Compare Prices

Flash Disk Module

Flash Disk Module - Hotusi 40 pin IDE 16GB MLC Vertical DOM/SSD/disk on Module for Industrial or Enterprises PC Internal Hard Drive
Hotusi 40 pin IDE 16GB MLC Vertical DOM/SSD/disk on Module for Industrial or Enterprises PC Internal Hard

Flash Disk Module

  • Fast R/W rate( Read Rate: 30 MB/s, Write Rate: 15 MB/s),auto ECC function
  • High stability and reliability
  • Good vibrating resistance,low consumption
  • No noise & no seek error
  • Easy installation
  • Brand: Meici
  • ASIN: B06Y4SWV1M
  • UPC: 606829854048
  • Part No: 4328515792
Flash Disk Module - Hotusi 40 pin IDE 4GB MLC Vertical DOM/SSD/Disk on Module for Industrial or Enterprises PC Internal Hard Drive
Hotusi 40 pin IDE 4GB MLC Vertical DOM/SSD/Disk on Module for Industrial or Enterprises PC Internal Hard

Flash Disk Module

  • Fast R/W rate( Read Rate: 37 M/s, Write Rate: 12 M/s),auto ECC function
  • Good vibrating resistance,low consumption
  • No noise & no seek error
  • Easy installation
  • High stability and reliability
  • Brand: Hotusi
  • ASIN: B07HFZYXTP
  • UPC: 725423025590
  • Part No: Hotusi
Flash Disk Module - HyperDisk DOM 2GB SLC IDE-40pin Industrial Flash Disk Module SSD for Desktop PC
HyperDisk DOM 2GB SLC IDE-40pin Industrial Flash Disk Module SSD for Desktop

Flash Disk Module

1. It is compatible with traditional HDD mechanical hard disks, and it is more reliable than HDD-free rotating media.2. All-solid structure, industrial standard design, more suitable for industrial products than traditional HDD hard drives.3. Semiconductor storage products based on NAND Flash technology, anti-virus, and more secure.4. It has many advantages such as shock resistance, dustproof, small size, low power consumption and no noise.5. Built-in advanced fault handling system, automatic error correction and rewriting function to ensure data security.6. Unique internal wear leveling algorithm to improve the service life of electronic disk service.7. Safely store data for up to 10 years without battery and power.Parameter:1. Connection type: IDE-40pin.2. Flash type: SLC.3. Product size: 62 x 27 x 6.5mm.4. Input voltage: 5V plus or minus five percent.5. Temperature range: -10-80 degrees Celsius.6. Relative humidity: zero to ninety-five percent RH.7. Working power consumption: 0.9W.8. Standby power consumption: 0.2W.9. Product weight: 10 grams.High Quality

  • It is compatible with traditional HDD mechanical hard disks, and it is more reliable than HDD-free rotating media.
  • All-solid structure, industrial standard design, more suitable for industrial products than traditional HDD hard drives.
  • Semiconductor storage products based on NAND Flash technology, anti-virus, and more secure.
  • It has many advantages such as shock resistance, dustproof, small size, low power consumption and no noise.
  • Brand: ZhiYuan
  • ASIN: B07RMX87Q6
  • Part No: ZHIYUANCOMPUTERS01
Flash Disk Module - Quickbuying 5 PCS CH376S U Disk Read-Write Module USB Flash Disk NetUSB for Arduino
Quickbuying 5 PCS CH376S U Disk Read-Write Module USB Flash Disk NetUSB for

Flash Disk Module

5 PCS CH376S U Disk Read-write Module USB Flash Disk NetUSB For Arduino

    • Brand: Quickbuying
    • ASIN: B07H5JCTHG
    • Part No: pcb board
    Flash Disk Module - Kingspec Industrial Disk on Module PATA IDE 40PIN DOM 16GB Vertical Socket MLC
    Kingspec Industrial Disk on Module PATA IDE 40PIN DOM 16GB Vertical Socket

    Flash Disk Module

    Product Description Interface: 40PIN standard IED interface Capacity: 2GB~64GB Model Number:KDM-40VS.2-XXXGMS Maximum Sequential Read (Max): 55MB/s Maximum Sequential Write (Max): 22MB/s Flash: MLC Warranty: 3 years Certification: CE, RoHS, FCC, KC Form factor:45mm x26mm x 5mm Weight: ≤20g MTBF: 1,000,000 Hours Input voltage: 5V (±5%) Operating Temperature: 0 to 70 °C Storage Temperature: -40 to 85 °

    • Capacity: 16GB
    • Interface: 40PIN standard IED interface
    • Flash: MLC
    • Warranty: 3 years
    • Input voltage: 5V (±5%)
    • ASIN: B00ODYF9W8
    • Part No: Kingspec
    Flash Disk Module - Kingspec 44PIN IDE PATA MLC 2GB 4GB 8GB 16GB 32GB DOM SSD Disk On Module For Network PC,Gaming (44PIN IDE PATA 4GB)
    Kingspec 44PIN IDE PATA MLC 2GB 4GB 8GB 16GB 32GB DOM SSD Disk On Module For Network PC,Gaming (44PIN IDE PATA

    Flash Disk Module

    Specifications 1 Interface protocol: ATA/ATAPI-8; 2 Input voltage: DC 5V (±5%); 3 Operating temperature: 0℃ ~ +70℃; 4 Storage temperature: -20℃ ~ +75℃; 5 physical dimension: 50.7mm length * 26.34mm wide * 6.75mm height error±0.5mm; 6 Write endurance: Write 100GB /Day, theoretically can use 8 years; 7 Read life: unlimited; 8 MTBF: 1,000,000 hours; 9 Support Capacity:4GB 8GB, 16GB, 32GB, 64GB;

    • 44 PIN IDE PATA SSD
    • Capacity:4GB
    • Sequential Read/Write speed: 45/22MB/s
    • MLC NAND FLASH
    • Warranty:3 Years
    • ASIN: B00J3M67GC
    • UPC: 799632220138
    • Part No: 816919-B21-AX
    Flash Disk Module - KingSpec 16GB 2CH 7PIN SATA Disk On Module MLC SATA Flash DOM
    KingSpec 16GB 2CH 7PIN SATA Disk On Module MLC SATA Flash

    Flash Disk Module

    Modle No: SDH-16 Interface: 7-pin SATA Flash type: MLC-NAND flash Maximum sustained reading speed: 84Mbps (for reference only) Maximum sustained writing speed: 27Mbps (for reference only) ECC: supports BCH ECC 8 or 15 bits in 512 bytes Operating temperature: 0 to 70ºC Warranty: MLC 3 years; SLC 5 years Packing: standard gift box Speed: Capacity:8GB/16GB/32GB Channel:2CH/2CH/2CH Read/Write Speed :71/15 Mb/s,84/27 Mb/s/,84/43 Mb/s

    • Interface: 7-pin SATA DOM
    • Flash type: MLC-NAND flash
    • Maximum sustained read/write speed: 84/27Mbps
    • Warranty: MLC 3 years
    • ECC: supports BCH ECC 8 or 15 bits in 512 bytes
    • ASIN: B01LANK1DQ
    • UPC: 746060350791
    • Part No: KDM-SA.72-016GMJ
    Flash Disk Module - SMAKN® CH376S U Disk SD Card Read-write Modules USB Flash Disk SPI for Arduino Raspberr
    SMAKN® CH376S U Disk SD Card Read-write Modules USB Flash Disk SPI for Arduino

    Flash Disk Module

    CH376S U Disk SD Card Read-write Modules USB Flash Disk SPI for Arduino Raspberr

    • --J1, J5 and J6 used in electric or hardware reset after select CH376 with single chip microcomputer communication interface: If the J1 nipple, J5 disconnect, J6 disconnect, so is the 8-bit parallel; If the J1 disconnect, J5 short sub, J6 is short, so is the SPI interface; If the J1 disconnect, J5 disconnect, J6 disconnect, then is asynchronous serial port.
    • --Evaluation board is the main device in the U1 CH376S chips, but some of figure signal was named for CH375 or CH374. --12 MHZ crystal X1 as standard, USB host than USB device requires a higher degree of precision of frequency, the X1 error requirement of less than 0.4 ‰, ordinary 12 MHZ crystal can basically meet the requirements. It is strongly recommended that shorten the related to the length of the lead, in order to reduce interference. --Capacitor C4 for decoupling internal power source node to reduce the EMI of USB transmission, capacity of 4700 to 0.1 uF, pf can choose ordinary 103 patch 0.01 uF capacitance.
    • --P4 is a USB port, can be used for both USB HOST HOST, can also be used for USB DEVICE equipment, resistor R1 used to limit the output current to external USB DEVICE, avoid when just inserted U disk, USB equipment cause the loss of power supply voltage of the short time, and even cause CH376 or microcontroller abnormal reset or internal RAM data error. If it is a USB drive, you should to replace resistor R1 with dc resistance smaller inductance, or alternatively use a set of 5 v power supply directly provide greater working current (more than 500 ma) for external hard drive. In addition, the USB HOST socket of the power supply decoupling capacitors C9 capacity is too small, capacity is big, should be greater than 100 mu F) can reduce the USB device just insert the power supply voltage fluctuations. --P5 is SD card socket, can contact with standard size SD card, other specifications of the SD card can be converted into a need to add. Resistance R3 used to limit the output to external SD card of current, while just insert SD card to avoid power supply voltage drop of a short time.
    • -P1 is a sign of 8 bits parallel ports, used to connect to MCU parallel port, parallel port of the necessary signals including D0 - D7, A0, RD#, WR#, CS# and GND, and INT# is optional. --P2 is the SPI serial port signal, used to connect to MCU SPI interface, the necessary signals including SCS, SCK SPI, SDI, SDO and GND, and INT# is optional. --P3 is asynchronous serial port signal, used to connect to MCU asynchronous serial port, asynchronous serial port needed signal including RXD, TXD and GND, and INT# is optional. P3 provides the SD card at the same time write protect SDWP and plug state SDINSERT signal lines. --J3 is used to select CH376 chips working voltage, short after 1 to 2 feet for 5 V voltage, short after 2 to 3 feet when voltage of 3.3 V. Defaults to 5 V voltage, when the working voltage of the single chip microcomputer is equal to or less than 3.3 V, can choose to CH376 3.3 V voltage. When the working voltage of 5 V CH376 chips, J2 must disconnect, when the working voltage of 3.3 V CH376 chip, J2 must be short.
    • --Some example applications may use single chip microcomputer serial port debug output state information, if need to display the monitoring information, can be controlled by the serial port after RS232 level switch connected to the computer using a serial port monitor/debugging tool software view. If use CH375 evaluation board, J2 can be connected to the computer serial port; If the computer without a serial port or serial port has been occupied by other devices, so can provide the simulation from the USB to serial interface chip CH341 serial port. --CH375 evaluation board inside device in 5 V power supply voltage, the resistance must be combined with R0 and remove 3.3 V voltage regulator D4, when work at 3.3 V power supply voltage, must add stabilizer R0 D4 and remove the resistance. Default is 5 v power supply.
    • Brand: SMAKN
    • ASIN: B00NN4WU2G
    • UPC: 709127311784
    • Part No: 6466760
    Flash Disk Module - Kingspec KingSpec Black MLC Flash DOM Disk On Module 32GB 7PIN SATA SSD
    Kingspec KingSpec Black MLC Flash DOM Disk On Module 32GB 7PIN SATA

    Flash Disk Module

    Modle No: KDM-SA.72-032MJ Interface: 7-pin SATA Flash type: MLC-NAND flash Maximum sustained reading speed: 84Mbps (for reference only) Maximum sustained writing speed: 43Mbps (for reference only) ECC: supports BCH ECC 8 or 15 bits in 512 bytes Operating temperature: 0 to 70ºC Warranty: MLC 3 years; SLC 5 years Packing: standard gift box Speed: Capacity:8GB/16GB/32GB Channel:2CH/2CH/2CH Read/Write Speed :71/15 Mb/s,84/27 Mb/s/,84/43 Mb/s

    • Interface: 7-pin SATA
    • Flash type: MLC-NAND flash
    • Maximum sustained read/write speed: 84/43Mbps
    • Warranty: MLC 3 years
    • ECC: supports BCH ECC 8 or 15 bits in 512 bytes
    • ASIN: B009FX9AEU
    • UPC: 799975199283
    • Part No: 7.99975E+11
    Flash Disk Module - HyperDisk DOM 16GB SLC IDE-44pin Industrial Flash Disk Module SSD for Desktop PC External Hard Drive
    HyperDisk DOM 16GB SLC IDE-44pin Industrial Flash Disk Module SSD for Desktop PC External Hard

    Flash Disk Module

    1. It is compatible with traditional HDD mechanical hard disks, and it is more reliable than HDD-free rotating media. 2. All-solid structure, industrial standard design, more suitable for industrial products than traditional HDD hard drives. 3. Semiconductor storage products based on NAND Flash technology, anti-virus, and more secure. 4. It has many advantages such as shock resistance, dustproof, small size, low power consumption and no noise. 5. Built-in advanced fault handling system, automatic error correction and rewriting function to ensure data security. 6. Unique internal wear leveling algorithm to improve the service life of electronic disk service. 7. Safely store data for up to 10 years without battery and power. Parameters: 1. Connection type: IDE-44pin. 2. Flash type: SLC. 3. Product size: 52x26.7x6.5mm. 4. Input voltage: 5V plus or minus five percent. 5. Temperature range: -10-80 degrees Celsius. 6. Relative humidity: zero to ninety-five percent RH. 7. Working power consumption: 0.9W. 8. Standby power consumption: 0.2W. 9. Product weight: 10g.

      • Brand: Zhangsihong
      • ASIN: B07TZ3P2GY
      • Part No: Zhang516

      Flash Disk Module L638 Search Results

      Looking for more Flash Disk Module similar ideas? Try to explore these searches: Calphalon Steel Chefs Knife, 9' Orange Spots, and Belted Ribbed Cardigan.

      Flash Disk Module - Popular Video Reviews

      8 GB DOM DISK ON MODULE IDE KINGSPEC

      Flash Disk Module

      • Likes: 17
      • View count: 10935
      • Dislikes: 3
      • Comments: 4
      Tags:

      Gigaram IDE disk 40 & 44 pin Disk on Module Showcase

      Flash Disk Module

      8GB Gigaram 44-pin IDE Disk On Module Vertical PATA DOM Features: Support PATA Interface standard -Low power consumption; -Noise free, shock resistant Wear-leveling algorithm ensures reliable data transfer MTBF: 2,000,000 hours; Size: 59*24*6.8mm 40pin IDE -Weight...

      • Likes: 13
      • View count: 12106
      • Dislikes: 0
      • Comments: 4
      Tags: 8GB,Gigaram,44-pin,IDE,Disk,On,Module,Vertical,PATA,DOM,40-pin

      How to use CH376S USB read/write module (by ArduinoBasics)

      Flash Disk Module

      Project Description: This tutorial will show you how to setup and use IC Station's CH376S USB read/write module with an Arduino UNO. The method described is for Serial communication with the CH376S module. Link to full tutorial (including code): http://arduinobasics.blogspot.com.au/2015/05/ch3...

      • Likes: 109
      • View count: 22814
      • Dislikes: 17
      • Comments: 60
      Tags: ArduinoBasics


      365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.