Compare Prices

Gsr Intake Manifold

Gsr Intake Manifold - Skunk2 Racing 350-05-6000 Ultra Race Series Primary Manifold Fuel Rail -8AN Inlet/Outlet 0.669 in. Internal Bore E85/Methanol Compatible For Use w/External Fuel Pressure Regulator Black Ultra Race Series Primary Manifold Fuel Rail
Skunk2 Racing 350-05-6000 Ultra Race Series Primary Manifold Fuel Rail -8AN Inlet/Outlet 0.669 in. Internal Bore E85/Methanol Compatible For Use w/External Fuel Pressure Regulator Black Ultra Race Series Primary Manifold

Gsr Intake Manifold

Engineers at Skunk2 Racing have developed primary and secondary fuel rails for the popular Ultra-Series Race intake manifold. Skunk2’s newest fuel rails are made from 6061-T6 aluminum, features large 0.669-inch internal bores and -8 AN o-ring thread, and can support up to 1,200hp

    • Brand: Skunk2 Racing
    • ASIN: B00GNN3AJ6
    • Part No: 350-05-6000
    Gsr Intake Manifold - Skunk2 309-05-1050 Alpha Series Throttle Body
    Skunk2 309-05-1050 Alpha Series Throttle

    Gsr Intake Manifold

    Skunk2's 70 millimeter Alpha Series throttle body for Honda's B-series engines (also compatible with D-, F-, and H-series) in its exclusive, fine shot-blasted surface finish is designed to be used with factory intake manifolds as well as Skunk2's Pro Series intake manifolds for bolt-on horsepower and torque gains by optimizing engine airflow.

    • Complement your Alpha Series Throttle Body with a Pro Series Intake Manifold for increased airflow
    • Not compatible with engines featuring down-flow intake manifolds Must use Skunk2 Pro Series Intake Manifold or similar
    • Not compatible with B18C GS-R intake manifold Must use Skunk2 Pro Series Intake Manifold or similar
    • Not compatible with '88-'91 D-series intake manifolds Must use Skunk2 Pro Series Intake Manifold or similar
    • Color: Silver
    • Brand: Skunk2 Racing
    • ASIN: B008M5ISGS
    • UPC: 873265004331
    • Part No: 309-05-1050
    Gsr Intake Manifold - Skunk2 307-05-0275 Pro-Series Intake Manifold
    Skunk2 307-05-0275 Pro-Series Intake

    Gsr Intake Manifold

    Skunk2's Black Series Pro Series intake manifold for Honda's B-series VTEC engines (GS-R only) is manufactured of cast aluminum and is a direct-fit replacement that offers significant horsepower and torque gains without compromising mid-range power output.

      • Color: Black
      • Brand: Skunk2 Racing
      • ASIN: B008M5JT2U
      • UPC: 873265001095
      • Part No: 307-05-0275
      Gsr Intake Manifold - Blox Racing BXIM-20100-V3 PERFORMANCE INTAKE MANIFOLDS - VERSION 5
      Blox Racing BXIM-20100-V3 PERFORMANCE INTAKE MANIFOLDS - VERSION

      Gsr Intake Manifold

      Founded in 2003, BLOX Racing is a relative newcomer to the import and sport compact aftermarket. However, in its short time it has quickly established a foothold in the marketplace and developed a reputation as a high quality aftermarket parts manufacturer.

        • Brand: Blox Racing
        • ASIN: B007ZDR22O
        • UPC: 608067824067
        • Part No: BXIM-20100-V3
        Gsr Intake Manifold - OBX Performance Chrome Air Intake Manifold 94-01 Acura Integra GSR 1.8L VTEC B18C
        OBX Performance Chrome Air Intake Manifold 94-01 Acura Integra GSR 1.8L VTEC

        Gsr Intake Manifold

        OBX Racing Sports air intake manifold helps distribute air evenly with individual runners to each intake port in the cylinder head(s) to optimize the efficiency and performance of your engine. Each item is individually hand built from highest grade materials. Extremely competitive pricing that won't break your bank. Needless to say, this is what you can expect from a vendor of the world's largest automobile OEM manufacturer supplier. OBX Performance Chrome Air Intake Manifold 94-01 Acura Integra GSR 1.8L VTEC B18C 2/4 DR Models. Single-stage intake manifold design Significant mid to high range power gains compatible with OE throttle body This chrome intake manifold and will require some basic drilling and tapping to utilize all the factory sensor positions and auxiliaries Made from T-6061 lightweight billet aluminum and chrome plated utilizes factory sensors larger plenum and runners to optimize horsepower Extremely competitive pricing for quality made Direct replacement over your stock oem manifold Provide more air flow for high horsepower application Made from T-6061 lightweight billet aluminum and chrome plated Increase volumetric efficiency by 70% over stock intake manifold 10-15 horsepower increase Backed by Lifetime warranty from manufacturer defects OBX Genui...

        • OBX Performance Chrome Air Intake Manifold 94-01 Acura Integra GSR 1.8L VTEC B18C
        • 10-15 horsepower increase
        • Increase volumetric efficiency by 70% over stock intake manifold
        • Backed by Lifetime warranty against manufacturer defects
        • OBX Genuine Products Design and Quality of OBX U.S.A.
        • Brand: OBX Racing Sports
        • ASIN: B07SSHG56R
        • Part No: MF10098A
        Gsr Intake Manifold - Skunk2 (307-05-0505) Ultra B-Series Black Street Intake Manifold
        Skunk2 (307-05-0505) Ultra B-Series Black Street Intake

        Gsr Intake Manifold

        The engineers at Skunk2 Racing have worked tirelessly to develop the next generation of high performance intake manifolds and are proud to announce the release of the much anticipated Ultra Series Intake Manifold.

        • Hi-Grade Mounting Hardware, 1.82L Plenum Volume, 8.72" Long Runners with Raised Velocity Stacks - Plenty of Material to Port, Unique Mounting Flange Universally Fits All B Series VTEC Heads
        • 74 mm Throttle Body Opening, Includes Thermal Manifold Flange Gasket, Generously Cast Runner Walls for Porting, Fits ALL Popular Chassis Configurations - Not Just Race Cars
        • Will not work with factory throttle body, A minimum of 68 mm throttle body is required
        • Color: Black
        • Brand: Skunk2 Racing
        • ASIN: B00IGWWFHA
        • UPC: 873265007349
        • Part No: 307-05-0505
        Gsr Intake Manifold - Skunk 2 307050270 Intake Manifold for Integra 94-01
        Skunk 2 307050270 Intake Manifold for Integra

        Gsr Intake Manifold

        More than a decade ago, Skunk2's engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2's Pro Series Intake Manifold for Hondas B-series VTEC engines (GS-R only) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the "street enthusiast" who wants more power but doesn't want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2's cast-aluminum Pro Series Intake Manifolds for Honda's B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors' manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate ...

          • Color: Cast Aluminum
          • Brand: Skunk2 Racing
          • ASIN: B000G0T1V8
          • UPC: 873265000432
          • Part No: 307050270
          Gsr Intake Manifold - For Honda/Acura High Flow Cast Aluminum 70mm Intake Manifold Throttle Body (Black) - B16/18 D15/16 H22 F20
          For Honda/Acura High Flow Cast Aluminum 70mm Intake Manifold Throttle Body (Black) - B16/18 D15/16 H22

          Gsr Intake Manifold

          In fuel injected engines, the throttle body is the part of the air intake system that controls the amount of air flowing into the engine, in response to driver accelerator pedal input in the main. The throttle body is usually located between the air filter box and the intake manifold, and it is usually attached to, or near, the mass airflow sensor. So, the simplest but essential way to increase air intake into the engine is increasing the diameter of the throttle body. By doing so, more air volume and higher amount of fuel are introduced, then, higher power will be available at your feet. This Throttle Body would be a must for a tuned or upgraded vehicle with higher than stock horsepower.Package Included:1 x 7mm Aluminum Throttle BodyHardware for InstallationCompatible with:90-01 Acura Integra88-00 Honda Civic88-91 Honda CRX/ CR-X93-97 Honda Del Sol92-01 Honda Prelude97-01 Honda CR-V00-09 Honda S2000 AP1/ AP2Fits most models with 1.5L-2.3L B-Series/ D-Series/ H-Series/ F-Series B16/ B17/ B18/ D15/ D16/ H22A1/ H23A1/ H22A4/ F20C/ F22C1 4Cyl engines ONLYNotes:Minor welding might be required for a few models

          • High Quality Bearing for Full Manipulation over the Valve and Improved Durability
          • Valve Adopted a Butterfly Plate Mechanism for the Best Control
          • OEM Fitment or Aftermarket Replacement, Instantly Increases 7 to 15 Horsepower
          • 70mm (2.75"), Much Larger than Stock Body Diameter
          • 3" Inlet Diameter / Fits with 0.375" Bolt Size
          • Color: Black
          • Brand: Auto Dynasty
          • ASIN: B00UO7G9D6
          • Part No: AD-TB-B16-70MM-BK
          Gsr Intake Manifold - OBX Performance Chrome Air Intake Manifold 94-01 Acura Integra GSR 1.8L VTEC B18C DOHC w Nipples
          OBX Performance Chrome Air Intake Manifold 94-01 Acura Integra GSR 1.8L VTEC B18C DOHC w

          Gsr Intake Manifold

          OBX Racing Sports air intake manifold helps distribute air evenly with individual runners to each intake port in the cylinder head(s) to optimize the efficiency and performance of your engine. Each item is individually hand built from highest grade materials. Extremely competitive pricing that won't break your bank. Needless to say, this is what you can expect from a vendor of the world's largest automobile OEM manufacturer supplier. OBX Racing Sports air intake manifold helps distribute air evenly with individual runners to each intake port in the cylinder head(s) to optimize the efficiency and performance of your engine. Each item is individually hand built from highest grade materials. Extremely competitive pricing that won't break your bank. Needless to say, this is what you can expect from a vendor of the world's largest automobile OEM manufacturer supplier. OBX Performance Chrome Air Intake Manifold w Nipples 94-01 Acura Integra GSR 1.8L VTEC B18C 2/4 DR Models. Single-stage intake manifold design Significant mid to high range power gains compatible with OE throttle body This aluminum intake manifold and will require some basic drilling and tapping to utilize all the factory sensor positions and auxiliaries Made from T-6061 lightweight billet aluminum and chrome plat...

          • OBX Performance Aluminum Air Intake Manifold 94-01 Acura Integra GSR 1.8L VTEC B18C
          • 10-15 horsepower increase
          • Increase volumetric efficiency by 70% over stock intake manifold
          • Backed by Lifetime warranty against manufacturer defects
          • OBX Genuine Products Design and Quality of OBX U.S.A.
          • Brand: OBX Racing Sports
          • ASIN: B07SXS8Z2M
          • Part No: MF10098B
          Gsr Intake Manifold - Skunk2 307-05-0295 Pro-Series Intake Manifold
          Skunk2 307-05-0295 Pro-Series Intake

          Gsr Intake Manifold

          Skunk2's Black Series Pro Series Intake Manifold for Honda's B-series VTEC engines (non-GS-R) is manufactured of cast aluminum and is a direct-fit replacement that offers significant horsepower and torque gains without compromising mid-range power output.

            • Color: Black
            • Brand: Skunk2 Racing
            • ASIN: B008M5JT16
            • Part No: 307-05-0295

            Gsr Intake Manifold O820 Search Results

            Looking for more Gsr Intake Manifold similar ideas? Try to explore these searches: Velvet Bolero Jacket, Engine Cowling, and Head Lice Tea Tree Shampoo.

            Gsr Intake Manifold - Popular Video Reviews

            Mild GSR Build part 1 | Blox Intake manifold install part 1 of 2

            Gsr Intake Manifold

            First actual upgrade.. or is it a downgrade?? Let’s find out. I know it’s not something huge, but this is the most I’ve done to it as far as something performance. There will be 3 parts.. 3 upgrades.. this is the 1st upgrade! one each month.. stay tuned to see me upgrade my stock Integra gsr!

            • Likes: 31
            • View count: 1846
            • Dislikes: 3
            • Comments: 29
            Tags: bloxintakemanifold,blox,intake,manifold,b18c1,b18c5,b18c,DIY,performance,upgrade,hp,install,upgra...

            Finally putting in the Intake Manifold Pt1

            Gsr Intake Manifold

            Finally gonna put my new Skunk2 pro intake Manifold Into the Intagra! ready to get this car breathing correctly Here is Part 1 of hopefully not more than 2

            • Likes: 50
            • View count: 1133
            • Dislikes: 3
            • Comments: 17
            Tags: intake manifold,how to install,acura tl,integra gsr,acura integra,how to,DIY intake manifold,new ...

            B20VTEC GETS NEW INTAKE MANIFOLD AND THROTTLE BODY ! HSG EP. 5-49

            Gsr Intake Manifold

            I install a new intake manifold and throttlebody on the da9 integra ! SHIRTS! https://teespring.com/50k-subs-limited-run#pid=2&cid=576&sid=back https://teespring.com/new-hsg-first-run#pid=2&cid=2397&sid=front INTERESTED IN ANY HUSH PERFORMANCE PRODUCTS? use code "HSG" for discounts! http://hus...

            • Likes: 1107
            • View count: 54426
            • Dislikes: 27
            • Comments: 133
            Tags: honda,civic,acura,integra,ek,eg,ef,ek9,ek4,eg6,street,garage,turbo,honda street garage,hsg,b20vte...


            365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.