Compare Prices

Explorer Hitch

Explorer Hitch - CURT 13386 Class 3 Trailer Hitch, 2-Inch Receiver for Select Ford Explorer and Ford Police Interceptor Utility
CURT 13386 Class 3 Trailer Hitch, 2-Inch Receiver for Select Ford Explorer and Ford Police Interceptor

Explorer Hitch

Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom class 3 hitch is made vehicle-specific. This particular model fits certain years of the Ford Explorer and Ford Police Interceptor Utility (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4, 000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5, 000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to tow utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches ...

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 4, 000 lbs. gross trailer weight, 400 lbs. tongue weight, 5, 000 lbs. weight distribution capacity and 500 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Hitches are tested according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. Trailer hitch installation of this class 3 hitch is made easier with its vehicle-specific design. This hitch offers a custom fit on select models of the Ford Explorer and Ford Police Interceptor Utility, and it comes with all necessary hardware for a complete installation on the vehicle.
  • Color: Black
  • Brand: CURT
  • ASIN: B079R22KCK
  • UPC: 612314133864
  • Part No: 13386
Explorer Hitch - Draw-Tite 76034 Class III Round Max-Frame 2
Draw-Tite 76034 Class III Round Max-Frame 2" Square Receiver Tube

Explorer Hitch

The max-frame class III/IV line of 'tested tough' receiver hitches from Draw-Tite are designed to complement today's trucks, vans and Sport utility vehicles. These stylish trailer hitches accent your vehicle's rugged good looks and blend seamlessly into its overall appearance. Their all-frame attachment points and A-Coat base with black powder coat finish ensure that they will retain their attractive appearance for years to come. The Draw-Tite max-frame receiver hitch boasts a 2" square receiver opening and solid welded construction for maximum strength and durability. The computer aided design (CAD) ensures a perfect fit for your vehicle; every max-frame receiver hitch is custom built according to manufacturer and model-year specifications. These max-frame receiver hitches are rated at up to 8, 000 lbs. Gross trailer weight (GTW) weight carrying (WC) and up to 12, 000 lbs. Gross trailer weight (GTW) with weight distributing (WC). easy, bolt-on installation with simple hand tools; no welding required. All Draw-Tite hitches meet and exceed V-5 and SAE J684 standards and are fully inspected for quality and workmanship and backed with a nationwide limited lifetime warranty. Draw-Tite is the premier brand of custom trailer hitches. Established in 1946, Draw-Tite was born out of a pas...

  • Designed to complement today's trucks, vans and Sport utility vehicles, attach directly to the frame with no drilling or welding necessary
  • 2 inch square receiver tube opening and solid all-welded Construction for maximum strength and durability
  • The A-Coat base with Black powder coat finish is resistant to adverse weather conditions and corrosion, ensures an attractive appearance for years to come
  • Computer-aided design and fatigue stress tested to ensure perfect fit and top towing performance, backed by draw-tite's nationwide limited lifetime warranty
  • Rated at 675/4, 500 lbs. (Tw/GTW) weight carrying (WC) and 500/5, 000 lbs. (Tw/GTW) weight distributing (WD), always consult your vehicle's Owner's manual for actual weight capacities
  • Brand: Draw-Tite
  • ASIN: B072DXRW8J
  • UPC: 742512760347
  • Part No: 76034
Explorer Hitch - CURT 99303 Class 3 Hitch Kit and Wiring Harness (2
CURT 99303 Class 3 Hitch Kit and Wiring Harness (2" Receiver, 4-Way Flat, 2" Trailer Ball), 2

Explorer Hitch

Outfit your vehicle with a complete towing kit with this trailer hitch and wiring harness package. It includes a class 3 hitch, a custom trailer wiring harness, a ball mount, trailer ball and a hitch pin & clip. The class 3 hitch is specifically designed to fit certain years of the Ford Explorer or Ford Police Interceptor Utility. It offers a custom fit and is rated for up to 4,000 lbs. GTW and 400 lbs. TW, as well as 5,000 lbs. WD and 500 lbs. WDTW (limited to lowest-rated towing component). It features a standard 2" hitch receiver and is tested in accordance with SAE J684 for safety. It also has industry-leading rust resistance, inside and out, with its co-cured liquid Bonderite and powder coat finish. Included with this class 3 hitch are a number of trailer hitch accessories. The custom trailer wiring harness equips the Ford Explorer or Ford Police Interceptor Utility with a standard 4-pin trailer wiring harness, and it requires no splicing for installation. Also included in this towing kit is a ball mount and trailer ball. The ball mount perfectly fits the 2" hitch receiver and is tested and rated to 7,500 lbs. GTW. It has a drop of 2" and a rise of 3/4". The trailer ball has a 2" diameter to fit standard 2" trailer couplers. It is rated for 6,000 lbs. ball capacity and insta...

  • Hitch tested and rated for 4,000 lbs. GTW / 400 lbs. TW and 5,000 lbs. WD / 500 lbs. WDTW (limited to lowest-rated towing component)
  • Hitch made with a vehicle-specific design for a custom fit
  • Wiring provides a 4-way flat output at the rear of the vehicle to plug in trailer wiring
  • Ball mount features 3/4" rise, 2" drop and 8-1/4" length, and trailer ball fits 2" coupler
  • Includes class 3 hitch #13100, custom wiring harness #56172, ball mount #45030, trailer ball #40004 and hitch pin & clip #21500
  • Brand: CURT
  • ASIN: B07CZRGHYJ
  • UPC: 612314043705
  • Part No: 99303
Explorer Hitch - Tyger Auto TG-HC3F0198 Class 3 Trailer Hitch Combo with 2
Tyger Auto TG-HC3F0198 Class 3 Trailer Hitch Combo with 2" Receiver Cover & Pin Lock for 2011-2019 Ford

Explorer Hitch

TYGER Hitch Combo includes one Class 3 trailer hitch with mounting hardware and 2inch receiver plug cover and pin lock. Dual stage powder E-coating in unique matte black light textured finish for a tough clean look and long lasting corrosion resistance. Full-stitch welding with extra support plates to add more endurance around the towing ahead for security and meet the highest standard in the industry. All TYGER parts are covered with No-Hassle warranty! Fitment:2011-2019 Ford Explorer.

  • Vehicle-specific design for a custom fit on : 2011-2019 Ford Explorer
  • The kit includes one Class 3 trailer hitch with mounting hardware and 2 inch receiver plug cover and pin lock. Dual stage powder E-coating in unique light textured matte black finish for a tough clean look and long lasting corrosion resistance
  • Full-stitch welding with extra support plates in accordance with the safety standard SAE J684. Gross weight carrying capacity: 5000 LBs Trailer Weight and 500 LBs Tongue Weight
  • Easy No-Drilling installation. All mounting hardware and DIY instruction included
  • Limited Lifetime Warranty against manufacturer defect!
  • Brand: Tyger Auto
  • ASIN: B01N0Z5XG3
  • UPC: 816239023891
  • Part No: TG-HC3F0198
Explorer Hitch - CURT 13112 Class 3 Trailer Hitch, 2-Inch Receiver for Select Ford Explorer and Mercury Mountaineer
CURT 13112 Class 3 Trailer Hitch, 2-Inch Receiver for Select Ford Explorer and Mercury

Explorer Hitch

Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom class 3 hitch is made vehicle-specific. This particular model fits certain years of the Ford Explorer and Mercury Mountaineer (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 800 lbs. WDTW. CURT class 3 trailer hitches are typically used to tow utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it t...

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5,000 lbs. gross trailer weight, 500 lbs. tongue weight, 8,000 lbs. weight distribution capacity and 800 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Hitches are tested according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. Trailer hitch installation of this class 3 hitch is made easier with its vehicle-specific design. This hitch offers a custom fit on select models of the Ford Explorer and Mercury Mountaineer, and it comes with all necessary hardware for a complete installation on the vehicle.
  • Color: Black
  • Brand: CURT
  • ASIN: B000G01J18
  • UPC: 612314231126
  • Part No: 13112
Explorer Hitch - CURT 13550 Class 3 Trailer Hitch, 2-Inch Receiver for Select Ford Explorer, Lincoln Aviator and Mercury Mountaineer
CURT 13550 Class 3 Trailer Hitch, 2-Inch Receiver for Select Ford Explorer, Lincoln Aviator and Mercury

Explorer Hitch

Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom class 3 hitch is made vehicle-specific. This particular model fits certain years of the Ford Explorer, Lincoln Aviator and Mercury Mountaineer (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5, 000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6, 000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to tow utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hit...

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5, 000 lbs. gross trailer weight, 500 lbs. tongue weight, 6, 000 lbs. weight distribution capacity and 600 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Hitches are tested according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. Trailer hitch installation of this class 3 hitch is made easier with its vehicle-specific design. This hitch offers a custom fit on select models of the Ford Explorer, Lincoln Aviator and Mercury Mountaineer, and it comes with all necessary hardware for a complete installation on the vehicle.
  • Color: Black
  • Brand: CURT
  • ASIN: B00075XC8A
  • UPC: 612314135509
  • Part No: 13550
Explorer Hitch - Tow Ready 118540 T-One Connector Assembly for ford Explorer
Tow Ready 118540 T-One Connector Assembly for ford

Explorer Hitch

T-Connector Assembly.

    • Brand: Tow Ready
    • ASIN: B0071XQ56W
    • UPC: 016118110432
    • Part No: 118540
    Explorer Hitch - CURT 13407 Class 3 Trailer Hitch, 2-Inch Receiver for Select Ford Explorer Sport Trac
    CURT 13407 Class 3 Trailer Hitch, 2-Inch Receiver for Select Ford Explorer Sport

    Explorer Hitch

    Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom class 3 hitch is made vehicle-specific. This particular model fits certain years of the Ford Explorer Sport Trac (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5, 000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6, 000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to tow utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for se...

    • DEPENDABLE STRENGTH. This trailer hitch is rated for 5, 000 lbs. gross trailer weight, 500 lbs. tongue weight, 6, 000 lbs. weight distribution capacity and 600 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
    • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
    • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Hitches are tested according to SAE J684 standards for the utmost safety and reliability while towing.
    • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
    • EASY TO INSTALL. Trailer hitch installation of this class 3 hitch is made easier with its vehicle-specific design. This hitch offers a custom fit on select models of the Ford Explorer Sport Trac, and it comes with all necessary hardware for a complete installation on the vehicle.
    • Color: Black
    • Brand: CURT
    • ASIN: B0007VCL22
    • UPC: 612314134076
    • Part No: 13407
    Explorer Hitch - CURT 56172 Vehicle-Side Custom 4-Pin Trailer Wiring Harness for Select Ford Explorer
    CURT 56172 Vehicle-Side Custom 4-Pin Trailer Wiring Harness for Select Ford

    Explorer Hitch

    A CURT custom wiring harness (also called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT's custom wiring harnesses come into play. Custom wiring harnesses plug into your vehicle's electrical system using original equipment (OEM) connectors. Our custom wiring harnesses use two or more OEM connectors to plug in at the taillight assembly and provide a standard trailer socket to allow a trailer to be plugged into your vehicle's power system. This harness provides a 4-way flat connector socket and is designed to be a custom wiring harness for certain years of the Ford Explorer (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). CURT custom wiring harnesses are long-lasting and quick to install. They come with dust covers to keep your connector clean when not in use and feature a one-year limited warranty to give you peace of mind.

    • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer.
    • STANDARD CONNECTOR. The 4-flat trailer wiring can be used to connect trailer taillights, brake lights and turn signals. 4-way trailer wiring is popular on a wide variety of trailers, adding versatile towing options for your vehicle.
    • VEHICLE-SPECIFIC. This vehicle-trailer wiring harness is designed for select models of the Ford Explorer, ensuring the easiest possible installation and the most reliable wiring connection.
    • EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
    • DUST COVER. To promote long-lasting use and weather resistance, this 4-pin trailer wiring harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements and internal corrosion.
    • Color: Multi-Color
    • Brand: CURT
    • ASIN: B00CODRSEW
    • UPC: 612314561728
    • Part No: 56172
    Explorer Hitch - Reese Towpower 51141 Class III Custom-Fit Hitch with 2
    Reese Towpower 51141 Class III Custom-Fit Hitch with 2" Square Receiver

    Explorer Hitch

    Reese Towpower custom built trailer hitches feature solid all-welded construction for maximum strength and safety! Computer aided design, fatigue and stress testing insure a robust design that provides a lifetime of trouble free towing. Each hitch is engineered and "Tested Tough" to deliver the absolute highest quality trailer hitch available anywhere! Looks great and work great with our full line of hitch accessories (sold separately), including our exclusive InterLock hitch ball and ball mount "One Wrench Tightening System"! All of our hitches meet and exceed V-5, CSA and SAE J684 standards and are inspected for quality and workmanship! Designed for a perfect fit and a great look, with many no drill applications for quick and easy DIY installation. The METALSHIELD protective coating process is a three step finish consisting of a rust inhibiting primer, dipped E-coat electrostatic coating to insure total finish coverage and finally an outer powder coat finish for durability. The METALSHIELD process is an OEM compatible finish providing the best corrosion protection over brands that use only powder coat on their products. All our hitches are custom built according to exact manufacturer and model year specifications and test fitted to ensure a perfect fit, ease of installation and...

    • Up to 500 pounds tongue weight and gross towing weight of 5000 pounds - you should always consult the vehicles owner's manual for maximum towing capacity
    • All-welded construction for maximum strength and safety
    • Fatigue and stress testing ensure a strong design that will withstand road abuse
    • Meets and exceeds V-5 CSA and SAE J684 standards and are inspected for quality and workmanship
    • Many no drill applications and MetalShield protective coating for increased corrosion resistance and OEM quality protection
    • Brand: Reese Towpower
    • ASIN: B0049MRILE
    • UPC: 742512511413
    • Part No: 51141

    Explorer Hitch B459 Search Results

    Looking for more Explorer Hitch similar ideas? Try to explore these searches: Lapel Pin Badge Enamel, Diamond Martini Setting Stud Earrings, and 2017 Womens Snowboard Jacket.

    Explorer Hitch - Popular Video Reviews

    2011-2015 Ford Explorer Class III Trailer Hitch install BB5Z-19D520-AA 2012 2013 2014

    Explorer Hitch

    here is a step by step video of how to installed a factory OEM hitch on a 2011-2015 ford explorer part #BB5Z19D520AA .This video also shows how to install the factory 7 pin towing wiring harness. Here is where you can buy this class 3 trailer hitch. The hitch will include the mounting hardware, ...

    • Likes: 357
    • View count: 82820
    • Dislikes: 25
    • Comments: 78
    Tags: 2013,Ford,Explorer,Trailer Hitch,Class III,OEM trailer hitch install,ford explorer,2011,2012,2014...

    Trailer Hitch Installation - 2017 Ford Explorer - Draw-Tite - etrailer.com

    Explorer Hitch

    Click for more info and reviews of this Draw-Tite Trailer Hitch: https://www.etrailer.com/Trailer-Hitch/Draw-Tite/76034.html Check out some similar Trailer Hitch options: https://www.etrailer.com/fitguide.htm Search for other popular Ford Explorer parts and accessories: https://www.etraile...

    • Likes: 28
    • View count: 7986
    • Dislikes: 0
    • Comments: 3
    Tags: Installation of a Trailer Hitch on a 2017 Ford Explorer,Trailer Hitch Installation - 2017 Ford Ex...

    2016 Ford Explorer Sport Hitch Cover Removal

    Explorer Hitch

    There wasn't to many videos showing how to locate and remove the hitch cover for an explorer sport so here you go, I hope this video is helpful. whats nice is the towing package comes with a 4 prong plug and also a 7 prong plug for a bigger trailer that includes trailer brakes.

    • Likes: 46
    • View count: 8216
    • Dislikes: 3
    • Comments: 5
    Tags: explorer sport,2016 explorer sport,hitch cover,towing package,how to,4 prong plug,7 prong plug,ex...


    365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.