Compare Prices

Electret Condenser Boundary Microphone

Electret Condenser Boundary Microphone - Sony ECM-F8 Electret Condenser Microphone with Flat, Boundary Effect Design
Sony ECM-F8 Electret Condenser Microphone with Flat, Boundary Effect

Electret Condenser Boundary Microphone

ELECTRET condenser microphone features flat boundary effect design for recording meetings omni-directional pickup pattern captures voices from all directions L-shaped mini plug 3.3-ft cord long-life battery lasts about 100 hours with SONY CR2025 lithium battery (not included)

  • Electret condenser microphone
  • Omni-directional
  • 50 to 12,000 Hz frequency response
  • Weighs just 0.88 ounces
  • 1.6 kohms output impedance
  • Brand: Sony
  • ASIN: B00005QBV5
  • UPC: 911226292912
  • Part No: ECM-F8
Electret Condenser Boundary Microphone - eBerry Boundary Omnidirectional Condenser Microphone, 3.5mm Plug Stereo Desktop Mic Surface Mounted Mic for Teleconferencing, Meetings & Desktop Computer Use - Cord: 4.6ft, Item: 2 x 2 x 1 inch
eBerry Boundary Omnidirectional Condenser Microphone, 3.5mm Plug Stereo Desktop Mic Surface Mounted Mic for Teleconferencing, Meetings & Desktop Computer Use - Cord: 4.6ft, Item: 2 x 2 x 1

Electret Condenser Boundary Microphone

eBerry - Enjoy the Fruitful Technology eBerry Boundary Omnidirectional Condenser Microphone Note: If the mic and headphone port on your computer/laptop is a 3.5mm combo port, you will need an extra adapter to use this microphone (3.5mm to microphone and headphone adapter). Features: Pick up sound from 360-degree omni direction. Made of premium material and is eco-friendly. Highly sensitive with minimum sound distortion. 10ft ultra long voice pick-up distance. Specifications: Pick-up distance: 10ft/3m Sensitivity: -37 +/- 3dB Frequency response: 100-10KHz SPL: 60dB Plug: 3.5mm Cable length: 4.6ft/1.4m Polar pattern: omni-directional S/N ratio: 70dB 1kHz at 1Pa Item dimension: 2 x 2 x 1 inch

  • UNIQUE APPEARANCE DESIGN: Outstanding diamond shape condenser microphone will light up your desktop and better pick up the sound from 360-degree omni direction.
  • ULTRA SLIM AND PORTABLE: The dimension of this conference microphone is only 2 x 2 x 1 inch, you can put it in your computer bag and use it wherever you need it. Comes with a 3.5mm splitter adapter cable so that you could use this desktop mic on your computer which has a 3.5mm combo port.
  • HIGH SENSITIVITY AND SUPREME PERFORMANCE: The condenser microphone can catch the slightest signal and reproduce your voice vividly like talking face to face, it aslo can pick up your voice from 10ft away, 10 times better than traditional computer microphone.
  • PREMIUM MATERIAL: Made of heavy duty metal filter screen and food-grade polyethylene materials which makes it durable and environment-friendly.
  • MULTI-PURPOSE USE: Ideal for online meeting, business conference and negotiation, video/audio chat, Skype, gaming and more.
  • Color: Black
  • Brand: DricRoda
  • ASIN: B01N10ZSV6
  • Part No: P1611100303A3
Electret Condenser Boundary Microphone - Shure MX391/C Condenser Microphone (Cardioid)
Shure MX391/C Condenser Microphone

Electret Condenser Boundary Microphone

Equipped with features like programmable, silent membrane switches, logic inputs and outputs, and LED indicators, Micro flex Boundary Microphones are the high-quality solution for a range of applications such as altars, boardrooms and distance learning centers.

  • Flat frequency response across the vocal range for uncolored sound. Sleek, low-profile design for unobtrusive appearance.
  • Balanced, transformer less output for increased immunity to noise over long cable runs.
  • Includes attached 4 meter (12 ft) cable terminated with a 4-pin mini connector and separate preamplifier.
  • A rubber strain relief is provided for applications that require removing the 4-pin mini connector and connecting the mic cable directly to screw terminals in the preamplifier.
  • Color: Black
  • Brand: Shure
  • ASIN: B0002IHC6U
  • UPC: 042406051521
  • Part No: MX391/C
Electret Condenser Boundary Microphone - S9G- HIGH QUALITY ELECTRET CONDENSER BOUNDARY MICROPHONE
S9G- HIGH QUALITY ELECTRET CONDENSER BOUNDARY

Electret Condenser Boundary Microphone

Power supply 9 - 52Vdc phantom Directivity Unidirectional Element Back electrets condenser Frequency response 20Hz - 18kHz Impedance 300 ohms (±20%), balanced Max. input sound level 130dB SPL 1kHz Pickup pattern Half cardioids Sensitivity -57dB (±3dB) @ 1kHz Dimensions 90 x 27.5 x 100mm Weight 145g

  • ELECTRET CONDENSER BOUNDARY MICROPHONE
  • A high quality, wide range back electrets microphone for sound reinforcement, recording and other sound pick-up applications.
  • Wide frequency response • -10dB PAD and bass roll-off switches • Power switch with LED indicator • Requires 9-52V phantom power
  • Low profile, pyramid shape, metal housing • 4m, 3-pin mini XLR to 3-pole XLR lead supplied • Non-slip rubber base to minimise pickup of surface vibrations • Supplied in a foam lined plastic carry case
  • Brand: Digiteck
  • ASIN: B0073V8HQS
Electret Condenser Boundary Microphone - AKG PCC160 Professional Boundary Layer Microphone
AKG PCC160 Professional Boundary Layer

Electret Condenser Boundary Microphone

The Crown PCC-160 Boundary Mic is a great mic for theater, large-group performances, lecterns, and happenings. Supercardioid pattern with PCC boundary technology assures phase coherence throughout the audible spectrum, with sensitivity increased by 6dB.

  • Industry standard PCC boundary technology Electret condenser40Hz to 18kHz frequency response
  • Half super-cardioid polar pattern150 ohms impedance22 mV/Pa sensitivity
  • Great for:Theater Large-group performances Lecterns Happenings
  • Brand: AKG Pro Audio
  • ASIN: B003Y55WNS
  • UPC: 885038024897
  • Part No: MICROPCC160
Electret Condenser Boundary Microphone - [WALLER PAA] Pro XLR 3Pin Phantom Power Boundary Tabletop Microphone Mic 6m Cable
[WALLER PAA] Pro XLR 3Pin Phantom Power Boundary Tabletop Microphone Mic 6m

Electret Condenser Boundary Microphone

Pro XLR 3Pin Phantom Power Boundary Tabletop Microphone Mic 6m CableProfessional  XLR Phantom Power Boundary Tabletop Microphone Mic ,with 6m Cable,This high quality table microphones are designed to clearly and evenly pick up participants voices up to 10 feet away. They are true (360°) omni directional boundary microphones offering high sensitivity. This tabletop is a low profile microphone and provides a portable solution.Features:  Hyper-cardioid Omni-directional characteristic and high sensitivity for detailed and directional pick-up LED mute indicator and push on/off mute switch Switchable bass filter to eliminate unwanted low frequency noises Unique design for surface-mount use Rugged housing equipped with rubber base for reducing shock noiseApplication: Conference sound reinforcement, on-location broadcastingSpecification:  Transducer Principle: Back Electret Condenser Directivity Characteristic: Hyper-cardioid Frequency Response: 40Hz-16kHz Sensitivity: -36dB±3dB (0dB=1V/Pa at 1kHz) Output Impedance: 100Ω±30% (at 1kHz) Equivalent Noise Level: ≤26dB A (IEC 581-5) Max. Input SPL: 130dB (THD ≤1.0% at 1kHz) Bass Filter: 10dB/octave at 80Hz Power Requirements: 9-52V DC Phantom Power

  • Professional XLR Phantom Power Boundary Tabletop Microphone Mic , with 6m Cable, This high quality table microphones are designed to clearly and evenly pick up participants voices up to 10 feet away. They are true (360°) omni directional boundary microphones offering high sensitivity. This tabletop is a low profile microphone and provides a portable solution.
  • Benefits: Group teleconferencing in conference rooms and boardrooms Group teleconferencing in classrooms and training/briefing rooms Extraneous noises such as paper shuffling and pen clicking are minimized Portability - whereby microphone may be easily moved around
  • Exceptional coverage area minimizes the number of microphones required Center of table placement permits participants to turn in their chairs and move around Low profile design actually uses the table surface to increase its effectiveness Precisely captures original sound allowing listeners to recognize 'who is talking'
  • Features: Hyper-cardioid Omni-directional characteristic and high sensitivity for detailed  and directional pick-up LED mute indicator and push on/off mute switch Switchable bass filter to eliminate unwanted low frequency noises Unique design for surface-mount use Rugged housing equipped with rubber base for reducing shock noise
  • Application: Conference sound reinforcement, on-location broadcasting Specification: Transducer Principle: Back Electret Condenser Directivity Characteristic: Hyper-cardioid Frequency Response: 40Hz-16kHz Sensitivity: -36dB±3dB (0dB=1V/Pa at 1kHz) Output Impedance: 100Ω±30% (at 1kHz) Equivalent Noise Level: ≤26dB A (IEC 581-5) Max. Input SPL: 130dB (THD ≤1.0% at 1kHz) Bass Filter: 10dB/octave at 80Hz Power Requirements: 9-52V DC Phantom Power
  • Brand: WALLER PAA
  • ASIN: B07HMSQZRZ
  • UPC: 674989658370
Electret Condenser Boundary Microphone - Pyle PDMIC35 Shotgun Microphone Electret Condenser Mic with 16 Foot XLR Cable, Windscreen
Pyle PDMIC35 Shotgun Microphone Electret Condenser Mic with 16 Foot XLR Cable,

Electret Condenser Boundary Microphone

The Pyle PDMIC35 Electret Condenser Shotgun Microphone comes with a 16 ft. XLR Cable. Features: Element: Electret Condenser - Long Range Sensitivity: -38dB (0 dB = 1V/Pa @ 1kHz) - Features: On/Off Switch, Long Distance Range, Side Rejection, Polar Pattern: Super Cardioid - Max SPL Level: 132dB SPL (1kHz THD 1%) - Includes: 16' ft. XLR Cable, Mic Stand Clip, Foam Windscreen, Low noise circuitry - Signal-to-Noise Ratio: 77dB (1kHz @ 1 Pa) Dimensions: 1.2'' x 7.1'', Frequency Response: 20Hz~20kHz - Output Impedance: 75 O, Short Range Sensitivity: -45dB (0 dB = 1V/Pa @ 1kHz) - Power Supply: +48V Phantom Power.

  • Element: Electret Condenser - Long Range Sensitivity: -38dB (0 dB = 1V/Pa @ 1kHz) - Features: On/Off Switch, Long Distance Range, Side Rejection
  • Polar Pattern: Super Cardioid - Max SPL Level: 132dB SPL (1kHz THD 1%) - Includes: 16ft XLR Cable, Mic Stand Clip, Foam Windscreen
  • Low noise circuitry - Signal-to-Noise Ratio: 77dB (1kHz @ 1 Pa) - Dimension: 1.2" x 7.1"
  • Frequency Response: 20Hz~20kHz - Output Impedance: 75 O
  • Short Range Sensitivity: -45dB (0 dB = 1V/Pa @ 1kHz) - Power Supply: +48V Phantom Power
  • Brand: Pyle
  • ASIN: B00GGM6GHM
  • UPC: 688887501102
  • Part No: PDMIC35
Electret Condenser Boundary Microphone - Tascam TM-90BM Boundary Condenser Microphone w/Cleaning Cloth
Tascam TM-90BM Boundary Condenser Microphone w/Cleaning

Electret Condenser Boundary Microphone

Broad coverage for a variety of applications While the TM-90BM does feature a hemispherical pickup patter on the Horizontal plane, it is also a uni-directional condenser mic on the vertical plane, and should be positioned with the TASCAM logo facing the audio source. And being a condenser microphone, the TM-90BM requires Phantom power which can be supplied remotely from your mixer, Mic preamp or audio interface as well as through the use of an on-board dry-cell battery.

  • Back-electret condenser microphone
  • Half super cardioid (Unidirectional)
  • 9 to 52V phantom power supply
  • BASS TILT switch to eliminate unwanted low frequencies
  • Includes hard carry case
  • Brand: Tascam
  • ASIN: B07TN1RJXD
  • UPC: 669818857123
  • Part No: TM90BM
Electret Condenser Boundary Microphone - Peavey PSM 3 Boundary Microphone, Black
Peavey PSM 3 Boundary Microphone,

Electret Condenser Boundary Microphone

The Peavey PSM™ 3 is a boundary microphone that makes tricky micing applications easy

  • Back-electret half-cardioid condenser microphone
  • 9-52 volt phantom power
  • Includes windscreen and mounting bracket
  • 10 ft. Cable
  • Durable and sturdy
  • Legendary Peavey reliability
  • Brand: Peavey
  • ASIN: B004ZZV85M
  • UPC: 014367111934
  • Part No: 577980
Electret Condenser Boundary Microphone - MicW iBoundary
MicW iBoundary

Electret Condenser Boundary Microphone

MicW's iBoundary mic is ideal for meetings, presentations, dictation or anywhere you gotta have absolute speech intelligibility. This mic features high sensitivity and a half-omni directional pickup; just set it on your desktop and let it do what it does: capture crisp, clear sound. It terminates in a 3.5mm connector, making it perfect for recording via Skype or MSN video on your Mac or PC, or for capturing your musical ideas to your smart phone. Cool. But once you factor in its ultra-affordable price, the MicW iBoundary microphone is a gotta-have.

  • Condenser Boundary Microphone with Electret Element
  • Half-omni Polar Pattern
  • 3.5mm TRRS Connector
  • Brand: MicW
  • ASIN: B00CREF4OE
  • Part No: IBOUNDARY

Electret Condenser Boundary Microphone Q519 Search Results

Looking for more Electret Condenser Boundary Microphone similar ideas? Try to explore these searches: Philips Tv Reviews, Cargo Wholesale Leather Belt, and Walkway Christmas Trees.

Electret Condenser Boundary Microphone - Popular Video Reviews

What is a Boundary Microphone?

Electret Condenser Boundary Microphone

Tom Colman, Shure UK joins HowToAV.tv to explain Boundary Layer Microphones, used for conferencing and boardroom applications. Designed for spoken word applications in conference and audio visual systems, designed to be placed flat on a desk or table in front of the speaker. Boundary layer microp...

  • Likes: 40
  • View count: 11428
  • Dislikes: 6
  • Comments: 5
Tags: #howtoav,ciegroup,howtoav.tv,how to av,what is a conference microphone,understanding boundary mic...

Crown Microphones Collection // Best Sellers 2017

Electret Condenser Boundary Microphone

Crown Microphones Collection // Best Sellers 2017 Find out more about these Microphones Click the circle in the corner: https://clipadvise.com/deal/view?id=Amazon-crown-microphones-Microphones-2017-best-sellers For More Details about these Microphones, Click this link Crown Sound Grabber II PZM C...

  • Likes: 3
  • View count: 1646
  • Dislikes: 2
  • Comments: 0
Tags: Crown Sound,Crown Mb3,Crown Pcc170sw,Crown Pzm11,Crown Pcc170swo,Crown Pcc170,Crown Pcc130,Shure ...

Electret Condenser Microphone Wiring

Electret Condenser Boundary Microphone

Please note I have drawn the capacitor with the wrong polarity marker. The + side should be connected to the resistor before the battery. Watch my other video for a more up to date video using an electret mic. http://youtu.be/B_BDtYSDQ9g

  • Likes: 188
  • View count: 66961
  • Dislikes: 21
  • Comments: 80
Tags: Microphone (Fictional Object),Electret Microphone (Invention),Wiring Tutorial Schematic Blues Har...


365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.