Alpine Hardware Cabinet Door/Drawer Hardware Installation Template Combo
Cabinet Door Application: 1 - Align the template and mark door front for knob or pull according to center to center distance and placement desired. 2 - Drill the holes that you marked. 3 - Install the knob or pull. Repeat the process for the other doors. Drawers Application: 1 - Measure and mark the midpoint of the drawer. 2 - Align the center point of the template with the midpoint and mark for knob or pull at desired height. 3 - Drill the holes you marked. 4 - Install the knob or pull. Repeat the process for other drawers.
- WORKS FOR: 3" (76mm), 3-3/4" (96mm), and 5-1/32" (128mm) handles.
- INCLUDED: (1) Cabinet Knob Drilling Template - (1) Cabinet Pull Drilling Template - (1) 3/16" Drill bit
- EASY INSTALLATION: The Alpine Hardware is a CLEAR drilling template that is used for drilling holes that are accurate and precise to your cabinets.
- SIMPLICITY: Easy Instructions are on the back of our product that allow for super easy installation.
- QUALITY GUARANTEE: Alpine Hardware is sold exclusively by Alpine Hardware, if you are unhappy with the product in any way, reach out and Alpine Hardware will get you taken care of.
- Brand: ALPINE HARDWARE
- ASIN: B07RZNR2ZK
- UPC: 682863657517
CosCool Sun Shade Sail Installation Hardware 5 inch Stainless Steel Hardware Kit for Rectangle Shade
This hardware kit set is used for RECTANGLE shade sails installation or reinforcement. A set of hardware kit includes: Turnbuckles: 2 pcs(can be adjust from 6 inches to 8 inches) Pad eyes: 4 pcs Carabineer/hooks: 2 pc Screws: 16 pcs Expansion anchor bolts: 16 pcs Installation manual High quality stainless steel special for outdoor using,anti-rust. High load carrying capacity to keep your sails stable in wind. 100% SATISFACTION GUARANTEE:Fulfilled by Amazon, which means fast delivery and worry-free after-sales service.
- A set of hardware kit for RECTANGLE shade sails includes Turnbuckle(2pcs), Pad eye(4pcs), Carabineer/hook(2pc),Screws(16pcs),expansion anchor bolts(16pcs),and a installation manual.
- Stainless steel(304) hardware kit for Rectangle/Square sun shade sails installation.
- 5 inches means that the length of the turnbuckle can be adjusted from 5 inches to 6.5 inches, By tightening the turnbuckle to generate tension, which can make your shade sails stable.
- High load carrying capacity, and stainless steel has rust-proof properties, so it is especially suitable for outdoor use.
- 100% SATISFACTION GUARANTEE:Fulfilled by Amazon, which means fast delivery and worry-free after-sales service.
- Color: Silver
- Brand: CosCool
- ASIN: B07F9K45ML
- UPC: 715624849835 Part No: COS-KIT-5MM-RE
SMARTSTANDARD 6ft Stainless Steel Sliding Barn Door Hardware Kit -Smoothly and Quietly -Easy to Install -Includes Step-by-Step Installation Instruction Fit 36" Wide Door Panel (J
- WHY CHOOSE US: With 1/3 of the market price, you can get the same quality products here! Premium quality hardware kit are provided along with a completely turnkey experience.
- SIMPLE AND EASY TO INSTALL: Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a Carpenter or decoration team.
- PACKAGE INCLUDED: A Barn Door Hardware Kit (1x 6.0FT Rail,5x Rail Spacers, 2x Rollers, 2x Door Stops, 2x End Caps, 1x Floor Guide, 1 x Hex Key, 1x Door Handle, 1x Door Lock; all other necessary hardware is included as you see in the pictures. For 16 inch stud.) *Door Not Included.
- DOOR WEIGHT CAPACITY: 220 lb; fit door panel Width: 36"; fit door panel thickness: 1 3/8 inch and 1 3/4 inch.
- THE BEST CHOICE FOR YOUR HOUSE: This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door.
- Brand: SMARTSTANDARD
- ASIN: B07R8C51R8 Part No: SDH0060GLASSJ01ST
Muzata Lag Screw Swage Turnbuckle Tensioner for 1/8" Cable Railing,10Pack T316 Marine Grade Stainless Steel Wire Rope Rail Kit Hardware System,Stair Deck CR02 with Installation
Wanna buy everything you need for cable railing project in a minute ? Click "by muzata" near the title to enter muzata one-stop amazon store. Or you could copy following address into browser address bar. http://www.amazon.com/muzata Specification Fit Cable Diameter: 1/8" Material : T316 stainless steel Number of units : 10 PCS Discount Find in this page to get 3%-20% buy together discount . Or you could search ASIN to find products work better with this: B01N0N4IME → 1/8 stainless steel wire rope; B07FK7KVVW → Customized Hydraulic Crimper Superhard Mold for stainless steel； B06XCX2LL7 → Cable cutter up to 5/32"； B07174JGTR → Protector Sleeves
- Deluxe One-piece:This cable railing fitting is well-designed for attractive appearance. One-piece turnbuckle make your stair or deck railing system pretty and elegant
- This deck railing kit is made of T316 marine grade stainless steel, super strong resistance to rust ,water and corrosion.Excellent for both outdoor and indoor at any angle or flat stair's railing or horizontal,vertical,straight cable guardrail
- These cable fittings fit for 1/8" wire rope cable railing system.The hand swage tensioners were designed for wood,steel,aluminum post on deck railing. You will get 10pack lag screw swage turnbuckle to creat 10 runs railing cable.Recommended earch run length less than 10M/32ft
- This deck railing hardware fits is easy to install, You can DIY cable railing system,the swage turnbuckle tensioner could be adjusted to tighten the wire rope
- Recommended this cable railing fitting work together with other Muzata cable railing accessories: MUZATA WR01→1/8" stainless steel wire rope cable,;MUZATA CR09→Customized Hydraulic Crimper Superhard Mold for steel;MUZATA CR12→cable cutter up to 5/32";MUZATA CR25→30 degree angle beveled washer;MUZATA CR13→cable railing sleeves
- Brand: Muzata
- ASIN: B07HMQ2RSY
- UPC: 716150772437 Part No: CR02
Amerock TMPMULTI Cabinet Door/Drawer Hardware Installation Template Combo
The Amerock TMPMULTI Installation Tool Template Door/Drawer Template is Plastic. Amerock markets decorative hardware solutions that inspire, coordinate and help express personal style. For the kitchen, bathroom and the rest of the home, with a variety of finishes and designs for all decorating tastes, Amerock is the ultimate, time-tested source for hardware needs. Amerock markets products in four categories: decorative hardware, decorative hooks, bath accessories and functional hardware.
- Door/Drawer Template
- Functional Hardware
- Quality Installation Tool - For Professional Results
- Color: N/A
- Brand: Amerock
- ASIN: B004SQUD9K
- UPC: 732454261736 Part No: TMPMULTI
Shade Sail Hardware Kit for Triangle Sun Shade Sail Installation 316 Anti-Rust Stainless Steel 6 Inches 2 Bags Courtyard Driveway Patio
Shade Sail Hardware Kit for Triangle Sun Shade Sail Installation 316 Anti-Rust Stainless Steel 6 Inches 2 Bags Set up your triangle shade sail anywhere you would like with hardware kit, tree wall or pole, any structure. Specifications Turnbuckle- A device for adjusting the tension or length of ropes, cables, tie rods, and other tension systems. Snap Hook- A metal loop with a spring-loaded gate, used to quickly and reversibly connect components. Pad Eye- A flat metal plate with a projecting loop or ring, made all in one piece, providing an attachment point. It is secured by screwing, bolting, or welding it in place. Two sets of triangle sun shade sails hardware kit include Turnbuckle x 4pcs Pad eye x 6pcs Snap hook x 2pc Screws x 24pcs MONEY BACK GUARANTEE We provide you good quality products, in case you are not fully satisfied, please contact us through Amazon. LIMITED TIME PRICING Buy now to take advantage of the limited-time special pricing.
- Made from premium quality 318 stainless steel, strong and anti-rust.
- Adjustable turnbuckle to create tension; Length from 6" to 9"
- Includes: 2 bags, Turnbuckle x 4pcs, Pad eye x 6pcs, Snap hook x 2pcs,Screws x 24pcs,Plastic expansion x 24pcs
- Hardware kit for Triangle sun shade sail installation, make your shade sails more stable.
- Sun shade sail hardware kit special for outdoor using such as patio, lawn or garden.
- Color: For Triangle Shade Sails 2 Bags
- Brand: Coconut
- ASIN: B07DHN28XC
- UPC: 659676897928 Part No: 2bagsTrigangle
Industrial By Design - 8-Foot Big Wheel Sliding Barn Door Hardware Kit (Black) - Step-by-Step Installation Video - Ultra Quiet - One-Piece Rail, Industrial Spoke
Barn Door Hardware Video Installation Guide Included: An easy Step-By-Step video tutorial simplifies the installation process to save headaches and help provide the best experience possible.Size Detail: - 96 Inch (8 feet) Single Piece Steel Pre-Drilled Rail: One full 96" rail is included instead of two shorter connecting rails - this is a detail critically important to your project's success. Others discretely offer two separate 4 foot rails, which is structurally less strong, more difficult to install correctly, and requires a disruptive rail connector in the center. We also pre-drill our rails every 16 inches (standard wall stud distance). - Door Width: Our hardware accommodates a wider range in door width than others. Different sized bolts for the hanger straps are included to fit door widths ranging from 1.25 inch to 1.75 inch.
- INCLUDES INSTALLATION VIDEO: Watch our easy step-by-step video to simplify the installation process. Our experienced customer service team is U.S. based and quick to respond to any questions.
- ONE-PIECE RAIL: One full 96" rail is included. Others discretely provide two separate connecting 4 foot rails, which is structurally less strong, more difficult to install correctly, and requires a disruptive rail connector.
- INDUSTRIAL STYLE: Add an industrial, modern, or rustic look to any space with this big spoke wheel kit.
- SUPERIOR STRENGTH: Supports 225 lbs. comfortably. We take pride in delivering a top quality product with unmatched customer service.
- MONEY BACK GUARANTEE: 100% money back guarantee if you are not satisfied with this product.
- Color: Black
- Brand: Industrial By Design
- ASIN: B07663Y65F
- UPC: 765407302323 Part No: BDH8SINGLEBIG
Liberty AN0251C-CL-U Alignright Cabinet Hardware Knob/Pull Mounting
Mark It, Drill It, and Mount It with the AlignRight Cabinet Hardware Mounting Kit from Liberty. This kit includes both door and drawer mounting templates, making it ideal for full kitchen or vanity installations. Clearly marked common hole placements make knob and pull installation a breeze by allowing you to precisely mark the correct mounting holes every time.
- Made from durable plastic with molded measurement lines
- Clear smoky finish allows users to see through the template for enhanced usability. Step by step visual Instructions included on the back of the packaging
- Designed for use with any knob and for common pull sizes up to 5-1/16 in. (128 mm) center-to-center
- Includes a 3/16 in. (5 mm) standard drill bit to ensure correctly sized mounting holes
- Template allows for easy installation of pulls up to a maximum center to center measurement of 5-1/16 inch
- Brand: Liberty Hardware
- ASIN: B01ENVZ1VO
- UPC: 885785007853 Part No: AN0251C-CL-U
Awroutdoor Shade Sail Hardware Kit, Stainless Steel Hardware Kit for Triangle Square Rectangle Sun Shade Sail Installation for Garden Patio Lawn,42
Create a shady spot in your yard or on your patio with the Sun Shade Sail Hardware Kit from Awroutdoor, You'll be able to relax in comfort under the shade. With snap hooks, turnbuckles and pad eyes, this hardware kit allows for easy and secure installation of your square-shaped or triangle- shaped king canopy sun shade sail. No matter where you set up your sun shade, you'll be able to relax in comfort under the shade it gives you. Our Awroutdoor shade sail hardware kit solutions are constructed from high-quality, Anti-rust stainless steel to endure in any demanding outdoor environment. Awroutdoor can help you create your own structural shade awning, in a three- or four-sided style, to provide the just-right amount of shade and protection for your unique space. Feature: - Material: Made of high quality anti-rust Material.. - Weight: 330g/0.72lb - Adjustable turnbuckle: helps create tension - Plastic expansion: help rectangle shade sail be attached to any concrete wall - Easy to operate and applicable to most of the shade sail - Comes with everything you need to hang a shade sail. Please Notice: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2.Please allow sli...
- 【Upgraded Anti-rust Material】Awroutdoor shade hardware is made of high quality 304 Anti-rust stainless steel, waterproof,rainproof,rust-resistance . it is not easy to rust even in rainy environment, durable and not easy to damage. The set are designed for durability and dependability, and comes with the essentials you need to safely and easily suspend your shade sail. which can make it easy to install rectangle shade sail.
- 【Hardware Kit Includes】 Awroutdoor shade sail accessories set includes: Turnbuckle( 4.5") x 2pcs, Pad eye x 4pcs, Snap Hook x 2pcs, S-shape Hook x 2pcs ,Screw x 16pcs, Plastic expansion x 16pcs.
- 【Adjustable Turnbuckle 】The length of turnbuckle is adjustable ,Length from 4.5" to 6.5", Adjustable turnbuckle to create tension, which works great to tighten or loosen the sun sail. Getting the canvas nice and taught without the dreaded sagging. The two ends of the turnbuckle are hooks, can be removed, such as in a storm, take off the turnbuckle together with sunshade sail. Next time, hanging must be simple and convenient.
- 【Plastic Expansion】 Our sail shade hardware kit has configured extra plastic expansion to fit screws. it can help rectangle shade sail be attached to any concrete wall, between stable pillar, or wherever you want it. The screws works more firmly with plastic expansion better than directly attached to the wall.
- 【Suitable For Solid Structures】This Hardware kit is ideal for installing triangle, square and rectangular sun sail shades to all solid structures such as concrete, brickwork and wooden beams.
- Brand: Awroutdoor
- ASIN: B07SXGKZX2
- UPC: 602318789440
SMARTSTANDARD 12ft Heavy Duty Double Door Sliding Barn Door Hardware Kit - Smoothly and Quietly -Easy to install -Includes Step-By-Step Installation Instruction Fit 36" Wide Door Panel(J Shape
ATTENTION: If there is any part missed during the shipping, please feel free to contact with us and we will ship you the missing part as soon as possible. This new SMARTSTANDARD Country Black Steel Sliding Barn Wood Door Hardware can transform your doorway into a side sliding entry. This is a popular new way to bring innovation into the home and close off bedroom and side room in a stunningly unique way. 1. Hole spacer of the rail is 16". It is good for standard wall stub. 2. Detailed instruction: use both words and pictures to display the steps of installing the barn door hardware. 3. All the measurements are in inch rather than in centimeter. 4. All our products have "SMARTSTANDARD" Logo on the package. Brand: SMARTSTANDARD IMPORTANT: Only SMARTSTANDARD is the legal seller of this product. All product from other sellers are fake imitation and not under warranty policy.
- WHY CHOOSE US: with 1/3 of the market price, you can get the same quality products here! premium quality hardware kit are provided along with a completely turnkey experience.
- SIMPLE AND EASY TO INSTALL: professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a Carpenter or decoration team.
- PACKAGE INCLUDED: A barn door Hardware kit (2x 6ft Rail,9x Rail Spacer,4x Roller,4x Door Stop,4x End Cap,2x Floor Guide,1x Hex Key;All other necessary hardware is included as you see in the pictures. For 16 inch stud.) DOOR NOT INCLUDED.
- DOOR WEIGHT CAPACITY: 150lb-200lb; fit door panel Width: 36"; door panel thickness: 1 3/8" and 1 3/4".
- THE BEST CHOICE FOR YOUR HOUSE: this modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door.
- Brand: SMARTSTANDARD
- ASIN: B07JP1JPSR Part No: SDH1200STAIN0203
Installation Hardware R853 Search Results
Installation Hardware - Popular Video Reviews
How to: Install computer's hardware components
- Likes: 42
- View count: 16126
- Dislikes: 7
- Comments: 0
Hardware Installation error During the Installation of the Device error in Windows® XP
Are you getting the error message “Cannot Install Hardware. An Error Occurred During the Installation of the Device” on installing a device on your Windows® XP computer? Watch this video and follow the steps to fix the “Cannot Install Hardware. An Error Occurred During the Installation of the Dev...
- Likes: 41
- View count: 17344
- Dislikes: 8
- Comments: 6
MiraScreen 2.4G Hardware installation
- Likes: 25
- View count: 33646
- Dislikes: 29
- Comments: 2
365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.