width (62") & pinion offset specs62" measured outside-of-axle-flange to outside-of-axle-flange (where the wheel bolts on to where the wheel bolts on)Heavy-duty leaf spring pads are installed in the stock location (41 1/2" center-to-center at 12 degrees)Housing includes all 3rd member studs installedGMC55595Needs 9" Ford 3rd Member (called a Chunk)Axles include:Stock 5 x 5" wheel bolt pattern1/2" Wheel studs installed1/4" Thick heavy-duty bearing retainer platesTapered Timken style wheel bearings pressed onAxle flanges on rear end are Big Bearing Ford (New Style) or "Torino"Wilwood 11" Disc Brake Kit w/ Drilled Rotors & Black Calipers (Wilwood Part #140-11389-D)Req. at least 15" diameter wheelsBrake Kit includes:Drilled & Slotted .810" Thick x 11.00" O.D. Rotors w/ HatsLow-Profile 4 Piston Dynapro Calipers-BlackDrum Parking Brake Assemblies w/ Caliper Mounting BracketsBearing RetainersBP-10 Smart Compound Brake PadsAll Bolts, Washers & Shims req. to install braking system on both rear wheelsParking Brake Cable Kit:Connects to Currie Parking Brake Assemblies, then comes together to join stock cable behind transmission Flex Line Kit:Steel braided brak...

  • Brand: Southwest Speed
  • ASIN: B07SLFG8GQ
  • Part No: CUR-GMC5559X5-K6
Currie Rear Ends - 2
2" DROP SUSPENSION & WILWOOD BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END & AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS & 11" DRILLED ROTORS, SPINDLES, MASTER CYLINDER, BOOSTER,

Currie Rear Ends

*Southwest Speed Chrome Power Brake Booster: 8" dual diaphragm booster with deep chrome finish that gives it that show-car look that is guaranteed to catch the eye of the most discriminating enthusiasts *Wilwood Polished Tandem Chamber Master Cylinder: 1 1/8" Bore Cylinder represents the latest refinements in brake pressure actuation & fluid control. *Adjustable Combination Proportioning Valve: Simplifies mounting, fluid circuit plumbing, brake light wiring, & brake bias adjustments. Maintains full separation between the front and rear fluid circuits. A wiring pigtail with a protective boot is included with the switch. *Stainless Steel Fluid Tubes: Precision bent with preinstalled stainless tube buts for a simple bolt-on installation. *Proportioning Valve Mounting Bracket: Black e-coating will give years of durable, rust-free performance. Includes stainless steel button head bolts. *Southwest Speed Tubular Upper & Lower Control Arms: Include ball joints, shafts, bumpers, & inserts. Upper & lower shafts mount in stock locations. Polyurethane inserts on the lower arms locate the coil springs correctly and helps isolate suspension noise.

  • Color: Red Calipers & Drilled Rotors
  • Brand: Southwest Speed
  • ASIN: B00VEOVNT8
  • Part No: CUR-GMB5557X-K24
Currie Rear Ends - NEW CURRIE REAR END & 11
NEW CURRIE REAR END & 11" DISC BRAKES FOR 55-59 CHEVY TRUCK, 6-LUG AXLES, BEARINGS, BRAKE LINE KIT, HARDLINE KIT, FITS 1955 1956 1957 1958 1959

Currie Rear Ends

Includes:Currie 9-Plus Rear End w/ 31 Spline Axles (Currie #CE-GMC5559X6)31 Spline performance axle packageBuilt to the stock overall width (62") & pinion offset specs62" measured outside-of-axle-flange to outside-of-axle-flange (where the wheel bolts on to where the wheel bolts on)Heavy-duty leaf spring pads installed in stock location (41 1/2" center-to-center at 12 degrees) for easy bolt in installHousing includes all 3rd member studs installedGMC55596Needs 9" Ford 3rd Member (called a Chunk)Axles include:6 x 5 1/2" wheel bolt patternWheel studs installed1/4" Thick heavy-duty bearing retainer platesTapered Timken style wheel bearings pressed onAxle flanges on rear end are Big Bearing Ford (New Style) or "Torino"Currie 11" Disc Brake Kit (Currie Part #CE-6012E5)Requires at least 15" diameter wheelsBrake Kit includes:0.50" Thick x 11.00" O.D. Solid Rotors w/ HatsSingle Piston Brake Calipers w/ PadsBacking Plate/Caliper Mounting Bracket Plates w/Drum-Style Parking Brake Assemblies installedNecessary bolts, nuts & registers to install braking system on both rear wheelsParking Brake Cable Kit:Connects to Currie Parking Brake Assemblies, then comes together to join stock cable behind transmission Flex Line Kit:Steel braided brake lines, banjo fittings/bolts & chassis fittings to con...

  • Brand: Southwest Speed
  • ASIN: B07SN669NF
  • Part No: CUR-GMC5559X6-K2
Currie Rear Ends - NEW CURRIE DROPPED REAR END & 10
NEW CURRIE DROPPED REAR END & 10" DRUM BRAKES FOR 55-59 CHEVY TRUCK, 6-LUG AXLES, BEARINGS, BRAKE LINE KIT, HARDLINE KIT, FITS 1955 1956 1957 1958 1959

Currie Rear Ends

Includes:9-Plus Currie 9" Ford Heavy-Duty Rear End housing w/ 31 Spline Axles (Currie #CE-GMC5559X8)31 Spline performance axle package Built to the stock overall width (62") & pinion offset specs62" measured outside-of-axle-flange to outside-of-axle-flange (where the wheel bolts on to where the wheel bolts on)Heavy-duty leaf spring pads installed on bottom of housing to give 9" drop (41 1/2" center-to-center at 12 degrees)Housing includes all 3rd member studs installedGMC55598Needs 9" Ford 3rd Member (called a Chunk)Axles include:6 x 5 1/2" wheel bolt patternWheel studs installed1/4" Thick heavy-duty bearing retainer platesTapered Timken style wheel bearings pressed onAxle flanges on rear end are Big Bearing Ford (New Style) or "Torino"Currie 11" Disc Brake Kit (Currie Part #CE-6012E5)Requires at least 15" diameter wheelsBrake Kit includes:0.50" Thick x 11.00" O.D. Solid Rotors w/ HatsSingle Piston Brake Calipers w/ PadsBacking Plate/Caliper Mounting Bracket Plates w/Drum-Style Parking Brake Assemblies installed Necessary bolts, nuts & registers to install braking system on both rear wheelsParking Brake Cable Kit:Connects to Currie Parking Brake Assemblies, then comes together to join stock cable behind transmissionFlex Line Kit:Steel braided brake lines, banjo fittings/bolts & c...

  • Brand: Southwest Speed
  • ASIN: B07SP8GVT8
  • Part No: CUR-GMC5559X8-K2
Currie Rear Ends - NEW SUSPENSION & WILWOOD BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END & AXLES, 9
NEW SUSPENSION & WILWOOD BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END & AXLES, 9" FORD POSI-TRAC 3RD MEMBER, WILWOOD DISC BRAKES, RED CALIPERS, 11" DRILLED ROTORS, MASTER CYLINDER, BOOSTER

Currie Rear Ends

*Southwest Speed Chrome Power Brake Booster: 8" dual diaphragm booster with deep chrome finish that gives it that show-car look that is guaranteed to catch the eye of the most discriminating enthusiasts *Wilwood Polished Tandem Chamber Master Cylinder: 1 1/8" Bore Cylinder represents the latest refinements in brake pressure actuation & fluid control. *Adjustable Combination Proportioning Valve: Simplifies mounting, fluid circuit plumbing, brake light wiring, & brake bias adjustments. Maintains full separation between the front and rear fluid circuits. A wiring pigtail with a protective boot is included with the switch. *Stainless Steel Fluid Tubes: Precision bent with preinstalled stainless tube buts for a simple bolt-on installation. *Proportioning Valve Mounting Bracket: Black e-coating will give years of durable, rust-free performance. Includes stainless steel button head bolts. *Southwest Speed Tubular Upper & Lower Control Arms: Include ball joints, shafts, bumpers, & inserts. Upper & lower shafts mount in stock locations. Polyurethane inserts on the lower arms locate the coil springs correctly and helps isolate suspension noise.

  • Color: Red Calipers & Drilled Rotors
  • Brand: Southwest Speed
  • ASIN: B00VEOVM3A
  • Part No: CUR-GMB5557X-K34
Currie Rear Ends - Southwest Speed Rear Kit WITH CURRIE REAR END,WILWOOD DISC BRAKES,11
Southwest Speed Rear Kit WITH CURRIE REAR END,WILWOOD DISC BRAKES,11" DRILLED ROTORS,BLACK CALIPERS,BRAKE LINES,PARKING BRAKE CABLES,AXLES,& BEARINGS,FOR 1978-1987 GM G-BODY EL

Currie Rear Ends

Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (#CE-GMG7887X) 9-Plus notchback heavy duty housing 31 Spline performance axle package All stock suspension brackets are installed in the stock location for an easy bolt in installing, and urethane upper control arm bushings are installed in the upper control arm housing brackets. Housing includes all 3rd member studs installed Axles include Stock 5 x 4 3/4" wheel bolt pattern 12mm Wheel studs installed 1/4" Thick heavy-duty bearing retainer plates Tapered Timken style wheel bearings pressed on Wilwood 11" Disc Brake Kit with Drilled Rotors and Black Calipers (#140-11389-D) Brake Kit includes Drilled & Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 5 x 4 1/2", 5 x 4 3/4", and 5 x 5" bolt patterns Low-Profile 4 Piston Dynapro Calipers - Black Drum Parking Brake Assemblies with Caliper Mounting Brackets Bearing Retainers BP-10 Smart Compound Brake Pads All Bolts, Washers, and Shims necessary to install the complete braking system on both rear wheels Parking Brake Cable Kit Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission Flexline Kit Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard ...

  • Color: 8. With Wilwood Drilled Discs, Black Calipers
  • Brand: Southwest Speed
  • ASIN: B00N2FRYPO
  • Part No: GMG7887X-K6
Currie Rear Ends - Currie Enterprises CE-9900TJR TJ/LJ Bolt-On Rear ANTIROCK Sway Bar Kit
Currie Enterprises CE-9900TJR TJ/LJ Bolt-On Rear ANTIROCK Sway Bar

Currie Rear Ends

This is the complete Jeep TJ/LJ bolt on rear Antirock sway bar kit. Kit is completely bolt on and includes all necessary hardware with the exception of the housing tabs which require welding to affix them to the housing. Kit includes the 45" sway bar, semi-gloss black powder coated bolt on frame brackets, sway bar bushings, adjustable heim jointed sway bar links, weld on housing tabs, and all necessary hardware. Detailed instructions included. Requires the minor welding of the housing tabs, and trimming of the rear inner wheel wells for sway bar arm travel.

  • Brand: Currie
  • ASIN: B003FXX52O
  • UPC: 817783003063
  • Part No: CE-9900TJR
Currie Rear Ends - Southwest Speed Rear Kit WITH CURRIE REAR END,11
Southwest Speed Rear Kit WITH CURRIE REAR END,11" DRUM BRAKES,BRAKE LINES,PARKING BRAKE CABLES,AXLES, BEARINGS, FOR 1968,1969,1970,1971,1972 GM A-BODY CHEVELLE,EL

Currie Rear Ends

Includes: Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie #CE-GMA6872X) 9-Plus notchback heavy duty housing 31 Spline performance axle package Built to the stock overall width (61 1/4") and pinion offset specs. 61 1/4" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on. All stock suspension brackets are installed in the stock location for an easy bolt in installation, and urethane upper control arm bushings are installed in the upper control arm housing brackets. Housing includes all 3rd member studs installed Axles include Stock 5 x 4 3/4" wheel bolt pattern Wheel studs installed 1/4" Thick heavy-duty bearing retainer plates Tapered Timken style wheel bearings pressed on Currie 11" Hydraulic Drum Brake Kit (Currie Part #CE-6005AD) Currie brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. Brake Kit includes 11" Hydraulic Drums Both 5 x 4 1/2" and 5 x 4 3/4" Bolt Patterns 2 1/4" x 11" 2.80" Center Register Hole Includes Cable Operated Parking Brake Mechanisms Parking Brake Cable Kit Connects to the Currie Parking Brake Assemblies, then com...

  • Color: 3. With 11" Drums
  • Brand: Southwest Speed
  • ASIN: B00N2FU6D6
  • Part No: GMA6872X-K1
Currie Rear Ends - 2
2" DROP SUSPENSION & WILWOOD BRAKE SET FOR 59-64 IMPALA, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, BLACK CALIPERS, 11" DRILLED ROTORS, SPINDLES, MASTER CYLINDER, BOOSTER, BEL AIR

Currie Rear Ends

*Southwest Speed Chrome Power Brake Booster: 8" dual diaphragm booster with deep chrome finish that gives it that show-car look that is guaranteed to catch the eye of the most discriminating enthusiasts *Wilwood Polished Tandem Chamber Master Cylinder: 1 1/8" Bore Cylinder represents the latest refinements in brake pressure actuation & fluid control. *Adjustable Combination Proportioning Valve: Simplifies mounting, fluid circuit plumbing, brake light wiring, & brake bias adjustments. Maintains full separation between the front and rear fluid circuits. A wiring pigtail with a protective boot is included with the switch. *Stainless Steel Fluid Tubes: Precision bent with preinstalled stainless tube buts for a simple bolt-on installation. *Proportioning Valve Mounting Bracket: Black e-coating will give years of durable, rust-free performance. Includes stainless steel button head bolts. *Southwest Speed Tubular Upper & Lower Control Arms: Include ball joints, shafts, bumpers, & inserts. Upper & lower shafts mount in stock locations. Polyurethane inserts on the lower arms locate the coil springs correctly and helps isolate suspension noise.

  • Color: Black Calipers & Drilled Rotors
  • Brand: Southwest Speed
  • ASIN: B00WFFS6YU
  • Part No: CUR-GMB5964X-K23
Currie Rear Ends - CURRIE REAR END WITH BIG FORD TORINO FLANGES WITH AXLES AND BEARINGS,FITS 1982-1992 GM F-BODY CHEVY CAMARO PONTIAC FIREBIRD,1982,1983,1984,1985,1986,1987, 1988,1989,1990,1991,1992,CE-GMF8292X
CURRIE REAR END WITH BIG FORD TORINO FLANGES WITH AXLES AND BEARINGS,FITS 1982-1992 GM F-BODY CHEVY CAMARO PONTIAC FIREBIRD,1982,1983,1984,1985,1986,1987,

Currie Rear Ends

Features: F9 Fabricated heavy duty housing 31 Spline performance axle package Built to the stock overall width (61 7/8") and pinion offset specs ** 61 7/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on All stock suspension brackets are installed in the stock location for an easy bolt in installation including a heavy duty torque arm bracket that is removable so that 3rd member may be removed for service. Housing includes all 3rd member studs installed These are 9" Ford center sections, so they do require a 9" Ford 3rd Member (sometimes referred to as a Chunk); if you don't currently have one, we do offer them in several ratios. Axles include: Stock 5 x 4 3/4" wheel bolt pattern Wheel studs installed 1/4" Thick heavy-duty bearing retainer plates Tapered Timken style wheel bearings pressed on The Axle flanges on this rear end are the Big Bearing Ford (New Style), also known as "Torino".

  • Color: 1. Rear End Set Only
  • Brand: Southwest Speed
  • ASIN: B00NBC76VU
  • Part No: CUR-CE-GMF8292X

Currie Rear Ends X216 Search Results

Looking for more Currie Rear Ends similar ideas? Try to explore these searches: Pop Star Skirt, 2014 Mustang Hood Pin, and Monos Stock.

Currie Rear Ends - Popular Video Reviews

Currie F9 Complete 9" Rearend Build

Currie Rear Ends

This video illustrates every step in the process, through every department of our facility, of the fabrication of a Currie F9 fabricated 9" rearend. From raw materials to sitting on a pallet completed.

  • Likes: 194
  • View count: 80854
  • Dislikes: 14
  • Comments: 21
Tags: Currie,Enterprises,Bronco,F9,fabricated,rearend,rear,end

Currie F9 9inch for Drag and Street

Currie Rear Ends

We took a trip over to Currie Enterprises to check out how their bulletproof 9in housing is constructed and eventually installed on Project Grandma. - SUBSCRIBE to the POWERTV YOUTUBE Channel -- http://www.youtube.com/subscription_center?add_user=powertv ***** Visit Power Automedia's Online Maga...

  • Likes: 78
  • View count: 20405
  • Dislikes: 3
  • Comments: 2
Tags: powerTV,Currie Enterprises,Currie,Enterprises,Bullet proof 9in Housing,Bullet,Bullet proof,proof,...

Installation of Currie Early Mustang Replica Housing

Currie Rear Ends

Step by step video illustrates a complete installation of a Currie early Mustang replica 9" rearend housing into a '66 Mustang coupe! Follow along to see just how easy this install really is!

  • Likes: 58
  • View count: 11614
  • Dislikes: 2
  • Comments: 0
Tags: Ford,Mustang,Shelby,9 Ford,9 Rearend,install,instruction,how-to,how to,educational,John Currie,Cu...


365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.