Compare Prices

Heatsink Set

Heatsink Set - Raspberry Pi Kit, Aokin Raspberry Pi Cooling Fan 30x30x7mm Brushless CPU Cooling Fan and Raspberry Pi Heatsink Set 1 Aluminum + 2 Copper for Raspberry Pi 3 B+, Pi 3 B, Pi 2 B, RetroFlag NESPI Case
Raspberry Pi Kit, Aokin Raspberry Pi Cooling Fan 30x30x7mm Brushless CPU Cooling Fan and Raspberry Pi Heatsink Set 1 Aluminum + 2 Copper for Raspberry Pi 3 B+, Pi 3

Heatsink Set

Heat Sink Feature:Material: 1 x Aluminum, 2 x Copper Short enough to fit within standard Raspberry Pi cases. Include adhesive real thermal tape for efficient thermal transfer. Dimensions: 90x70x120 mm (L*W*H)120x130x50 mm (L*W*H)120x120x10 mm (L*W*H)Cooling Fan Feature:Color: BlackCurrent: 0.1 A Connector: 2 pin Wire Length: 80 mmWorking Voltage: DC 3.0-5.8 VSize (L x W x H): 30 x 30 x 7 mm Airflow: 5 m³/hBearing Type: Sleeve Speed: 6000 RPM ± 10%Noise Level: 16 dB ± 10%Package Included: 1 pcs Copper Heat Sink1 pcs Copper Heat Sink 1 pcs Aluminum Heat Sink 1 pcs Cooling Fan1 pcs Screw SetsUse for Raspberry Pi 3B+/3B/2B, NESPI Case, Orange Pi etc.This is new mode fan for raspberry pi, since the fan is powerful, so it will be a little noisy (10~15dB) but reduce heat better when you connect to the 5V voltage, if you feel it is noisy, please connect the fan to 3.3V voltage of your Pi, the fan work almost noiseless in 3.3V and meet your daily requirements.Many thanks for your understanding, If there are any questions, please feel free to contact us via Amazon, we will do our best for you.

  • Fan Connector: 2 pins, Rated Voltage: DC 5V, Working Voltage: DC 3.0-5.8 V.
  • Fits perfectly for Raspberry Pi 3 Model B+, Pi 3 Model B, Pi 2 Model B, RetroFlag NESPI Case.
  • Easy to install the fan by screws (length: 15 mm), the heat sinks with adhesive on the back for efficient thermal transfer.
  • The cooling fan run smoothly, work almost noiseless and meet your daily requirements, can keep CPU safe without overheating.
  • 1 x Cool Fan Size (L x W x H): Approximately 30 x 30 x 7 mm + 3 x heatsinks lower your CPU/LAN/RAM chips temp well.
  • Brand: Aokin
  • ASIN: B07HM1QDQL
  • UPC: 701715551008
  • Part No: NA
Heatsink Set - 40 PCS Raspberry Pi Heatsink Kit by Lanpu, High Performance Aluminum Heatsink for Raspberry Pi B B+ 2 and 3, Heatsink Copper Pad Shims, with Thermal Conductive Adhesive Tape
40 PCS Raspberry Pi Heatsink Kit by Lanpu, High Performance Aluminum Heatsink for Raspberry Pi B B+ 2 and 3, Heatsink Copper Pad Shims, with Thermal Conductive Adhesive

Heatsink Set

40 PCS High Performance Raspberry Pi Heatsink Kit Aluminum Heatsink for Raspberry Pi B B+ 2 and 3, Heatsink Copper Pad Shims, with thermal conductive adhesive tape Package Includes: 20 pieces - 8.8mm x 8.8mm x 5mm (0.35in x 0.35in x 0.20in) aluminum heat sinks 10 pieces - 14mm x 14mm x 6mm (0.55in x 0.55in x 0.24in) aluminum heat sink 10 pieces - 15mm x 15mm x 1mm (0.6in x 0.6in x 0.04in) copper heat sink Supported Boards: Raspberry Pi models A, B, B+, 2, and 3 boards Product Features: 40 pieces set of heatsinks for the Raspberry Pi models B, B+, 2, and 3. Reduces CPU and LAN Temperature in Enclosed and Overclocked Environments. Heatsinks are with thermal conductive adhesive tape on the back. Can be used with other devices such as the Beaglebone to cool processors, regulators, etc. These heatsinks are long lasting and have good performance on heat dissipation. Notice: Heatsink kits are small parts, please keep out of the reach of children!

  • ⭐ Includes 30 pcs aluminum heatsink + 10 pcs copper heatsink
  • ⭐ Fits for Raspberry Pi models A, B, B+, 2, and 3 boards, Will fit with most Raspberry Pi cases
  • ⭐ Thermal conductive adhesive tape backing. Peel and stick in the orientation with the most airflow.
  • ⭐ These heatsinks have good performance on heat dissipation and long lasting.
  • ⭐ Can be used with other devices such as the Beaglebone. Raspberry pi not included
  • Brand: Lanpu
  • ASIN: B07D15MDXH
  • UPC: 712962673641
  • Part No: NA
Heatsink Set - 88pcs Heatsink Kit Small to Medium Size Cooler Heat Sink Set for Cooling Development Board Laptop CPU GPU VGA RAM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator
88pcs Heatsink Kit Small to Medium Size Cooler Heat Sink Set for Cooling Development Board Laptop CPU GPU VGA RAM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage

Heatsink Set

Size:Without thermal tape This set of cooler heat sink includes 10 different small to medium range sizes of heatsinks. It is totally composed of 88pcs of heatsinks including: 20pcs 7x7x6mm, 20pcs 9x9x5mm ,10pcs 8.5x8.5x8mm, 10pcs 10x10x10mm, 6pcs 11x11x5mm,6pcs 14x14x7mm, 6pcs 15x15x6.5mm , 6pcs 20x20x6mm, 2pcs 22x22x10mm,2pcs 28X28X8 (L*W*H) .Can be used for cooling of variety of electrical components such as Development Boards VRAM VRM CPU GPU VGA RAM IC Chips LED Laptop MOSFET Transistor SCR Southbridge Northbridge Voltage Regulators.

  • 88pcs small to medium sizes of heat sink
  • 20pcs 7x7x6mm, 20pcs 9x9x5mm, (L*W*H)
  • 10pcs 8.5x8.5x8mm, 10pcs 10x10x10mm, (L*W*H)
  • 6pcs 11x11x5mm,6pcs 14x14x7mm, 6pcs 15x15x6.5mm , 6pcs 20x20x6mm, (L*W*H)
  • 2pcs 22x22x10mm,2pcs 28X28X8 (L*W*H)
  • Brand: SGTKJSJS
  • ASIN: B07PMWGYPV
  • UPC: 635028342100
  • Part No: SRP-88
Heatsink Set - Lanpu 30 PCS Raspberry Pi Heatsink Kit Copper Raspberry Pi Aluminum Heatsink for cooling cooler Raspberry Pi 3, Pi 2, Pi Model B+
Lanpu 30 PCS Raspberry Pi Heatsink Kit Copper Raspberry Pi Aluminum Heatsink for cooling cooler Raspberry Pi 3, Pi 2, Pi Model

Heatsink Set

30 PCS Raspberry Pi Heatsink Kit Package Includes: 10 PCS Raspberry Pi black anodized aluminum copper heatsink, 0.56 x 0.56 x 0.27 inch (14 x 14 x 7mm (L*W*H) 10 PCS Raspberry Pi black anodized aluminum copper heatsink, 0.35 x 0.35 x 0.19 inch (8.8 x 8.8 x 5 mm) (L*W*H) 10 PCS Raspberry Pi copper heatsink, 0.59 x 0.59 x 0.02 inch (15 x 15 x 0.5mm (L*W*H)) Product Feature: - These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. - These heat sinks kit can be applied in other devices to cool processor, regulators, VGA RAM, IC Chips, Mosfet SCR, Southbridge, Northbridge etc. - Suitable for Raspberry Pi models A, B, B+, 2, and 3 boards - Raspberry pi not included

  • Package includes 20 black anodized aluminum & 10 copper heatsink
  • Suitable for Raspberry Pi models A, B, B+, 2, and 3 boards
  • Can be applied with other devices for cooling VGA RAM, IC Chips, Mosfet SCR, Southbridge , Northbridge etc
  • Adhesive thermal tape backing, Raspberry pi not included
  • These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases.
  • Brand: Lanpu
  • ASIN: B079K43ZTZ
  • UPC: 712962673849
  • Part No: Heatsink-10
Heatsink Set - [Updated 8810 Thermal Tape]Raspberry Pi Heatsink, iUniker 15 Pcs Aluminum and Copper Heatsink Cooling Kit with Thermal Conductive Adhesive Tape for Raspberry Pi 3 B+, Raspberry Pi 3 B, Pi 2 B, Pi 1
[Updated 8810 Thermal Tape]Raspberry Pi Heatsink, iUniker 15 Pcs Aluminum and Copper Heatsink Cooling Kit with Thermal Conductive Adhesive Tape for Raspberry Pi 3 B+, Raspberry Pi 3 B, Pi

Heatsink Set

- 10 Pieces cooling aluminium heat sink and 5 Pieces Copper RAM Heatsink for Raspberry Pi 3 B, Raspberry Pi 2 B, Raspberry Pi B+ - These pure heat sinks include adhesive thermal tape for efficient thermal transfer to the heatsink providing additional cooling - These heatsinks have profiles which are short enough to fit within standard Raspberry Pi cases - These heat sinks can be applied in other devices such as BeagleBone - Material: Aluminium  Package includes:  10 x Aluminium Heatsinks5 x Copper Heatsink for RAM

  • Suitable for Raspberry Pi 3 B+, Raspberry Pi 3 B, Raspberry Pi 2 B, Raspberry Pi B+
  • Set of 10 aluminum heat sinks and 5 copper heatsink
  • Adhesive thermal tape on the back
  • Can be applied with other devices such as BeagleBone
  • We are using 8810 Thermal Tape on this heatsink
  • Brand: iUniker
  • ASIN: B076ZH6X9L
  • Part No: IU-RP-038
Heatsink Set - Thermal Adhesive Tape for Heatsink, CPU,GPU, LED, IC Chip Set, 20mm by 25M
Thermal Adhesive Tape for Heatsink, CPU,GPU, LED, IC Chip Set, 20mm by

Heatsink Set

Specification: Dimension: 20mm x 25m Thickness: 0.2mm Reinforcement Carrier : Fiberglass Mesh Thermal Conductivity:1.5 W/m-k Breakdown Voltage: 4KVAC Thermal impedance : 0.3℃in2/w Initial Adhesion: 1.3kg/inch 180°Adhesion power: >16 N/25mm Heat Resistance: 120°C (long time), 180°C ( short time) Applicable temperature range:-30~+120 °C Application: Electronics Components: IC、CPU 、MOS ....... LED、M/B、P/S 、Heat Sink 、LCD -TV 、Notebook PC 、PC、Telecom Device、Wireless Hub DDR Module 、 DVD Applications 、 Hand-set Application Features: ★ Good adhesion (Acrylic PSA) ★ Very good thermal conductivity ★ Soft and compressibility ★ Easy to assemble ★ Long lifetime working normal temperature(80-120℃ ) can work for a minimum of 5 years Notes For Attention: 1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry. 2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength). 3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours to achieve the maximum adhesive strength. That is, at the beginning of...

  • 🥇 Thermal conductive tape with high thermal conductivity performance and insulation, strong adhesion, which can be tightly and firmly fit the heat source devices and heat sink. This strong adhesion and small thermal resistance features effectively replace the grease and mechanical fixation, to achieve the most effective thermal dissipation.
  • 🥇 The double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickiness, while improving the work efficiency. It is widely used for high power LED,High power power supply, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip, high voltage, display, computer, Video Card RAM, DDR Memory Modules, SSD drives,solar, new energy heating power devices.etc,
  • 🥇 Our this thermal tape has thermal conductivity1.5 W/m-k in low price to meet most of electronics heat dissipation demands.
  • 🥇 With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, the double side thermal conductive tape is great helper to solve heat dissipation for many electronics products. And It's non-conductive to prevent any electronics damage.
  • 🥇 Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
  • Brand: HPFIX
  • ASIN: B06ZY1JNJV
  • UPC: 615311854381
  • Part No: CYD-011
Heatsink Set - LoveRPi 5-Pack Black Performance Heatsink Set for Raspberry Pi 3 Model B+ (10 Heatsinks)
LoveRPi 5-Pack Black Performance Heatsink Set for Raspberry Pi 3 Model B+ (10

Heatsink Set

Included Parts: Large Straight-Fin Heatsink with 3M adhesive for SoC Small Straight-Fin Heatsink with 3M adhesive for LAN Chipset Supported Boards: Raspberry Pi 3 Model B+ Raspberry Pi 3 Model B Raspberry Pi 2 Model B Additional Boards supported by Large Heatsink: Libre Computer Board ALL-H3-CC Libre Computer Board AML-S905X-CC Libre Computer Board ROC-RK3328-CC Banana Pi M3 (Allwinner A83T) Orange Pi Boards with Allwinner H2+/H3/H5

  • EXTREME PERFORMANCE: Straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled. Mandatory for applications in high temperature, sealed, or overclocked applications.
  • LONG LASTING EXACT FIT: CPU and LAN chipset heatsinks are fabricated specifically for the Raspberry Pi 3 Model B+ and B. Double-sided 3M thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios.
  • QUICK AND SIMPLE INSTALLATION: Peel and stick in the orientation with the most airflow. Most effective solution for reliable performance and longevity. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT for Raspberry Pi 3 Model B+.
  • NO MORE THROTTLING: Reduce chip hot-spots and increase thermal dissipation surface area by 10x. For Raspberry Pi 3 Model B, cooling amplification for CPU die area is over 100x! Say goodbye to temperature based performance throttling and maintain consistent maximum performance.
  • MUST HAVE FOR RASPBERRY PI 3: At full load, BCM2837 SoC will reach 100°C. That is hot enough to boil water! Together with active cooling an active cooling case like the LoveRPi Active Cooling Media Center PC Case, the heatsink will keep temperatures below 20°C above ambient.
  • Color: Black
  • Brand: LoveRPi
  • ASIN: B01LY2SA08
  • UPC: 647923365870
  • Part No: LRP-5xHS3B
Heatsink Set - Easycargo 9pcs Raspberry Pi Heatsink Kit Aluminum + Copper + 3M 8810 thermal conductive adhesive tape for cooling cooler Raspberry Pi 4, 3 B+, Pi 3 B, Pi 2, Pi Model B+
Easycargo 9pcs Raspberry Pi Heatsink Kit Aluminum + Copper + 3M 8810 thermal conductive adhesive tape for cooling cooler Raspberry Pi 4, 3 B+, Pi 3 B, Pi 2, Pi

Heatsink Set

Includes 6 pieces anodized black aluminum+ 3 pieces copper cooling heat sink set for Raspberry Pi models A, B, B+, 2, 3B, 3 B+ and 4 boards. These pure aluminum (6 pcs) and copper (3 pcs) heatsink include heat conductive adhesive tape for optimum heat transfer. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. These heat sinks kit can be applied in other devices to cool processor, regulators, VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge, Northbridge etc. Package includes: 3 pcs aluminum large heat sink: 0.56 x 0.56 x 0.27 inch (14mm x 14mm x 7mm) (L*W*H); 3 pcs aluminum small heat sink: 0.35 x 0.35 x 0.19 inch (8.8mm x 8.8mm x 5mm) (L*W*H); 3 pcs copper large heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H)

  • Suitable for Raspberry Pi 4, 3 B+, 3, 2, A, B, B+ boards
  • Includes 6 pcs black anodized aluminum + 3 pcs copper heatsink
  • Thermal conductive adhesive tape backing
  • Can be applied with other devices for cooling VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge , Northbridge etc
  • Raspberry pi not included
  • Color: Black (9pcs)
  • Brand: Easycargo
  • ASIN: B073XSLJ9X
  • UPC: 791810638254
  • Part No: ES-H09B-RPI
Heatsink Set - Raspberry Pi Heatsink Set for RP3B, 2B and B+ (Set of 3 Aluminum Heat Sinks)
Raspberry Pi Heatsink Set for RP3B, 2B and B+ (Set of 3 Aluminum Heat

Heatsink Set

  • Set of 3 aluminum heat sinks
  • Adhesive thermal tape backing
  • Fits Raspberry Pi models A, B, B+, 2, and 3 boards
  • Will fit with most Raspberry Pi cases
  • Brand: iphoenix
  • ASIN: B01MYDUASP
  • UPC: 705911333079
  • Part No: RPGHSS
Heatsink Set - LoveRPi 10-Pack Performance Heatsink Set for Raspberry Pi 3 Model B+ (20 Heatsinks)
LoveRPi 10-Pack Performance Heatsink Set for Raspberry Pi 3 Model B+ (20

Heatsink Set

Included Parts: Large Straight-Fin Heatsink with 3M adhesive for SoC Small Straight-Fin Heatsink with 3M adhesive for LAN Chipset Supported Boards: Raspberry Pi 3 Model B+ Raspberry Pi 3 Model B Raspberry Pi 2 Model B Additional Boards supported by Large Heatsink: Libre Computer Board ALL-H3-CC Libre Computer Board AML-S905X-CC Libre Computer Board ROC-RK3328-CC Banana Pi M3 (Allwinner A83T) Orange Pi Boards with Allwinner H2+/H3/H5

  • EXTREME PERFORMANCE: Straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled. Mandatory for applications in high temperature, sealed, or overclocked applications.
  • LONG LASTING EXACT FIT: CPU and LAN chipset heatsinks are fabricated specifically for the Raspberry Pi 3 Model B+ and B. Double-sided 3M thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios.
  • QUICK AND SIMPLE INSTALLATION: Peel and stick in the orientation with the most airflow. Most effective solution for reliable performance and longevity. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT for Raspberry Pi 3 Model B+.
  • NO MORE THROTTLING: Reduce chip hot-spots and increase thermal dissipation surface area by 10x. For Raspberry Pi 3 Model B, cooling amplification for CPU die area is over 100x! Say goodbye to temperature based performance throttling and maintain consistent maximum performance.
  • MUST HAVE FOR RASPBERRY PI 3: At full load, BCM2837 SoC will reach 100°C. That is hot enough to boil water! Together with active cooling an active cooling case like the LoveRPi Active Cooling Media Center PC Case, the heatsink will keep temperatures below 20°C above ambient.
  • Color: Silver
  • Brand: LoveRPi
  • ASIN: B07KF5HDP5
  • UPC: 647923367669

Heatsink Set R481 Search Results

Looking for more Heatsink Set similar ideas? Try to explore these searches: Blue Lamp Base, Softer Plumper Lip, and Ash Rectangular Table.

Heatsink Set - Popular Video Reviews

Install an Intel LGA1150 or LGA1155 CPU Processor as Fast As Possible

Heatsink Set

Intel CPU & Heatsink Installation Guide. This procedure works for LGA1156 as well! FORUM LINK: http://linustechtips.com/main/news-reviews-article-guides/linus-videos-news-and-ramblings/47101-temporary-thread-for-tech-quickie-video-suggestions

  • Likes: 12420
  • View count: 809849
  • Dislikes: 296
  • Comments: 867
Tags: Intel,CPU,Install,Installation,heatsink,1156,1155,LGA1156,LGA1155

DIY Cooler , Peltier module

Heatsink Set

Facebook: https://www.facebook.com/Homemadeprojects1/ Patreon: https://www.patreon.com/homemadeprojects drone advertisement: https://www.banggood.com/DJI-Spark-Drone-2KM-FPV-with-12MP-2-Axis-Mechanical-Gimbal-Camera-QuickShot-Gesture-Mode-Quadcopter-p-1155057.html?utm_campaign=ed7d9c&utm_content=...

  • Likes: 3304
  • View count: 709162
  • Dislikes: 952
  • Comments: 191
Tags: refrigerator,DIY Cooler,12v,peltier,thermoelectric,fridge,prototype,DIY Peltier Freezer,homemade,...

Dual Fan Heatsink For The Raspberry Pi 3 B+ Thermal Test

Heatsink Set

BUY IT HERE Dual Fan Heatsink: https://amzn.to/2tdVR0c In this video, I test out the all-new iUniker Dual fan heatsink for the Raspberry Pi 3 b Plus! ▼▬▬▬▬▬▬ NEED A RASPBERRY PI? ▬▬▬▬▬▬ ▼ Raspberry Pi 3 B Plus: https://amzn.to/2DTF0Db Raspberry Pi 3: https://amzn.to/2I52vvc Raspberry Pi Camera ...

  • Likes: 1036
  • View count: 40947
  • Dislikes: 19
  • Comments: 162
Tags: overclock raspberry pi 3 b+,overclock raspberry pi 3,overclock raspberry pi zero,best raspberry p...


365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.