Compare Prices

Fender Stratocaster Pots

Fender Stratocaster Pots - ToneShaper Guitar Wiring Kit, For Fender Stratocaster, SSS2 (Modern Wiring)
ToneShaper Guitar Wiring Kit, For Fender Stratocaster, SSS2 (Modern

Fender Stratocaster Pots

This wiring is called "modern" because Fender began using it in the 1980s, as opposed to the 1950s. The original Strat had a master volume control, a tone control for the neck pickup, and a tone control for the middle pickup. There was no tone control for the bridge pickup, since it was assumed that a player would preset his two rhythm settings (neck and middle pickups), but the lead setting (bridge pickup) didn't need to be adjustable, but would be wide open for maximum treble. Remember that during those early years, Fender never supported a 5-way switch. All Strats from 1954 until 1977 shipped with a 3-way switch. In later years, Fender made some changes to the wiring to meet player demands. These included attaching the bridge pickup to the bottom tone control, a no-brainer for many players who felt that if any pickup should allow for some treble roll-off, it was the bridge pickup. The capacitor value on the tone control was changed to .022µF, which means that the tone controls provided less extreme tonal shifts than when a heavier cap was used (the earliest Strats came with a .1µF cap, which produced a very substantial tonal shift as the tone controls were adjusted; this value was changed to .047µF in the early 1960s). (1) Capacitor, .022µF Orange Drop (1) Jack, Swit...

  • For SSS Stratocasters; Modern wiring configures the tone controls like an American-Series Strat
  • The finest OEM component brands, no generic part specs - the RIGHT parts for your application
  • All hardware included, and it's the right hardware - you'll have everything you need
  • Professional wiring diagram - the highest-quality documentation in the industry
  • Nobody knows more about guitar wiring than ToneShapers! We'll help you build a better guitar.
  • Brand: ToneShaper
  • ASIN: B00ZO92VSQ
  • UPC: 852606002410
  • Part No: TS-WK-ST-SSS2
Fender Stratocaster Pots - Fender Stratocaster Strat 5-way Wiring Kit - CRL Switch - CTS Pots
Fender Stratocaster Strat 5-way Wiring Kit - CRL Switch - CTS

Fender Stratocaster Pots

This kit is made up of the best quality parts available including top of the line 450G Series CTS pots with solid brass bushing and shafts, low noise, and special lubricant for smooth operation. The CRL 5 way switch is made in the USA and is spring loaded for smooth and reliable operation. The kit also includes a .022µF Orange Drop capacitor and a genuine Switchcraft output jack. The USA Gavitt Vintage wiring hs been used on Fender and many other guitar and pickup manufacturers since 1940 and features "push-back" cloth covering so it is not necessary to strip the wire before soldering. Kit includes: 1- Original CRL USA 5-way Selector Switch 3- 450G Series CTS 250k Split Shaft Pots w/Solid Brass Bushing & Shaft 1- Orange Drop 022µF Capacitor 1- Switchcraft Output Jack 2- Switch tips (1 black/1 white) 2' USA Gavitt Vintage Cloth Insulated Push-Back Wire - Black 2' USA GavittVintage Cloth Insulated Push-Back Wire - White Wiring Schematic attached on listing

  • Genuine CRL 5 Way Switch
  • CTS 250K SPlit Shaft Pots
  • Gavitt Vintage Wiring
  • Switchcrfaft Output Jack
  • Brand: Custom Shop
  • ASIN: B0089NNAFW
  • UPC: 759681004431
  • Part No: STRAT5WYWIRINGKIT
Fender Stratocaster Pots - Fender Original 250k Splitshaft Potentiometer, Volume or Tone
Fender Original 250k Splitshaft Potentiometer, Volume or

Fender Stratocaster Pots

Original T/V CTL 250K SPLTSHF

  • Fender original factory part
  • 250K split shaft
  • Includes nut, washer, and tonecapacitor
  • For use as a volume or tone control on single coil pickups
  • Brand: Fender
  • ASIN: B0002KZEAE
  • UPC: 717669458171
  • Part No: 099-0830-000
Fender Stratocaster Pots - ToneShaper Guitar Wiring Kit, For Fender Stratocaster, SSS1 (Blender Wiring)
ToneShaper Guitar Wiring Kit, For Fender Stratocaster, SSS1 (Blender

Fender Stratocaster Pots

Teles allow players to select the neck and bridge pickups together, but Stratocasters don't. Many players over the years have added switches to Stratocasters to allow this combination, and the switch is usually a push/pull pot or a mini-toggle. Here's a better idea. Rather then use a switch, we use the bottom tone control to function as the switch. But since this control is a variable resistor, rather than merely switch a pickup on or off, it allows the player to "blend" a pickup into or out of the mix, like a volume control would do. In the full-clockwise position the blender control does absolutely nothing, and in fact makes itself disappear from the circuit so as not to load the circuit (think true bypass). In this position, the 5-way switch functions like a normal Strat, with one volume and one tone control. Turning the control counter-clockwise in positions 1 and 2 blends in the neck pickup, while turning it in positions 4 and 5 blends in the bridge pickup. The player can get lots of subtle tonal coloration with this control. Short-bushing pots, for mounting on a pickguard. (1) Capacitor, .047µF Orange Drop (1) Jack, Switchcraft 1/4" Mono (2) Pot, CTS 250k Audio, Low Torque (1/4" Bushing Length) (1) Pot, CTS Blender, Low Torque (1/4" Bushing Length) (1) Screw ...

  • For SSS Stratocasters; Blender wiring allows neck/bridge combinations not available conventionally
  • The finest OEM component brands, no generic part specs - the RIGHT parts for your application
  • All hardware included, and it's the right hardware - you'll have everything you need
  • Professional wiring diagram - the highest-quality documentation in the industry
  • Nobody knows more about guitar wiring than ToneShapers! We'll help you build a better guitar.
  • Brand: ToneShaper
  • ASIN: B00ZO7ANJM
  • UPC: 852606002403
  • Part No: TS-WK-ST-SSS1
Fender Stratocaster Pots - Deluxe Wiring Kit for Fender Strat - .022 Orange Drop Cap - Stratocaster
Deluxe Wiring Kit for Fender Strat - .022 Orange Drop Cap -

Fender Stratocaster Pots

TAOT Deluxe Wiring Kit for Fender Stratocaster w/ Wiring Diagram. Featuring CTS high quality 450G series potentiometers designed specifically for guitars. 1/4" high X 3/8" diameter bushing with vintage taper volume pot with more gradual taper and greater volume control. Pots require 3/8" mounting hole. All parts in the kit are high quality USA sized parts and are not compatible with import guitars using metric sizing.

  • 1X CTS 450G Series 250K Dish Back Short Split Shaft Vintage Audio Taper VOLUME Pot - 10% Tolerance
  • 2X CTS 450G Series 250K Dish Back Short Split Shaft Audio Taper TONE Pots - 10% Tolerance
  • 1X Oak-Grigsby 5-way Blade Switch w/ White Switch Tip - 1X Switchcraft J11 I/O Jack
  • 1X Orange Drop .022uf Capacitor + 4 Ft. Gavitt Vintage-correct Push Back Wire (2 X Black & 2 X White)
  • Brand: The Art Of Tone
  • ASIN: B00COOFHA8
  • UPC: 091131243442
  • Part No: The-1146
Fender Stratocaster Pots - CTS 250K Short Split Shaft Audio Pots - 450G Series - Lot of 3 (3X) + .022uf Orange Drop cap for Fender Strat
CTS 250K Short Split Shaft Audio Pots - 450G Series - Lot of 3 (3X) + .022uf Orange Drop cap for Fender

Fender Stratocaster Pots

This set up is ideal for replacing pots and cap in your Strat. High quality pots and cap. Not for metric guitars. Please don't flame us because the cap is not a Sprague. Sprague stopped making orange drops in 2012, and Cornell Dubilier has been making them since.

  • 250K ohm, Short (1/4" bushing height) Split Shaft Audio Taper, 10% Tolerance
  • 450G Series with Solid Brass Bushing & Shaft
  • Low Friction Rotation
  • Includes Cornell Dubilier .022uf Orange Drop Capacitor
  • For U.S. Spec Guitars only. Not for use in import guitars with metric components
  • Brand: CTS
  • ASIN: B00GK73HI4
  • UPC: 796762764334
  • Part No: 450GT25K254A2L
Fender Stratocaster Pots - Musical Accessories Wiring Harness Prewired with A500k B500k Pots for Stratocaster Strat Guitar
Musical Accessories Wiring Harness Prewired with A500k B500k Pots for Stratocaster Strat

Fender Stratocaster Pots

Features: Item's color might be different from the picture because of the aberration. Strat Wiring Harness One Volume/Two Tones/5 way switch 2 x A500k,1 x B500k Pots with 18mm Shafts/Base Dia: 16mm .047 capacitors Input Jack This harness is completely prewired. All you need to do is solder your pickups to the switch and ground them to the volume pot. Use this harness for Strats and Strat style guitars with 3 pickups Note: The color of the cables maybe red or black, we will send randomly. Package Includes: 1x Wiring Harness-Prewired with 500k Pots for Strat Guitar

  • Strat Wiring Harness One Volume/Two Tones/5 way switch
  • 2 x A500k,1 x B500k Pots with 18mm Shafts/Base Dia: 16mm .047 capacitors
  • This harness is completely prewired. All you need to do is solder your pickups to the switch and ground them to the volume pot.
  • Brand: Musical Accessories
  • ASIN: B00S6251JY
  • UPC: 702142604138
  • Part No: unknown
Fender Stratocaster Pots - 920D Custom S7W-GILMOUR Upgraded 7 Way Wiring w/Neck On Mod for Strat Guitars
920D Custom S7W-GILMOUR Upgraded 7 Way Wiring w/Neck On Mod for Strat

Fender Stratocaster Pots

Our S7W-GILMOUR style 7-Way Wiring Harness brings the tone control that David Gilmour has used in his famous black strat. The mini toggle adds two extra switch positions on top of the classic 5 positions - Bridge/Neck and Bridge/Middle/Neck. Unlock the tone that greatly influenced the sound of rock with our Gilmour style 7 Way Wiring Harness. Components 3 - 920D Custom 450G Series 250K Pots by CTS 1 - Genuine CRL USA 5-Way Switch 1 - "Neck-On" Mini Toggle 1 - .022µF Orange Drop Capacitor by Sprague Electric 1 - Pure Tone Output Jack 920D Custom Signature Wiring by Gavitt Wire Switch Positions Bridge Bridge/Middle Middle Middle/Neck Neck Bridge/Neck Bridge/Middle/Neck

  • 3 - 920D Custom 450G Series 250K Pots by CTS
  • 1 - Genuine CRL USA 5-Way Switch
  • 1 - "Neck-On" Mini Toggle
  • - .022µF Orange Drop Capacitor by Sprague Electric
  • 1 - Pure Tone Output Jack
  • 920D Custom Signature Wiring by Gavitt Wire
  • Brand: 920D Custom
  • ASIN: B010OQXZE2
  • UPC: 759681083245
  • Part No: S7W-GILMOUR
Fender Stratocaster Pots - Golden Age Premium Wiring Kit for Stratocaster
Golden Age Premium Wiring Kit for

Fender Stratocaster Pots

All the components you'll need for wiring those pickups into your Strat®, plus a wiring diagram to show you how.This premium kit features cloth-covered push-back wire–the right wire for Fender and vintage-style guitar circuitry. The pots in this kit are upgraded to CTS brand for longer life and a smoother, more accurate response.Wiring Kit for Stratocaster includes1/4" Switchcraft output jack (1)250K CTS control pots (3)0.047uF Orange Drop capacitor (1)CRL Lever Switch: 5-way lever switch with mounting screwsSwitch knobs: 1 white and 1 blackNon-shielded cloth-insulated push-back circuit wire: 22 AWG, white, 12" longNon-shielded cloth-insulated push-back circuit wire: 22 AWG, black, 24" longShielded braided push-back circuit wire: 22 AWG, 12" longWiring diagramBe sure your control knobs will fit: CTS pots have a fine-knurled 24-spline split shaft. Coarse-knurled knobs for imported Alpha pots won't fit.CTS control pot specifications:– Shaft diameter: 0.235" (5.95mm) split shaft, fine knurling– Thread: 3/8" x 32– Thread height: 3/8" (9.52mm)– Required mounting hole diameter: 3/8" (9.52mm)CRL 5-way lever switch specifications:– Body cavity depth required: 1-3/8" (34.93mm)– Mounting screw spacing: 1-5/8" (41.28mm)– Lever stem: .052" x .188" (1.32mm x 4.78mm)– Pickgu...

  • All of the components you'll need for wiring your Stratocaster pickups in one convenient kit
  • This premium kit features the right wire for Fender and vintage-style guitar circuitry, and the pots in this kit are upgraded to CTS brand for longer life and a smoother, more accurate response
  • Control knobs NOT included
  • Wiring diagram included
  • See Product Description for full list of kit components
  • Brand: Golden Age
  • ASIN: B01N540837
  • Part No: AN1917
Fender Stratocaster Pots - CTS 250K Short Shaft Audio Pots Lot of 3 (3X) 450G Series w/Orange Drop .047uF Cap
CTS 250K Short Shaft Audio Pots Lot of 3 (3X) 450G Series w/Orange Drop .047uF

Fender Stratocaster Pots

This set up is ideal for replacing pots and cap in your Strat. High quality pots and cap. Not for metric guitars. Please don't flame us because the cap is not a Sprague. Sprague stopped making orange drops in 2012, and Cornell Dubilier has been making them since.

  • CTS 450G series, 250K, short (1/4" bushing) shaft, audio taper, 10% Tolerance
  • Low Friction Rotation
  • For through pick guard and control plate mounts
  • Cornell Dubilier .047uF Orange Drop Capacitor
  • 3/8" bushing diameter not suitable for import guitars
  • Brand: CTS & Cornell Dubilier
  • ASIN: B00GK75WXC
  • UPC: 796762764341
  • Part No: 450GT25K254A2L

Fender Stratocaster Pots J788 Search Results

Looking for more Fender Stratocaster Pots similar ideas? Try to explore these searches: Metallic Gold Kids Shoes, Smooth Chestnut Bone, and 2' Wire Hose Clamp.

Fender Stratocaster Pots - Popular Video Reviews

Upgrading control pots: choosing the right pots and knobs

Fender Stratocaster Pots

http://www.stewmac.com/ Lots of low-cost guitars play great, even though the manufacturers cut costs on hardware and electronics. Swapping out your control pots is an easy mod with big results. Erick Coleman shows you how to avoid trouble… If you have questions, please contact us through our ...

  • Likes: 3397
  • View count: 376541
  • Dislikes: 74
  • Comments: 311
Tags: control pots,potentiometers,wiring,caps,capacitors,humbuckers,singlecoils,single coils pickups,St...

How to wire your stratocaster, test pots, select capacitor and make tone control wiring decisions.

Fender Stratocaster Pots

A step by step demonstration of wiring your stratocaster pickups and controls. How to test audio pots, capacitor selection and tone control options.

  • Likes: 1918
  • View count: 135005
  • Dislikes: 47
  • Comments: 270
Tags: how to videos,fender stratocaster,how to wire your stratocaster,strat pickups swap,changing picku...

Guitar volume pot listening test 500k vs 250k on Humbucker and Single Coils

Fender Stratocaster Pots

Just had to get this one off my chest. Whilst there are many variables to consider, the traditional volume pot values appear to be the best choice in most scenarios. -~-~~-~~~-~~-~- Check out "BIAS AMP 2 Blues Pack - " https://www.youtube.com/watch?v=Xu_WIR_tsGI -~-~~-~~~-~~-~-

  • Likes: 650
  • View count: 107273
  • Dislikes: 168
  • Comments: 202
Tags: guitar volume,volume pot,volume pot value,floyd rose stratocaster


365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.