Compare Prices

Lower Bearing Case

Lower Bearing Case - Nice Thrust Bearing 6031/4V Full Complement Of Balls, Case Hardened Carbon Steel, 0.5000
Nice Thrust Bearing 6031/4V Full Complement Of Balls, Case Hardened Carbon Steel, 0.5000" Bore x 1.0000" OD x 0.3440"

Lower Bearing Case

The 600 Series is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from strip steel and are carefully heat treated. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore. RBC Nice Bearings is a subsidiary of RBC Bearings. RBC Bearings has been providing bearing solutions to our customers since 1919. A publicly-traded company (NASDAQ: ROLL), RBC currently has 23 manufacturing facilities worldwide, with 18 located in the USA.

  • These bearings are shipped oiled with a rust preventative
  • Soft steel band offers ease of installation
  • Full complement of balls for increased capacity
  • Suitable for lower speed applications of up to 1000 rpm
  • Soft steel band serves as a dust shield
  • Brand: Nice
  • ASIN: B0034G64XE
  • UPC: 637400410308
  • Part No: 6031/4VBF53
Lower Bearing Case - Marine Lower Bearing Carrier Puller
Marine Lower Bearing Carrier

Lower Bearing Case

This powerful screw drive Lower Bearing Carrier Puller will remove the toughest Lower bearing carrier from lower units. Unique swinging arms adjust to various size gear cases. Ball bearing head for zero friction and maximum pulling power.

  • Lower Bearing Carier Puller
  • Adjustable arms fits most gearcase
  • Yamaha, Johnston, Evinrude, Mercury, Honda, Mercruiser
  • Brand: Marine Tech Tools
  • ASIN: B01II9SQUA
  • UPC: 019962666735
  • Part No: AMT0017
Lower Bearing Case - Nice Thrust Bearing 606V Full Complement Of Balls, Case Hardened Carbon Steel, 0.6250
Nice Thrust Bearing 606V Full Complement Of Balls, Case Hardened Carbon Steel, 0.6250" Bore x 1.4219" OD x 0.4530"

Lower Bearing Case

The 600 Series is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from strip steel and are carefully heat treated. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore. RBC Nice Bearings is a subsidiary of RBC Bearings. RBC Bearings has been providing bearing solutions to our customers since 1919. A publicly-traded company (NASDAQ: ROLL), RBC currently has 23 manufacturing facilities worldwide, with 18 located in the USA.

  • These bearings are shipped oiled with a rust preventative
  • Soft steel band offers ease of installation
  • Full complement of balls for increased capacity
  • Suitable for lower speed applications of up to 1000 rpm
  • Soft steel band serves as a dust shield
  • Brand: Nice
  • ASIN: B0034G64XO
  • UPC: 637400410445
  • Part No: 606VBF53
Lower Bearing Case - ARCTIC F12-120 mm Standard Low Noise Case Fan - Fluid Dynamic Bearing - Innovative Design
ARCTIC F12-120 mm Standard Low Noise Case Fan - Fluid Dynamic Bearing - Innovative

Lower Bearing Case

Long Service Life The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life. Innovative Design Enables Quiet and Efficient Ventilation The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimizing the noise level yet delivering the desired airflow and pressure. Two Way installation Blows warm air out of the case and can also draw cold air into the case to fulfil your preference on the airflow pattern within the PC case. Fan Speed: 1,350 RPM (@ 12 V DC) 900 RPM (@ 7 V DC) 650 RPM (@ 5 V DC) Air Flow: 74 CFM / 126 m³/h (@ 1.350 RPM) Noise Level: 0.3 Sone (@ 1.350 RPM) Connector: 3-pin Warranty: 6 years limited (Contact Manufacturer ARCTIC)

  • INNOVATIVE DESIGN ENABKES QUIET AND EFFICIENT VENTILATION: The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimizing the noise level yet delivering the desired airflow and pressure.
  • TWO WAY INSTALLATION: Blow warm air out of the case. Draw cool air into your case.
  • LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.
  • 1,350 RPM @ 12 V / Max. Airflow 53 CFM (126 m³/h).
  • Set the fan speed by using a different voltage (5-12V)
  • Brand: ARCTIC
  • ASIN: B002KTVFTE
  • UPC: 872767002623
  • Part No: AFACO-12000-GBA01
Lower Bearing Case - MERCRUISER ALPHA ONE GEARCASE SEAL & BEARING KIT | GLM Part Number: 25110; Sierra Part Number: 18-8207; Mercury Part Number: 31-803068T1
MERCRUISER ALPHA ONE GEARCASE SEAL & BEARING KIT | GLM Part Number: 25110; Sierra Part Number: 18-8207; Mercury Part Number:

Lower Bearing Case

For MC-1/R

    • Brand: GLM
    • ASIN: B004AQVHOI
    • Part No: 25110
    Lower Bearing Case - AC Infinity AXIAL 8038, Quiet Muffin Fan, 115V 120V AC 80mm x 38mm Low Speed, for DIY Cooling Ventilation Exhaust Projects
    AC Infinity AXIAL 8038, Quiet Muffin Fan, 115V 120V AC 80mm x 38mm Low Speed, for DIY Cooling Ventilation Exhaust

    Lower Bearing Case

    Product Description The heavy duty axial fan kit is designed for custom projects and as a replacement fan. The fan runs on 100 to 125V AC and contains everything needed to easily mount the fan and power it through a wall outlet. Includes a 4 foot power cord that can be easily attached to the fan's metal terminals and allows it to be powered through a wall outlet. The plug cord can also be cut and be converted into lead wires to be connected to a wired AC power source. Also includes two 80 millimeter metal fan guards and a mounting screw set. AC Infinity fans are certified by CE, UL, TUV, and RoHS. Heavy Duty Construction The fan's housing is constructed of die-cast aluminum painted black and able to perform well in harsh environments and withstand shocks. Its impeller and blades are molded with thermoplastic and meets UL 94 standards for resistance to flammability. Impedance protected motors contains windings that have a higher resistance to heat during a rotor lock. Containing long life dual ball bearings, the fans can be run continuously for 67,000 hours and be mounted in any direction. Applications This low speed fan is suitable in applications that requires a lower noise level and can accept a weaker airflow. Popular uses include theater cabinets, woodstove heaters, room to r...

    • Designed for projects that requires cooling or ventilation; or as a replacement fan for various products.
    • Includes a heavy-duty aluminum fan with power plug cord, two fan guards, and mounting screw set.
    • Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
    • Low Speed: Has a lower noise and airflow rating than high speed models.
    • Dimensions: 80 x 80 x 38 mm | Airflow: 23 CFM | Noise: 28 dBA | Bearings: Dual Ball
    • Brand: AC Infinity
    • ASIN: B009OXTWZI
    • UPC: 854759004273
    • Part No: LS8038A-X
    Lower Bearing Case - Cooler Master Sleeve Bearing 80mm Silent Fan for Computer Cases and CPU Coolers
    Cooler Master Sleeve Bearing 80mm Silent Fan for Computer Cases and CPU

    Lower Bearing Case

    The 80mm slim fan is designed for special application spot cooling in Cooler Master chassis. These slim fans are low profile and designed to fit better in CM 690, CM 590 and CM 690 II Advanced and Basic models.

    • Recommended for CM 690 / 590 / 690 II
    • Efficient 11-blade fan design for increased cooling at lower speeds
    • 24.2 CFM Higher airflow to enhance cooling performance
    • Silent operation at 20 dB-A for excellent case cooling
    • RoHS compliance for protecting the environment
    • Recommended for CM 690 / 590 / 690 II. 3 pin Connector. 2000 R.P.M. ± 10% Speed (R.P.M.)
    • Brand: Cooler Master
    • ASIN: B005C31GIA
    • UPC: 884102001314
    • Part No: R4-SPS-20AK-GP
    Lower Bearing Case - Rosewill 120mm Case Fan 4-Pack, Long Life Sleeve Bearing Computer Case Fan ROCF-13001, Ultra Quiet Computer Cooling Fan 4 Pack 120 mm Standard Case Fan
    Rosewill 120mm Case Fan 4-Pack, Long Life Sleeve Bearing Computer Case Fan ROCF-13001, Ultra Quiet Computer Cooling Fan 4 Pack 120 mm Standard Case

    Lower Bearing Case

    Rosewill ROCF-13001 120mm Long Life Sleeve Case Black Case Fan For Computer Cases 4 Pack

    • Fan Size: 120mm
    • Bearing Type: Long Life Sleeve
    • RPM: 1200 +/- 10% RPM
    • Air Flow: 38.2 CFM
    • Noise Level: 22 dBA
    • Power Connector: 3/4 Pin
    • Voltage is DC 12V and the starting voltage is DC 7V
    • Color: Black
    • Brand: Rosewill
    • ASIN: B00KB8CB9O
    • UPC: 898745066425
    • Part No: ROCF-13001
    Lower Bearing Case - ARCTIC F9-92 mm Standard Low Noise Case Fan - Fluid Dynamic Bearing - Innovative Design
    ARCTIC F9-92 mm Standard Low Noise Case Fan - Fluid Dynamic Bearing - Innovative

    Lower Bearing Case

    About ARCTIC ARCTIC is a leading manufacturer of silent PC coolers and components and has initiated and sustainably influenced the trend towards quiet cooling systems. Besides a wide range of CPU and GPU coolers, ARCTIC offers high quality monitor mounts as well as an audio product line. The company, run by founder Magnus Huber, has locations in Germany, Hong Kong and the USA and convinces pc enthusiasts in over 45 countries with innovative and user-friendly products, high quality and fair prices. For more than 15 years ARCTIC stands for comfortable computing, excellent service and personal support. About ARCTIC ARCTIC is a leading manufacturer of silent PC coolers and components and has initiated and sustainably influenced the trend towards quiet cooling systems. Besides a wide range of CPU and GPU coolers, ARCTIC offers high quality monitor mounts as well as an audio product line. The company, run by founder Magnus Huber, has locations in Germany, Hong Kong and the USA and convinces pc enthusiasts in over 45 countries with innovative and user-friendly products, high quality and fair prices. For more than 15 years ARCTIC stands for comfortable computing, excellent service and personal support.

    • INNOVATIVE DESIGN ENABKES QUIET AND EFFICIENT VENTILATION: The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
    • TWO WAY INSTALLATION: Blow warm air out of the case. Draw cool air into your case.
    • LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.
    • 1,800 RPM @12 V / Max. Airflow 43 CFM (73.1 m³/h)
    • Set the fan speed by using a different voltage (5-12V)
    • Color: black/white
    • Brand: ARCTIC
    • ASIN: B002KTZJOQ
    • UPC: 718929133128
    • Part No: AFACO-09000-GBA01
    Lower Bearing Case - Pelican 1650 Case With Foam (Black)
    Pelican 1650 Case With Foam

    Lower Bearing Case

    Pelican Protector Cases are made with Copolymer Polypropylene, using an open cell core and solid wall construction, which is stronger and lighter that the completion. You can tell its a Pelican case by the distinctive "twin-ribbed" top surface. Stainless steel pins are used for hinges and handles. The new Double-Throw latches are much easier to open.

    • Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring.
    • Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out.
    • Pelican's Pick N'Pluck foam lets you customize the interior. Int Volume- 3.08 ft³ (0.087 m³)
    • Stainless steel reinforced padlock protectors and minimum temperature is -40 degree Fahrenheit (-40 degree Celsius) and maximum temperature is 210 degree Fahrenheit (99 degree Celsius)
    • Exterior Dimensions (L x W x D) - 30.75 x 20.5 x 11.62" (78.1 x 52 x 29.5 cm) Interior Dimensions (L x W x D) - 28.5 x 17.37 x 10.5" (72.4 x 44.1 x 26.7 cm).Latch: ABS
    • WEIGHT WITH FOAM: 28.06 pounds / WEIGHT EMPTY: 24.03 pounds / BUOYANCY: 181.00 pounds
    • Retractable extension handle
    • 4 strong polyurethane wheels with stainless steel bearings
    • Watertight, crush-proof and dust-proof
    • Easy open double throw latches
    • Open cell core with solid wall design - strong, light weight
    • Color: Black
    • Brand: Pelican
    • ASIN: B002E6R7NG
    • UPC: 642892820900
    • Part No: 1650-020-110

    Lower Bearing Case X201 Search Results

    Looking for more Lower Bearing Case similar ideas? Try to explore these searches: 4 Piece Embroidered Bedding, Oldsmobile Alero 2 Door Window, and Swirl Pearl Paper.

    Lower Bearing Case - Popular Video Reviews

    Motorcycle Bottom End Rebuild | Part 2 of 3: Crank & Bearings

    Lower Bearing Case

    Everything Needed To Rebuild A Bottom End! https://www.rockymountainatvmc.com/Sales/482/Motorcycle-Bottom-End-Rebuild?utm_source=Youtube&utm_medium=Bottomeendrebuildpart2&utm_content=Description&utm_campaign=Youtubevideos How-to disassemble and rebuild the crank and transmission on a modern 2-st...

    • Likes: 1614
    • View count: 960120
    • Dislikes: 92
    • Comments: 312
    Tags: Motorcycle Rebuild,honda,yamaha,yz,cr,kx,crankshaft,Split Crankcase,Suzuki,Crankshaft Bearing,spl...

    How to remove an outboard bearing carrier

    Lower Bearing Case

    Here's how you remove an outboard bearing carrier without needing special tools. It's possible to rig up your own bearing carrier puller for cheap. This is an Evinrude V6 gear case, but the process is nearly identical for any outboard. REPLACEMENT LOWER UNIT SEAL KIT LINKS BELOW!! READ MORE: BU...

    • Likes: 83
    • View count: 55161
    • Dislikes: 51
    • Comments: 19
    Tags: bearing carrier,bearing carrier removal,lower unit,outboard lower unit removal,pull bearing carri...

    How do I remove my Alpha 1 gen 2 bearing carrier

    Lower Bearing Case

    lease see http://www.sterndrive.info/alpha-one/id306.html for tech support and exploded view drawing. Video includes the following • Removing the Alpha 1 gen 2 bearing carrier • Tools required • Carrier retainer wrench • Bend tab washer • Clean carrier • Removing the cover nut • Heating alph...

    • Likes: 177
    • View count: 69666
    • Dislikes: 36
    • Comments: 22
    Tags: Alpha 1 gen 2 bearing carrier,Alpha one gen 2 repair,Alpha one gen 2 repair tools,Alpha 1 gen 2 r...


    365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.