Compare Prices

Heavy Duty Air Nibbler

Heavy Duty Air Nibbler - Astro Pneumatic Tool 727 ONYX Heavy Duty Air Nibbler
Astro Pneumatic Tool 727 ONYX Heavy Duty Air

Heavy Duty Air Nibbler

The Astro 727 ONYX Heavy Duty Air Nibbler is built for professional grade applications. It works on up to 17-gauge cold rolled steel, and can eat through sheet-metal without deformation of the edges. This unit can cut over an inch a second, with unmatched balance. Specifications: Speed RPM: 3,500 CPM Cutting Capacity: Steel : 17-gauge Air Consumption: 2 cfm Air Inlet: 1/4" Overall Length: 7.7" Weight: 1.79 lbs

  • Brand: Astro Pneumatic Tool
  • ASIN: B01JBO3G2O
  • UPC: 745227023431
Heavy Duty Air Nibbler - Ingersoll Rand EC300 Air Nibbler
Ingersoll Rand EC300 Air

Heavy Duty Air Nibbler

The Ingersoll Rand edge EC300 air Nibbler lets you get a bigger bite and better angle cuts. The EC300 holds a tight 1/4 inch radius with great accuracy giving control and cutting power without distorted edges. Air consumption at load: 17 CFM; air inlet size: 1/4 in. Npt; minimum hose size: 3/8 in.

  • Brand: Ingersoll-Rand
  • ASIN: B00KS6GQKY
  • UPC: 663023115818
Heavy Duty Air Nibbler - Antrader Pneumatic Metal Cutting Shear AT-7038B 7.68
Antrader Pneumatic Metal Cutting Shear AT-7038B 7.68" Pull Type Air Nibbler 16 Gauge Pneumatic Metal Steel

Heavy Duty Air Nibbler

The Best Product to Save Your Time and Money! Specifications: Capacity: Steel: 16 Ga.(1.5mm) Strokes per minute: 3800 SPM Average air consumption: 9.8 SCFM Required air pressure: 90 PSI(6.3 BAR) Air inlet(PT): 1/4" Air hose(ID): 3/8"(Inside diameter) Overall length: 195mm/7.68" Weight: 0.83 KGS/1.83 LBS Packaging Contents: 1 x Air Nibbler(Pull Type) 1 x Male Plug 1 x Manual Warnings: 1. Do not use this tool for other than its intended use. 2. Excessive air pressure or too much free rotation will decrease the life of the tool and may cause a hazardous situation. 3. Check air hose for wear, and keep them away from heat and sharp edges.Do not carry the tool by the air hose. 4. Slip/trip/fall is a major cause of serious injury or even death. Be aware of excess hose left on your walking way or on the working surface and be aware of the whipping air hose too. 5. Continuous operation and bad working condition will injure hands. Once hand numbs or aches, operator shall stop the tool for a while for relaxing and re-start the work after recovery. Operator shall immediately see a doctor if such a serious symptom occurs. Welcome to our store! Enjoy quality and healthy life! We dare to use the new, heart, innovation to supply the best quality products! Any problem please feel free ...

  • Color: Silver Tone, Black
  • Brand: Antrader
  • ASIN: B0786DQLF2
Heavy Duty Air Nibbler - LTMS 021104 Double Head Metal Sheet Nibbler Cutter Drill Attachment with Wrench and Parts Workshop Tool Black 5pcs Set
LTMS 021104 Double Head Metal Sheet Nibbler Cutter Drill Attachment with Wrench and Parts Workshop Tool Black 5pcs

Heavy Duty Air Nibbler

L.TMS - A leading brand and professional producer for high quality cutting tools with a mission to make a difference in cutting. Sheet cutting has never been easier with L.TMS double head sheet metal nibbler cutter. It can be powered by any standard drill with 1500-3000 RPM. Easy operation, simply insert the drive shaft into the drill chuck then tighten the chuck and the nibbler cut is now ready to cut. Cutting sheet material such as steel, iron, copper, aluminum, plastic and fiberglass becomes a much easier job. The DIY lovers dream tool,  it offers 360 degrees adjustable all direction cutting. It comes with all the useful extra parts and pack in the compact portableFeature:✔Suitable for car repair and maintenance and metal sheet productions✔Straight cutting and curve cutting capable✔Double cutting head and 360 degree adjustable✔Excellent cutting effect without any burrs and edges✔Ergonomic design handle for comfort, durable, no distortion, no sparks, efficient and safe✔Compact size, easy to operate and labor-saving, cutting in any direction and angle desired✔Maximum cutting capacities: iron/steel plate 1.8mm, stainless steel plate 1.2mm, copper/aluminium plate 2mm, plastic/fibreglass board 2mm✔Minimum cutting radius: 12mm✔Fits to any electric or pneumatic ...

  • Color: Black
  • Brand: L.TMS
  • ASIN: B0742G5562
  • UPC: 661273179659
Heavy Duty Air Nibbler - CRL Air Power Heavy-Duty Sheet Metal Nibbler
CRL Air Power Heavy-Duty Sheet Metal

Heavy Duty Air Nibbler

Get a bigger bite and better angle cuts with the CRL Heavy-Duty Air Nibbler. Instead of shearing or sawing, this tool actually "nibbles" aluminum, cold rolled steel, plastic and an assortment of other metals up to 18 gauge in thickness. It will not distort the edges of material being cut, and is designed so you can start cuts in the center of a panel and it can hold a tight 1/4 inch (6.4 millimeter) radius with great accuracy. It operates using an air supply capable of 90 P.S.I.

  • Brand: C.R. Laurence
  • ASIN: B00QL4WZDE
  • UPC: 060829127012
Heavy Duty Air Nibbler - Chicago Pneumatic CP835 Heavy Duty Air Nibbler - Pneumatic Nibbler with Four Different Cutting Positions. Shears and Nibblers
Chicago Pneumatic CP835 Heavy Duty Air Nibbler - Pneumatic Nibbler with Four Different Cutting Positions. Shears and

Heavy Duty Air Nibbler

Instead of shearing or sawing, Chicago Pneumatic CP835 Heavy-Duty Air Nibbler is equipped with a punch and die for use in nibbling. Heavy-duty air nibbler from Chicago Pneumatic is an ideal choice for accurate cutting of steel and aluminum metal. Power tool is ergonomically designed to work in tight corners and circles. The pneumatic air tool provides easily access to punch and die for quick replacement. Air-powered tool features a rear exhaust that leads the air away from work area. This air tool is suitable for nibbling plastic, tin, aluminum and other metals.

  • Brand: Chicago Pneumatic
  • ASIN: B000NP2RPI
  • UPC: 015451025106
Heavy Duty Air Nibbler - Neiko 30067A Pull Type Pneumatic Nibbler | 1/4
Neiko 30067A Pull Type Pneumatic Nibbler | 1/4" NPT Air Inlet | 4 CFM, 90 PSI | 3500

Heavy Duty Air Nibbler

Air Nibbler, Pull Type with front exhaust air flow system for use on plastic, tin, aluminum, and other metals up to 18 gauge rolled steel

  • Brand: Neiko
  • ASIN: B002GQ8OJK
  • UPC: 837013300670
Heavy Duty Air Nibbler - 16 Gauge Air Nibbler
16 Gauge Air Nibbler

Heavy Duty Air Nibbler

This air nibbler is much more precise than shears and fits comfortably in the palm of your hand for added control. Make precise, distortion free cuts in 14 gauge aluminum or sheet metal as thick as 16 gauge with this high speed cutter. The air nibbler features a lightweight cast aluminum housing, a polished finish, a high-speed steel cutter and a built-in regulator for increased functionality.

  • Brand: CENTRAL PNUEMATIC
  • ASIN: B00678184G
  • UPC: 792363966511
Heavy Duty Air Nibbler - Performance Tool M552DB Air Nibbler
Performance Tool M552DB Air

Heavy Duty Air Nibbler

Adjustable die guide for left, right or straight cutting. Leaves no burrs or bent edges. Specifications: free speed SPM: 3,500, average CFM: 4.

  • Brand: Performance Tool
  • ASIN: B000KL7MQY
  • UPC: 039564505522

Heavy Duty Air Nibbler C512 Search Results

Looking for more Heavy Duty Air Nibbler similar ideas? Try to explore these searches: Ford Thunderbird Rear Bumper, Skull Head Ring, and Nissan Altima Fuel Filter.

Heavy Duty Air Nibbler - Popular Video Reviews



365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.