Compare Prices

Engine Building Tools

Engine Building Tools - Performance Tool W1231 20-Piece Engine Brush Kit
Performance Tool W1231 20-Piece Engine Brush

Engine Building Tools

20 piece Engine Brush Kit.

  • Ergonomic non-slip molded grip for improved comfort and control
  • Used to clean small tubes, pipes and other hard to clean areas
  • Nylon, brass and stainless steel brushes for various surfaces
  • 1/4" quick change shanks
  • Sizes: 1/4", 3/8", 1/2", 5/8", 3/4" and 1"
  • Brand: Performance Tool
  • ASIN: B00J8333IG
  • UPC: 039564105470
  • Part No: W1231
Engine Building Tools - 24
24" Straight Edge

Engine Building Tools

The Retools 25355 24 Inch Straight Edge features a precision ground edge designed for inspecting engine blocks and cylinder heads for distortion. This straight edge is constructed with 1/4" thick cold rolled steel and is powder coated for durability.

  • Use with a Feeler Gauge to Inspect for Distortion on Engine Blocks, Cylinder Heads, Fly Wheels, Main Bearing Saddles, Cam Bearing Saddles, Cam Covers and Bell Housings
  • Constructed with 1/4" Thick Cold Rolled Steel
  • Precision Ground Edge to +/- 0. 001"
  • Durable Powder Coat Finish
  • Hang Hole for Convenient Storage
  • Brand: OEMTOOLS
  • ASIN: B076ZYJPGR
  • UPC: 076812253552
  • Part No: 25355
Engine Building Tools - Cheesea New Heavy Tu-21 Cylinder Leakage Leak Detector Engine Compression Tester Gauges Set
Cheesea New Heavy Tu-21 Cylinder Leakage Leak Detector Engine Compression Tester Gauges

Engine Building Tools

100% Brand New. Color: See the pictures • Tester checks the amount of leakage in an engine cylinder & helps determine the source. • Best used when comparing a suspect cylinder to a known good cylinder on same engine. • Ideal for testing trucks & late model cars where clearance is minimal. • Equipped with 2-1/2\" input pressure gauge for proper leakage test setup and accurate results. Package Size (LWH): 37cm x 17cm x 8cm/14.4\" x 6.6\" x 3.1\" Designed to detect a variety of common engine faults including: Worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets. Available with either single gauge or twin gauge manifold. Gauges show % of cylinder leakage or cylinder leakage and cylinder pressure. Suitable for use on any petrol engine with 10, 12 or 14mm spark plugs. TU-21 Cylinder Leak Detector Pinpoint the source of compression problems by doing cylinder leak-down tests Works with domestic and import engines Input and leakage gauges with rubberized housing. Air pressure: 0-10 BAR, 0-140 PSI Measures leak percentage from 0-100% 1/8\" NPT manifold ports Package Content: 1 x Cylinder Leak Detector Set Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as ...

  • Designed to detect a variety of common engine faults
  • including: Worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets.
  • Suitable for use on any petrol engine with 10, 12 or 14mm spark plugs.
  • Tester checks the amount of leakage in an engine cylinder & helps determine the source.
  • Ideal for testing trucks & late model cars where clearance is minimal.
  • Brand: Cheesea
  • ASIN: B06XTZJD8D
  • UPC: 603047715878
  • Part No: B06XTZJD8D
Engine Building Tools - PRECISE 2
PRECISE 2" - 6" Bore Gauge 0.001" Increment Set:

Engine Building Tools

This Easy To Read Gauge Has A Great Range Of Connections: 2" - 6"; #11 (4.0"); #10 (3.8"); #9 (3.6"); #8 (3.4"); #7 (3.2"); #6 (3.0"); #5 (2.8"); #4 (2.6"); #3 (2.4"); #2 (2.2"); #1 (2.0"); 2" Connectors; 10" Cylinder. * Gauge Set Comes In It's Own Carrying Case * Easy To Use/ Easy To Read * Professional Quality BLACK FRIDAY Specials -Cyber Monday & Holiday Deal

  • Gauge Set Comes In It's Own Carrying Case
  • Easy To Use/ Easy To Read
  • Professional Quality
  • Brand: Precise
  • ASIN: B0013TO97M
  • UPC: 647829664268
  • Part No: B0013TO97M
Engine Building Tools - Performance Tool Univ W89220 Universal Camshaft Bearing Tool for Installation and Removal
Performance Tool Univ W89220 Universal Camshaft Bearing Tool for Installation and

Engine Building Tools

Performance Tool W89220 Universal Camshaft Bearing Tool for Installation and Removal Kit includes: Expander sleeves, five split driving plates, driving collars, nylon centering cone, driving shaft and extension, instructions and a fitted storage case. Range of 1.125 inch to 2.69 inch (28.85mm - 68.3mm). Removes and installs camshaft bearings in nearly all automobile engines, from compacts to heavy duty trucks. Takes the difficulty out of bearing replacement, drives camshaft bearings smoothly. Expansion sleeve grips firmly and is easy on new bearings. The expander and the split driving plates have a replaceable rubber sleeves.

  • Kit includes: Expander sleeves, five split driving plates, driving collars, nylon centering cone, driving shaft and extension, instructions and a fitted storage case.
  • Range of 1.125 inch to 2.69 inch (28.85mm - 68.3mm).
  • Removes and installs camshaft bearings in nearly all automobile engines, from compacts to heavy duty trucks.
  • Takes the difficulty out of bearing replacement, drives camshaft bearings smoothly.
  • Expansion sleeve grips firmly and is easy on new bearings.
  • The expander and the split driving plates have a replaceable rubber sleeves.
  • Brand: Performance Tool
  • ASIN: B01IRVJJLY
  • UPC: 039564118227
  • Part No: W89220
Engine Building Tools - Moroso 89650 Power Speed Calculator
Moroso 89650 Power Speed

Engine Building Tools

Have a dyno in your back pocket with this handy Moroso power speed calculator. Using information such as tire size, gear ratios, horsepower and displacement, this handy slide tool works out the relationship between them and many more factors that go into building a race-winning car.

  • E.T. and mph
  • Tire diameter to speed and gear ratio
  • Engine displacement to compression ratio
  • Power to weight ratios
  • Auto-math slide tool
  • Brand: Moroso
  • ASIN: B000CON4SO
  • UPC: 084663896507
  • Part No: 89650
Engine Building Tools - ProForm 66844 Connecting Rod Balancer
ProForm 66844 Connecting Rod

Engine Building Tools

Proform Connecting Rod Balancers are designed to hold each end of the rod independently when weighing it on a gram scale. They come with two mandrels to cover most engines, and are ordinarily used with a digital or mechanical weighing scale. These balancers can measure both the big-end and small-end weight of the connecting rod.

  • Designed to hold the rods
  • Two mandrels
  • Used with digital or mechanical weighing scale
  • Can measure both the ends of the rod
  • Easily installed
  • Brand: ProForm
  • ASIN: B000A8J5OY
  • UPC: 037995368440
  • Part No: 66844
Engine Building Tools - Neiko 40447A Rechargeable Underhood Work Light (202 SMD LED Bulbs, 1,200 Lumens Max, 8,000 mAh Li-ion Battery, 2 Brightness Modes)
Neiko 40447A Rechargeable Underhood Work Light (202 SMD LED Bulbs, 1,200 Lumens Max, 8,000 mAh Li-ion Battery, 2 Brightness

Engine Building Tools

The Neiko tools cordless under hood light uses next generation SMD LED bulbs powered by a 8, 000mAh rechargeable lithium-ion battery to clearly illuminate engine compartments in poorly lit work areas, when working from underneath a vehicle, during night-time conditions or during roadside emergencies. Comes equipped with two Detachable magnetic hooks to mount onto metal surfaces. Foam cushioned protective end hooks will not scratch or damage your vehicles finish. Low brightness settings provides 550-650 lumens (6 hour runtime), high brightness setting provides 1100-1200 lumens (3 hour runtime). impact resistant Polycarbonate light housing and lens insure maximum durability and weather resistant design stands up to extended daily use. All steel light holding tube telescopes from 47" to 76" to fit any hood size. Comes with a ul/CUL certified 110-240V AC charger that features overcharge protection for extra reliability.

  • Superior 1, 200 Lumens maximum brightness under hood work light is powered by 202 bulbs of our next generation SMD LED illuminates the entire engine compartment
  • 8,000 mAh large capacity rechargeable li-ion battery provides 3 hours of run time on high mode and 6 hours on low mode, with the added protection of a UL/CUL certified charger
  • Impact resistant Polycarbonate light housing & lens insure maximum durability and weather resistant design stands up to extended daily use
  • All Steel light Holding tube telescopes from 47" to 76" to fit any hood size; foam cushioned protective end hooks will not scratch or damage vehicle finish
  • Two detachable magnetic hooks provide the flexibility of having illumination in cramped, awkward workspaces
  • Brand: Neiko
  • ASIN: B01MTXC016
  • UPC: 816914020085
  • Part No: 40447A
Engine Building Tools - Allstar Performance ALL96475 Plastigage Kit
Allstar Performance ALL96475 Plastigage

Engine Building Tools

Plastigage strings are a simple and accurate way to verify crankshaft, main and rod bearing clearances. Kit includes two green.001" to.003" and one red.002" to.006" (12" long strings) individually packaged inside calibrated sleeves. Detailed instructions are included. The key to success in a car building project is access to high quality, reasonably priced parts that get the job done right. Each All-star part is the result of our dedication to research and development. Once a need is established, parts are designed and manufactured by talented craftsmen, many of whom are racers and hot rodders themselves. Many All-star Performance parts are one-of-a-kind; you won't find them anywhere else.

  • Kit
  • Plastigage
  • Clearance Indicator
  • Brand: Allstar
  • ASIN: B01LZ1RIFS
  • UPC: 848238073836
  • Part No: ALL96475
Engine Building Tools - Take Apart Toy Racing Car Kit For Kids - 30 Pieces With Engine Sounds & Toy Tools For Kids Build Your Own Model Race Car Kit Construction Set
Take Apart Toy Racing Car Kit For Kids - 30 Pieces With Engine Sounds & Toy Tools For Kids Build Your Own Model Race Car Kit Construction

Engine Building Tools

Fun Formula Car Building Tool Set Your Kids Will Love! This car set is fun to take apart and put back together with the power drill. The car can be completely dismantled. This 30-piece set includes 5 car parts, 5 modification parts, 8 tires, drill, drill bit, screws, engine, seat, roof, hood, side bumpers, spoiler, and front bumper The screws are big and easy to use. Also, the car lights up and makes realistic engine sounds with a push of a button. Build the car many different ways with sporty modification parts. Your kids will love putting it all together and taking it apart. Everything on the car can be taken apart. A great toy for boys or girls who love cars or love taking things apart and rebuild them later on. This kids' take-a-part car set for kids improves cognitive and fine motor skills. This Is A Risk-Free Purchase! Add To Cart Today Now!

  • • HAVE FUN WHILE CONSTRUCTING: Forget all those same old toys for kids and get this take apart toy. Teach your kids how to construct things, build your own race car from scratch and have fun through learning. Your little mechanic is going to love this educational toy!
  • • ENHANCE CRITICAL THINKING: Our smart take apart toy will engage your kids into creative thinking. Promote hand-eye coordination, let them develop fine motor skills and boost their memory while keeping them entertained for hours! Who could have thought that a simple car puzzle toy could benefit your kid so much?
  • • DISCOVER ENDLESS POSSIBILITIES: Allow your kids to discover the many possibilities of a take apart racing car toy like this. Perfect toy set for both boys and girls over the age of 3. Let them assemble, dismantle, transform the car the way they want.
  • • YOU GET A FULL SET: Each toy car set includes 30 brightly-colored and chunky pieces. Open the box and find 5 car parts, 5 modification parts, 8 tires, drill, drill bit and screws. Everything on the car can be taken apart.
  • • LIΝK, SECURE & GO: Made from high quality materials, all of the take apart toy pieces have a perfect and snug fit on the car. Your kid will be thrilled with the realistic engine sounds, the vibrant colors and how cool it is to create things on their own..
  • Brand: Toysery
  • ASIN: B072BNDFG8
  • UPC: 619730117256
  • Part No: 43234-2441

Engine Building Tools N595 Search Results

Looking for more Engine Building Tools similar ideas? Try to explore these searches: Platinum Bobble Head, Atv Pro Pack, and Ebc Clutch Plate Set.

Engine Building Tools - Popular Video Reviews

Engine Building Tools

Engine Building Tools

Support Us www.patreon.com/Myvintageiron7512

  • Likes: 485
  • View count: 17047
  • Dislikes: 7
  • Comments: 57
Tags: Tools,Snapon,Ford,Chevy,Dodge,Mopar Roadkill,Hot Rod Garage,Toyota,Machine Shop

Specialty Tools Needed For Engine Assembly

Engine Building Tools

Engine assembly is a time-consuming task. It requires some knowledge, patience, and a good understanding of math and basic mechanics. But if you want to ensure your engine lasts as long as it's supposed to and performs up to its peak potential, you'll need some specialty tools to go along with yo...

  • Likes: 44
  • View count: 1228
  • Dislikes: 1
  • Comments: 1
Tags: Automotive;,Cars;,Vehicles;,How-To;,Auto,News;,Howto;,How,To;,DIY;,Car,Tips

JRP Performance-Engine Blue Printing Tools

Engine Building Tools

Hello everyone, hope you guys are having a great evening. In this short video we showcase our engine building/Blue-printing tools and give some in debt information about how and why each tool is used. Hope you guys enjoy this video! -JRP Performance

  • Likes: 86
  • View count: 1592
  • Dislikes: 0
  • Comments: 9
Tags: gtr,evo,evo8,evo9,evox,evo10,jrp,jrpperformance,evolution,ronibuilt,tuning,dynamometer,dyno,engin...


365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.