Compare Prices

Dana 60 Caliper Bracket

Dana 60 Caliper Bracket - Strange Engineering B1704B CALIPER BRACKET DANA 60
Strange Engineering B1704B CALIPER BRACKET DANA

Dana 60 Caliper Bracket

CALIPER BRACKET DANA 60

    • Brand: Strange Engineering
    • ASIN: B07QMG3C5N
    • UPC: 099998565875
    • Part No: B1704B
    Dana 60 Caliper Bracket - Dana 60 Weld-On Brake Caliper Brackets
    Dana 60 Weld-On Brake Caliper

    Dana 60 Caliper Bracket

    Dana 60 Weld-On Brake Caliper Brackets Get The Stopping Power You Need Weld-on caliper mounts for the Dana 60 axles with 3.125" axle tubes - Made from 3/8" Steel in a strong yet light weight design. Drilled and taped to 7/16". For use with 73-87 Chevy 3/4" ton K-20 front calipers and rotors. Includes 2 pieces. What's Included Two (2) Weld-On Brake Caliper Brackets Additional Parts Brake Rotor and Hub Assembly (2) 73-87 Chevy ¾ ton K20 - Napa Part Number NB 4886287 Brake Caliper (2) 73-87 Chevy ¾ ton K20 - Napa Part Number left-CAL N4674 right-CAL N4677 Brake pads 73-87 Chevy ¾ ton K20 - Napa Part Number SS728AM Rubber Brake Line (2) 73-87 Chevy ¾ ton K20 - Napa Part Number UP36958 Brake Caliper Housing Bolt 73-87 Chevy ¾ ton K20 - Napa Part Number UP82205W

      • Brand: Ballistic Fabrication
      • ASIN: B071NG25MP
      • UPC: 887753253606
      • Part No: BRK-1015
      Dana 60 Caliper Bracket - RuffStuff Specialties R2114 1972-1976 Dana 60 Single Rear Wheel Disc Brake Conversion
      RuffStuff Specialties R2114 1972-1976 Dana 60 Single Rear Wheel Disc Brake

      Dana 60 Caliper Bracket

      Bolt On Caliper Brackets Only Fits Early Ford (1972-1976) Dana 60 Full Float Single Wheel Rear Axles. Used to convert drum to disc brakes.This kit will only fit single rear wheels. Complete Kit Includes: 1 Pair Disc Brake Brackets with Grade 8 Bolts 2 Weld on Brake Line Tabs 2 Brake Line Clips 2 New Brake Calipers 2 Hydraulic Hoses with 10mm Banjo Bolt Fittings 4 New Brake Pads 2 New Rotors *NOTE* Rotor installs onto the backside of the hub! For this reason, you will need to use dual rear wheel studs, which are NOT included.

      • Single Rear Wheel Offset For Calipers, Does Not Fit For Use With Dual Rear Wheels
      • 3/8 Inch Thick Plate With Pre-Drilled Holes For Easy Bolt-On
      • Proportioning Valve Recommended to Fine Tune Front/Rear Stopping Bias
      • DOES NOT INCLUDE PROVISIONS FOR E-BRAKE/PARKING BRAKE, AND THERE MAY OTHER COMPONENTS REQUIRED FOR COMPLETION
      • Designed Using 1975 Chevy 3/4 Ton Front Rotors and Calipers
      • Brand: Ruffstuff Specialties
      • ASIN: B01N6JUD9F
      • Part No: R2114
      Dana 60 Caliper Bracket - NEW WILWOOD DRAG RACING REAR DISC BRAKE KIT, 11.44
      NEW WILWOOD DRAG RACING REAR DISC BRAKE KIT, 11.44" DRILLED ROTORS, BLACK 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH GM 10/12 BOLT AXLE FLANGES & 2.75" OFFSET, CHEVY BUICK

      Dana 60 Caliper Bracket

      Brand New Wilwood Drag Racing Rear Forged Dynalite, Bolt-On 11.44" Disc Brake Kit (Part # 140-0263-BD) for Both Rear Wheels. Only one side pictured. See the list, the diagram, and the assembly booklet for a detail of the parts included. Features Drilled Rotors and Black Dynalite Calipers. Fits: 10 Bolt and 12 Bolt GM Rear Ends with a 2.81" Axle Flange Offset (see diagrams shown) with C-Clips Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications. FDL Rear drag kits are true bolt-on kits for popular muscle car rear axles and aftermarket rears built with custom axle ends. Drag kits are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the 4-piston forged Dynalite caliper over 3/8" plate steel rotors that are mounted to the axle with an aluminum hat. *** These kits require at least 15" diameter wheels. *** Brake kit includes parts for both rear wheels: Drilled, .350" Thick x 11.44" O.D. Rotors Forged Dynalite Calipers - Black Caliper Mounting Brackets BP-10 Smart Compound Brake Pads Brake Hat...

      • Brand New Wilwood Drag Racing Rear Forged Dynalite, Bolt-On 11.44" Disc Brake Kit (Part # 140-0263-BD) for Both Rear Wheels > Only one side pictured > See the list, the diagram, and the assembly booklet for a detail of the parts included > Features Drilled Rotors and Black Dynalite Calipers
      • Fits: > 10 Bolt and 12 Bolt GM Rear Ends with a 2.81" Axle Flange Offset (see diagrams shown) with C-Clips
      • Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications > FDL Rear drag kits are true bolt-on kits for popular muscle car rear axles and aftermarket rears built with custom axle ends
      • Drag kits are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes > Based on the specific style of housing end and axle offset, mounting kits securely install the 4-piston forged Dynalite caliper over 3/8" plate steel rotors that are mounted to the axle with an aluminum hat > *** These kits require at least 15" diameter wheels ***
      • Brake kit includes parts for both rear wheels: > Drilled, .350" Thick x 11.44" O.D. Rotors > Forged Dynalite Calipers - Black > Caliper Mounting Brackets > BP-10 Smart Compound Brake Pads > Brake Hats > All Hardware necessary to install the complete braking system on both rear wheels > Complete brake kit weighs approximately 27 lbs
      • Color: Black Calipers, Drilled Rotors
      • Brand: Southwest Speed
      • ASIN: B01FT45CUY
      • Part No: 140-0263-BD
      Dana 60 Caliper Bracket - NEW WILWOOD REAR DISC BRAKE KIT, 12
      NEW WILWOOD REAR DISC BRAKE KIT, 12" ROTORS, PARKING BRAKE ASSEMBLIES, BLACK 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH MOPAR 8 3/4" / DANA 60 AXLE FLANGES & 2.50"

      Dana 60 Caliper Bracket

      Brand New Wilwood Rear Parking Brake, Pro Series Forged Dynalite, Bolt-On 12.19" Disc Brake Kit (Part # 140-10767-B) for Both Rear Wheels. Only one side pictured. See the list, the diagram, and the assembly booklet for a detail of the parts included. Features Black Calipers. Fits: Mopar 8 3/4" and Dana 60 Rear Ends with a 5 Bolt Mounting Pattern on the Axle Flange and with a 2.50" Flange Offset (see diagrams shown in the images) This kit is for use with Non-Adjustable Green Bearings (MO-400) with snap ring Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications. These FDL Pro Series rear disc kits provide a complete solution for popular muscle car rear axles that require a parking brake. Forged Billet Dynalite 4-Piston calipers, 12.19" o.d. one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. *** These Big Brake kits require at least 16" diameter wheels. *** Brake kit includes parts for both rear wheels: .810" Thick x...

      • Brand New Wilwood Rear Parking Brake, Pro Series Forged Dynalite, Bolt-On 12.19" Disc Brake Kit (Part # 140-10767-B) for Both Rear Wheels | * Only one side pictured | * See the list, the diagram, and the assembly booklet for a detail of the parts included | * Features Black Calipers
      • Fits: | * Mopar 8 3/4" and Dana 60 Rear Ends with a 5 Bolt Mounting Pattern on the Axle Flange and with a 2.50" Flange Offset (see diagrams shown in the images) | * This kit is for use with Non-Adjustable Green Bearings (MO-400) with snap ring
      • Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications | * These FDL Pro Series rear disc kits provide a complete solution for popular muscle car rear axles that require a parking brake
      • Forged Billet Dynalite 4-Piston calipers, 12.19" o.d. one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines | * The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking | *** These Big Brake kits require at least 16" diameter wheels ***
      • Brake kit includes parts for both rear wheels: * | > .810" Thick x 12.19" O.D. Rotors > Forged Dynalite Calipers - Black > Caliper Mounting Brackets > Drum Parking Brake Assemblies > Bearing Retainers > BP-10 Smart Compound Brake Pads > Brake Hats > All Hardware necessary to install the complete braking system on both rear wheels > Complete kit weighs approximately 50 lbs
      • Color: Black Calipers
      • Brand: Southwest Speed
      • ASIN: B01C7L3DX0
      • Part No: 140-10767-B
      Dana 60 Caliper Bracket - NEW WILWOOD DRAG RACING REAR DISC BRAKE KIT, 11.44
      NEW WILWOOD DRAG RACING REAR DISC BRAKE KIT, 11.44" DRILLED ROTORS, RED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH MOPAR 8 3/4" / DANA 60 AXLE FLANGES, 2.50", &

      Dana 60 Caliper Bracket

      Brand New Wilwood Drag Racing Rear Forged Dynalite, Bolt-On 11.44" Disc Brake Kit (Part # 140-8853-DR) for Both Rear Wheels. Only one side pictured. See the list, the diagram, and the assembly booklet for a detail of the parts included. Features Drilled Rotors and Red Dynalite Calipers. Fits: Mopar 8 3/4" and Dana 60 Rear Ends with a 5 Bolt Mounting Pattern on the Axle Flange and with a 2.50" Flange Offset (see diagrams shown) This kit requires the use of snap ring style Green Bearings (MO400) Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications. FDL Rear drag kits are true bolt-on kits for popular muscle car rear axles and aftermarket rears built with custom axle ends. Drag kits are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the 4-piston forged Dynalite caliper over 3/8" plate steel rotors that are mounted to the axle with an aluminum hat. *** These kits require at least 15" diameter wheels. *** Brake kit includes parts for both rear wheels: Drilled, .350" Thick x 11.44" O.D. Roto...

      • Brand New Wilwood Drag Racing Rear Forged Dynalite, Bolt-On 11.44" Disc Brake Kit (Part # 140-8853-DR) for Both Rear Wheels > Only one side pictured > See the list, the diagram, and the assembly booklet for a detail of the parts included > Features Drilled Rotors and Red Dynalite Calipers
      • Fits: > Mopar 8 3/4" and Dana 60 Rear Ends with a 5 Bolt Mounting Pattern on the Axle Flange and with a 2.50" Flange Offset (see diagrams shown) > This kit requires the use of snap ring style Green Bearings (MO400)
      • Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications > FDL Rear drag kits are true bolt-on kits for popular muscle car rear axles and aftermarket rears built with custom axle ends
      • Drag kits are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes > Based on the specific style of housing end and axle offset, mounting kits securely install the 4-piston forged Dynalite caliper over 3/8" plate steel rotors that are mounted to the axle with an aluminum hat > *** These kits require at least 15" diameter wheels ***
      • Brake kit includes parts for both rear wheels: > Drilled, .350" Thick x 11.44" O.D. Rotors > Forged Dynalite Calipers - Red > Caliper Mounting Brackets > BP-10 Smart Compound Brake Pads > Brake Hats > All Hardware necessary to install the complete braking system on both rear wheels > Complete kit weighs approximately 26 lbs
      • Color: Red Calipers, Drilled Rotors
      • Brand: Southwest Speed
      • ASIN: B01FT3APRK
      • Part No: 140-8853-DR
      Dana 60 Caliper Bracket - NEW WILWOOD DRAG RACING REAR DISC BRAKE KIT, 11.44
      NEW WILWOOD DRAG RACING REAR DISC BRAKE KIT, 11.44" DRILLED ROTORS, RED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH MOPAR 8 3/4" / DANA 60 AXLE FLANGES, 2.36", &

      Dana 60 Caliper Bracket

      Brand New Wilwood Drag Racing Rear Forged Dynalite, Bolt-On 11.44" Disc Brake Kit (Part # 140-5255-DR) for Both Rear Wheels. Only one side pictured. See the list, the diagram, and the assembly booklet for a detail of the parts included. Features Drilled Rotors and Red Dynalite Calipers. Fits: Mopar 8 3/4" and Dana 60 Rear Ends with a 5 Bolt Mounting Pattern on the Axle Flange and with a 2.36" Flange Offset (see diagrams shown) This kit requires the use of snap ring style Green Bearings (MO400) Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications. FDL Rear drag kits are true bolt-on kits for popular muscle car rear axles and aftermarket rears built with custom axle ends. Drag kits are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the 4-piston forged Dynalite caliper over 3/8" plate steel rotors that are mounted to the axle with an aluminum hat. *** These kits require at least 15" diameter wheels. *** Brake kit includes parts for both rear wheels: Drilled, .350" Thick x 11.44" O.D. Rotor...

      • Brand New Wilwood Drag Racing Rear Forged Dynalite, Bolt-On 11.44" Disc Brake Kit (Part # 140-5255-DR) for Both Rear Wheels > Only one side pictured > See the list, the diagram, and the assembly booklet for a detail of the parts included > Features Drilled Rotors and Red Dynalite Calipers
      • Fits: > Mopar 8 3/4" and Dana 60 Rear Ends with a 5 Bolt Mounting Pattern on the Axle Flange and with a 2.36" Flange Offset (see diagrams shown) > This kit requires the use of snap ring style Green Bearings (MO400)
      • Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications > FDL Rear drag kits are true bolt-on kits for popular muscle car rear axles and aftermarket rears built with custom axle ends
      • Drag kits are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes > Based on the specific style of housing end and axle offset, mounting kits securely install the 4-piston forged Dynalite caliper over 3/8" plate steel rotors that are mounted to the axle with an aluminum hat > *** These kits require at least 15" diameter wheels ***
      • Brake kit includes parts for both rear wheels: > Drilled, .350" Thick x 11.44" O.D. Rotors > Forged Dynalite Calipers - Red > Caliper Mounting Brackets > BP-10 Smart Compound Brake Pads > Brake Hats > All Hardware necessary to install the complete braking system on both rear wheels > Complete kit weighs approximately 27 lbs
      • Color: Red Calipers, Drilled Rotors
      • Brand: Southwest Speed
      • ASIN: B01FT2G2HS
      • Part No: 140-5255-DR
      Dana 60 Caliper Bracket - NEW WILWOOD DRAG RACING REAR DISC BRAKE KIT, 11.44
      NEW WILWOOD DRAG RACING REAR DISC BRAKE KIT, 11.44" ROTORS, RED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH MOPAR 8 3/4" / DANA 60 AXLE FLANGES, 2.36" OFFSET, &

      Dana 60 Caliper Bracket

      Brand New Wilwood Drag Racing Rear Forged Dynalite, Bolt-On 11.44" Disc Brake Kit (Part # 140-0260-R) for Both Rear Wheels. Only one side pictured. See the list, the diagram, and the assembly booklet for a detail of the parts included. Features Powder-Coated Red Calipers. Fits: Mopar 8 3/4" and Dana 60 Rear Ends with a 5 Bolt Mounting Pattern on the Axle Flange and with a 2.36" Flange Offset (see diagrams shown) This kit requires the use of Mopar Performance Green Bearings (RP-400) Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications. FDL Rear drag kits are true bolt-on kits for popular muscle car rear axles and aftermarket rears built with custom axle ends. Drag kits are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the 4-piston forged Dynalite caliper over 3/8" plate steel rotors that are mounted to the axle with an aluminum hat. *** These kits require at least 15" diameter wheels. *** Brake kit includes parts for both rear wheels: .350" Thick x 11.44" O.D. Rotors Forged Dynalite Ca...

      • Brand New Wilwood Drag Racing Rear Forged Dynalite, Bolt-On 11.44" Disc Brake Kit (Part # 140-0260-R) for Both Rear Wheels Only one side pictured > See the list, the diagram, and the assembly booklet for a detail of the parts included > Features Powder-Coated Red Calipers
      • Fits: > Mopar 8 3/4" and Dana 60 Rear Ends with a 5 Bolt Mounting Pattern on the Axle Flange and with a 2.36" Flange Offset (see diagrams shown) > This kit requires the use of Mopar Performance Green Bearings (RP-400)
      • Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications > FDL Rear drag kits are true bolt-on kits for popular muscle car rear axles and aftermarket rears built with custom axle ends
      • Drag kits are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes > Based on the specific style of housing end and axle offset, mounting kits securely install the 4-piston forged Dynalite caliper over 3/8" plate steel rotors that are mounted to the axle with an aluminum hat > *** These kits require at least 15" diameter wheels ***
      • Brake kit includes parts for both rear wheels: > .350" Thick x 11.44" O.D. Rotors > Forged Dynalite Calipers - Red > Caliper Mounting Brackets > BP-10 Smart Compound Brake Pads > Brake Hats > All Hardware necessary to install the complete braking system on both rear wheels > Complete kit weighs approximately 27 lbs
      • Color: Red Calipers
      • Brand: Southwest Speed
      • ASIN: B01FSYOEOA
      • Part No: 140-0260-R
      Dana 60 Caliper Bracket - RuffStuff Specialties Late (1977-1983) F Dana 60 Rear SWR Axle Disc Brake Brackets (Pair)
      RuffStuff Specialties Late (1977-1983) F Dana 60 Rear SWR Axle Disc Brake Brackets

      Dana 60 Caliper Bracket

      Bolt On Caliper Brackets Fit Late (1977-1983) Ford Dana 60 Full Float Rear Axle Tube. Designed to Use Single Rear Wheels Only.

      • To Be Used as Single Rear Wheel
      • 3/8 Inch Thick Plate With Pre-Drilled Holes For Easy Bolt-On
      • Can Be Welded To Axle Tube If Desired
      • Designed to Use With 1975 Chevy Front Calipers and Rotors for Conversion
      • Brand: Ruffstuff Specialties
      • ASIN: B01NAM6I1B
      • Part No: R1336
      Dana 60 Caliper Bracket - Cardone Service Plus 14-1098 Remanufactured Caliper Bracket
      Cardone Service Plus 14-1098 Remanufactured Caliper

      Dana 60 Caliper Bracket

      At Cardone, quality is the foundation of our corporate culture and the focus of each and every part we sell. We remanufacture all Caliper Brackets to the highest standards to meet or exceed OEM performance. All bolt threads have been thoroughly inspected and tested to ensure trouble-free installation. Feel confident each and every time you apply your brakes, knowing you have Cardone high quality products installed.

      • Meets or exceeds OE performance and original OE design flaws are corrected
      • Application-specific brackets ensure proper fit and function
      • Brackets are coated with rust protection to extend product life
      • Grease pack is included for easy installation
      • Industry-leading bracket coverage offers the most complete list of applications to choose from
      • Brand: A1 Cardone
      • ASIN: B00W3QZY1O
      • UPC: 884548110632
      • Part No: 14-1098

      Dana 60 Caliper Bracket S755 Search Results

      Looking for more Dana 60 Caliper Bracket similar ideas? Try to explore these searches: Vineyards 2012 Cabernet Sauvignon, 2015 Nlcs Cardinals Game, and Multi Sport Cage Net.

      Dana 60 Caliper Bracket - Popular Video Reviews

      Dana 60 Axle: Hub and Brake Disc Removal How-To

      Dana 60 Caliper Bracket

      Video of what the inside of a Dana 60 hub looks like and how to get it off. READ THIS FOR MORE IMPORTANT INFORMATION: - I am not a professional mechanic. Use these instructions at your own risk. Always wear your safety gear and follow safe work shop practices. - If you are replacing the hub bea...

      • Likes: 268
      • View count: 100079
      • Dislikes: 16
      • Comments: 54
      Tags: dana,60,d60,corp,front,60f,axle,hub,hubs,brake,brakes,remove,how,to,how-to,how to,instructions,in...

      Weld on disc brake bracket

      Dana 60 Caliper Bracket

      The caliper is the '75 Chevy 3/4 ton(12.5" rotor diameter), it is very easy to find and it is cheap to buy. The rotor will depend on your application, since these calipers are floaters they will go on just about any vented rotor. This is the cleanest way to build an axle, cut off that old drum fl...

      • Likes: 43
      • View count: 29514
      • Dislikes: 2
      • Comments: 5
      Tags: Ruffstuff,Specialties,4x4,disc,brake,weld,on,caliper,off,road

      GM Kingpin Dana 60 Big Brake Conversion

      Dana 60 Caliper Bracket

      Torq Motorsports GM Kingpin Dana 60 14 Inch Big Brake Conversion. If you own a King Pin GM or Dodge Dana 60 Steering axle and happen to be looking for better brakes this is for you. Our Big Brake Kit allows you to upgrade your Dana 60 to use 2009 and later Dodge 3500 14 Inch Rotors and Calipers...

      • Likes: 18
      • View count: 2722
      • Dislikes: 0
      • Comments: 1
      Tags: big brake kit,dana 60 big brake,Torq axle,torq motorsports,GM Kingpin Dana 60,14 Inch Brakes


      365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.