Compare Prices

Efi Manifold

Efi Manifold - POLARIS RANGER 700 EFI XP THROTTLE INTAKE MANIFOLD RUBBER BOOT ADAPTER 4x4 2008
POLARIS RANGER 700 EFI XP THROTTLE INTAKE MANIFOLD RUBBER BOOT ADAPTER 4x4

Efi Manifold

NEW Intake Manifold Adapter POLARIS RANGER 700 EFI XP 4x4. TOP QUALITY AFTERMARKET REPLACEMENT. Replaces existing damaged intake, Just replace and ride again. Give your machine the new power and torque it really deserves, and have more fun with the power at your finger tips. BRAND NEW. 1x Intake Manifold. 1x Clamp. Intake fits: Polaris Models. 2008 RANGER 700 EFI XP 4x4.

    • Brand: Zoom
    • ASIN: B074BDDJL5
    • Part No: ZZP-HTY105
    Efi Manifold - Professional Products 52060 Polished LS1 EFI Manifold
    Professional Products 52060 Polished LS1 EFI

    Efi Manifold

    Professional Products Polished LS1 EFI Manifold features a polished finish. This manifold is the result of over one year of development and testing and has proven to provide significant increases in power. In direct comparison dyno tests against a factory LS6 intake manifold, the Typhoon produced 17.7 more horsepower at 6,200 RPM. It also makes more power and torque at low and mid-range engine speeds than other aftermarket manifolds. This design features a larger plenum volume, which makes the manifold suitable for larger displacement engines. The manifold has nitrous bosses positioned on the port runners and a 85 millimeter inlet. The manifold kit includes high volume fuel rails with stainless steel mounting brackets, stainless hardware, and a -6 AN stainless braided crossover hose. Additional fittings are also supplied that allows a connection to the stock fuel inlet line.

    • Improved performance
    • Fuel rails included
    • Brand: Professional Products
    • ASIN: B001FTG8QU
    • UPC: 665053520600
    • Part No: 52060
    Efi Manifold - Professional Products 52062 Polished LS2 EFI Manifold
    Professional Products 52062 Polished LS2 EFI

    Efi Manifold

    Professional Products Polished LS2 EFI Manifold features a polished finish. The LS2 Typhoon has all the same features as the LS1/LS6 version and comes with a 96 millimeter inlet opening. The complete manifold kit includes special intake gaskets with silicone sealing beads on both sides of the gasket, high volume fuel rails with stainless mounting brackets and stainless hardware along with a -6 AN stainless braided crossover hose and fittings. The additional fittings are supplied that allow connection to the stock fuel inlet line or own fuel line can be plumbed. The Typhoon manifold for LS2 is designed with a larger volume plenum chamber, which is particularly suited to larger displacement engines but also works great on stock displacement motors. The manifold also features strategically placed nitrous bosses which can be tapped for nitrous nozzles if desired. The manifold has a very large bottom panel that allows easy access for any special porting work.

    • Improved performance
    • Fuel rails included
    • Brand: Professional Products
    • ASIN: B001FTHY4K
    • UPC: 665053520624
    • Part No: 52062
    Efi Manifold - Edelbrock 3881 INTAKE MANIFOLD
    Edelbrock 3881 INTAKE

    Efi Manifold

    The Edelbrock Performer 5. 8 EFI (Electronic Fuel Injection) Intake Manifold can be used with the Edelbrock's twin throttle body 350-3837. This manifold made 34 foot / pounds more torque than stock on our test engine. The intake section includes plenum only and is at the upper part. The modular design incorporates the latest airflow technology and CAD programming for maximum power gains up to 37 horsepower at 5, 500 RPM with no loss of low speed torque. This manifold features a broad power range from idle to 5, 500 RPM. The removable plenum cover allows access to runners for modification; and base manifold is CNC port matched to upper manifold for maximum performance. The upper and plenum cover are powder-coated light titanium gray. The base is as-cast and not powder-coated.

    • Made 34 foot / pounds more torque than stock on our test engine
    • Modular design incorporates the latest airflow technology
    • CAD programming for maximum power gains
    • Includes plenum only and it is at the upper part
    • Powder coated light titanium gray
    • Brand: Edelbrock
    • ASIN: B00062YC60
    • UPC: 085347038817
    • Part No: 3881
    Efi Manifold - A-Team Performance EFI Fabricated Intake Manifold with Fuel Rails & Throttle Body 15° Throttle Opening Short Compatible with GM Chevrolet SBC Small Block Chevy V8 GEN. III/IV (LS-BASED) Black
    A-Team Performance EFI Fabricated Intake Manifold with Fuel Rails & Throttle Body 15° Throttle Opening Short Compatible with GM Chevrolet SBC Small Block Chevy V8 GEN. III/IV (LS-BASED)

    Efi Manifold

    A-Team Performance EFI Fabricated Intake Manifold with Fuel Rails & Throttle Body 15° Throttle Opening Short Compatible with GM Chevrolet SBC Small Block Chevy V8 GEN. III/IV (LS-BASED) BlackFabricated Aluminum Sheet Metal Intake Manifold102MM Throttle BodyFuel Rails & Cross Over4-Bolt LSX Throttle Cable BracketGaskets & Hardware are includedIntake is about 2" taller than stockThrottle Body is Drive by CableOVERVIEWWe designed our fabricated aluminum sheet metal intake manifold to improve the look and performance of your LS engine. It features a 102mm throttle body opening for maximum airflow. The runners are velocity stacked, allowing air to move more smoothly at high velocities.The manifold is constructed of 3.5mm thick T-6061 aluminum and is TIG welded to ensure consistent strength and performance. Individual port o-rings guarantee a good seal with the cylinder heads and throttle body. Available in clear or black anodized finishes, this manifold will also give your engine bay a nice, clean aesthetic. QUALITY CONSTRUCTIONThe first thing people notice when taking a closer at our intake manifold is the beautiful TIG (tungsten inert gas) welding throughout - all done by hand. This ensures solid construction that won't fail under stress. The head flanges are 7/16" thick, and the p...

    • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX Throttle Cable Bracket -Gaskets & Hardware are included.
    • Intake is about 2" taller than stock.
    • Throttle Body is Dive by Cable OVERVIEW We designed our fabricated aluminum sheet metal intake manifold to improve the look and performance of your LS engine.
    • FITMENT CHEVROLET SMALL BLOCK V8 GEN. III/IV (LS-BASED) · 4.8 L / 293 in3 (L20, LY2) · 5.3 L / 325 in3 (LC9, LH6, LH8, LMG, LY5) · 6.0 L / 364 in3 (L76, L96, LFA, LY6) · 6.2 L / 376 in3 (L92, L99, LS3, LSA)
    • Includes: 1 x A-Team Performance EFI Fabricated Intake Manifold with Fuel Rails & Throttle Body 15° Throttle Opening Short Compatible with GM Chevrolet SBC Small Block Chevy V8 GEN. III/IV (LS-BASED) Black
    • Brand: A-Team Performance
    • ASIN: B079YBCQT7
    • Part No: 81003-BK, 81009BK, 81012BK, 81013
    Efi Manifold - A-Team Performance EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body 15° Throttle Opening Short Compatible with GM LS LS1 LS2 LS6 Black
    A-Team Performance EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body 15° Throttle Opening Short Compatible with GM LS LS1 LS2 LS6

    Efi Manifold

    A-Team Performance EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body 15° Throttle Opening Short Compatible with GM LS LS1 LS2 LS6 Black INCLUDES:Fabricated Aluminum Sheet Metal Intake Manifold 102MM Throttle Body Fuel Rails and Cross Over 4-Bolt LSX Throttle Cable BracketGaskets & Hardware are included. Intake is about 2" taller than stock FITMENT: CHEVROLET SMALL BLOCK V8 GEN. III/IV (LS-BASED)4.8 L / 293 in3 (LR4)5.3 L / 325 in3 (L33, L59, LM4, LM7)5.7 L / 346 in3 (LS1, LS6) 6.0 L / 364 in3 (LQ4, LQ9, LS2) NOTE: Fits LS-based engines with "cathedral" intake port shape only. Due to transverse engine configuration, fitment on LS4 would require significant modification. A-Team Performance parts are sold exclusively by Southwest Performance Parts.

    • Includes: Fabricated Aluminum Sheet Metal Intake Manifold 102MM Throttle Body Fuel Rails & Cross Over 4-Bolt LSX Throttle Cable Bracket
    • Intake is about 2" taller than stock. Gaskets and hardware included.
    • FITMENT: CHEVROLET SMALL BLOCK V8 GEN. III/IV (LS-BASED) 4.8 L / 293 in3 (LR4), 5.3 L / 325 in3 (L33, L59, LM4, LM7), 5.7 L / 346 in3 (LS1, LS6), and 6.0 L / 364 in3 (LQ4, LQ9, LS2)
    • NOTE: Fits LS-based engines with "cathedral" intake port shape only. Fitment on LS4 would require significant modification
    • 1 x A-Team Performance EFI Fabricated Black Intake Manifold with Fuel Rails and Throttle Body 15° Throttle Opening Short Compatible with GM LS LS1 LS2 LS6
    • Brand: A-Team Performance
    • ASIN: B06Y2L7Z3P
    • Part No: LS1 INTAKE KIT
    Efi Manifold - Holley 300240 Intake Elbow
    Holley 300240 Intake Elbow

    Efi Manifold

    This cast EFI intake elbow allows the use of GM LS or Ford 5.0L throttle bodies on any intake manifold w/ the 4150 mounting flange. Slotted mounting holes & dual throttle cable mounting bracket bosses allow the elbow & throttle body to be mounted forward, sideways, or rearward. Features (4) vacuum ports, MAP sensor port, machined / port matched to 4150 gasket, and 100° throttle body angle for extra hood clearance.

      • Brand: Holley
      • ASIN: B000764XFU
      • UPC: 090127745854
      • Part No: 300-240
      Efi Manifold - A-Team Performance 102mm Silver Intake Manifold Drive By Wire Throttle Body Sheet Metal Fabricated Black EFI 15° Throttle Opening Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6
      A-Team Performance 102mm Silver Intake Manifold Drive By Wire Throttle Body Sheet Metal Fabricated Black EFI 15° Throttle Opening Compatible with Chevrolet GMC Pontiac LS LS1 LS2

      Efi Manifold

      A-Team Performance 102mm LS LS1 LS2 LS6 Silver Intake Manifold Drive by Wire Throttle Body Sheet Metal Fabricated Black EFI 15° THROTTLE OPENING Compatible with Chevrolet GMC Pontiac.100% TIG Welded Aluminum. Hardware includes 3mm (1/8") thick T6061 Sheet Aluminum construction, Black Fuel Rails, Fuel crossover line: Included -Intake is about 2" taller than stock. This intake fits cathedral style LS1 LS2 LS6 4.8/5.3/5.7/6.0 heads.FEATURES:Silver Intake Manifold, Silver Throttle Body, Gaskets, Hardware, Black Fuel Rails, Fuel Crossover Line.Works on CHEVROLET SMALL BLOCK V8 GEN. III/IV (LS-BASED) 4.8 L / 293 in3 (LR4) 5.3 L / 325 in3 (L33, L59, LM4, LM7) 5.7 L / 346 in3 (LS1, LS6) 6.0 L / 364 in3 (LQ4, LQ9, LS2)A-Team Performance parts are sold exclusively by Southwest Performance Parts.

      • COMPATIBILITY - Fits Cathedral Port LS1/LS2/LS6 heads
      • HARDWARE - 3mm (1/8") thick T6061 Sheet Aluminum construction
      • DRIVE BY WIRE THROTTLE BODY - 102mm bore Throttle Body Openings
      • DURABILITY - The intake will not bend or flex With Boost Or Vacuum
      • FABRICATION - TIG Welded Aluminum
      • Brand: A-Team Performance
      • ASIN: B07F7M6847
      • Part No: 501CA+DBWTB102CA
      Efi Manifold - A-Team Performance Intake Manifold 102mm Throttle Body Sheet Metal Fabricated Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 EFI Black
      A-Team Performance Intake Manifold 102mm Throttle Body Sheet Metal Fabricated Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 EFI

      Efi Manifold

      A-Team Performance Intake Manifold 102mm Throttle Body Sheet Metal Fabricated Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 EFI Black 0° THROTTLE OPENING FAST SHIPPING SPECIFICATIONS:Fabrication - TIG Welded AluminumBlack Throttle Body - IncludedGaskets - IncludedHardware - IncludedBlack Fuel RailS - IncludedFuel Crossover Line - Included Intake is about 3.5" taller than stock FEATURES:Black 3mm Sheet Metal AluminumThe intake will not bend or flex with Boost Or VacuumBlack Fuel Rails with Braided Fuel Line is includedThese will fit cathedral style LS1 LS2 LS6 4.8/5.3/5.7/6.0 heads APPLICATION:This intake will fit Cathedral Port LS1/LS2/LS6 headsCHEVROLET SMALL BLOCK V8 GEN. III/IV (LS-BASED)4.8 L / 293 in3 (LR4)5.3 L / 325 in3 (L33, L59, LM4, LM7)5.7 L / 346 in3 (LS1, LS6)6.0 L / 364 in3 (LQ4, LQ9, LS2)PACKAGE INCLUDES:Black Intake Manifold, Black Throttle Body, Gaskets, Hardware, Black Fuel Rails, and Fuel Crossover Line.A-Team Performance parts are sold exclusively by Southwest Performance Parts.

      • Black 3mm Sheet Metal Aluminum
      • The intake will not bend or flex with Boost Or Vacuum
      • These will fit cathedral style LS1 LS2 LS6 4.8/5.3/5.7/6.0 heads
      • Intake is about 3.5" taller than stock
      • Includes Black Intake Manifold, Black Throttle Body, Gaskets, Hardware, Black Fuel Rails, and Fuel Crossover Line
      • Brand: A-Team Performance
      • ASIN: B07F4HXTD4
      • Part No: 502BK
      Efi Manifold - Professional Products 52065 Satin LS1 EFI Manifold with 96mm Opening
      Professional Products 52065 Satin LS1 EFI Manifold with 96mm

      Efi Manifold

      Professional Products Satin LS1 EFI Manifold with 96 millimeter Opening features a satin finish. This manifold is the result of over one year of development and testing and has proven to provide significant increases in power. In direct comparison dyno tests against a factory LS6 intake manifold, the Typhoon produced 17.7 more horsepower at 6,200 RPM. It also makes more power and torque at low and mid-range engine speeds than other aftermarket manifolds. This design features a larger plenum volume, which makes the manifold suitable for larger displacement engines. The manifold has nitrous bosses positioned on the port runners. 96mm inlet. This manifold can be used with either the stock 91 millimeter LS2 throttle body or various aftermarket large bore throttle bodies. The manifold kit includes high volume fuel rails with stainless steel mounting brackets, stainless hardware, and a -6 AN stainless braided crossover hose. Additional fittings are also supplied that allows connection to the stock fuel inlet line.

      • Improved performance
      • Fuel rails included
      • Brand: Professional Products
      • ASIN: B003TQ468E
      • UPC: 665053520655
      • Part No: 52065

      Efi Manifold C993 Search Results

      Looking for more Efi Manifold similar ideas? Try to explore these searches: Button Down Collar Woven Shirt, Fibre Craft Foam Frames, and Sink Replacement Parts.

      Efi Manifold - Popular Video Reviews

      Modifying a Stock Intake Manifold - Adding EFI

      Efi Manifold

      This is the intake manifold for my Cobra engine. It starts as a stock Edelbrock dual plane, dual quad intake. I mill and weld in the Accel bungs for the high performance injectors. It gets topped off with 2 Accel 1050 CFM throttle bodies mounted to a custom billet spacer.

      • Likes: 163
      • View count: 55635
      • Dislikes: 11
      • Comments: 104
      Tags: custom intake manifold,aluminum welding,fuel injection conversion,edelbrock,accel,miller welder,s...

      Edelbrock EFI - TBI vs Multi-Port EFI

      Efi Manifold

      Ever wonder which EFI system is right for your muscle car, truck or SUV? Well Edelbrock has you covered. Lets take a ride with August to see the differences and what application is right for you. Pro-Flo 3 EFI systems include a choice of two manifolds, fuel rails, injectors, throttle body, sensor...

      • Likes: 231
      • View count: 35379
      • Dislikes: 4
      • Comments: 43
      Tags: Carburetor,Edelbrock,Carbs,intake,carb,Thunder series AVS,Thunder series AVS carbs,Performer,Perf...

      Holley EFI Ford 351W Hi-Ram Manifold

      Efi Manifold

      For all you Ford fans, Holley has released its Hi-Ram manifold for 351Windsor engines. That’s right! A Hi-Ram manifold for Ford 351Windsor engines with a 9.5" deck height is now available! Designed to provide maximum performance for engines with up to 440 cubic inch displacement and max engine sp...

      • Likes: 189
      • View count: 20957
      • Dislikes: 2
      • Comments: 22
      Tags: Holley,Holley Performance Products,Bowling Green Kentucky,cars,vehicles,performance,racing,351W T...


      365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.