Compare Prices

Marine Prop Shaft

Marine Prop Shaft - Five Star Marine Outboard Prop Shaft Seal Puller Special Tool Yamaha Mercury Johnson Evinrude
Five Star Marine Outboard Prop Shaft Seal Puller Special Tool Yamaha Mercury Johnson

Marine Prop Shaft

This was one of my favorite special tools and for pulling prop shaft seals it can't get any easier with this tool. It will fit Yamaha Mercury Evinrude Johnson Suzuki motors from various HPs from 40HP-400HP all of the seal drivers may not fit perfect but the seal pullers is what really matters in this kit because pulling a prop shaft seal without damaging the housing and the shaft is the key to making a good seal. These will also work on pulling other seals as well. Always keep in mind a seal is only as good as the surface is rides on so removing the old seals without gouging the surfaces is a must. A trick to cleaning up the shafts is using a socket adapter on a drill and spinning it while you run very fine emery on the shaft this will debur it and give you a fresh surface also pressing the seals in at a different depth is also very helpful if your shafts have wear grooves in them from hard seals. I originally purchased this kit years and years ago from a OMC dealer going out of business and I always found this to be extremely helpful. They stopped producing this kit probably because it worked too well. The original kit wouldn't work on new style lower units V6 Yamaha Evinrude Mercury etc because the propshaft was too big so I redesigned a new puller head to accommodate newer eng...

    • Brand: Five Star Marine
    • ASIN: B07T9FRCX7
    Marine Prop Shaft - Quicksilver / Mercury 2-4-C Marine Lubricant / Grease w/ Teflon 8oz
    Quicksilver / Mercury 2-4-C Marine Lubricant / Grease w/ Teflon

    Marine Prop Shaft

    Quicksilver 2-4-C Marine Lubricant is a high quality multi-purpose lubricant designed to withstand extreme friction in all marine applications.

    • Recommended for greasing propeller shaft splines on all outboards and sterndrives
    • When applied annually, ensures that the prop can be removed when needed
    • Extremely water resistant
    • Won't break down when mixed with water
    • Part #s 92-802859Q 1, 802859A 1
    • Brand: MERCURY
    • ASIN: B001HWPZ6Y
    • UPC: 745061039056
    • Part No: 92802859Q1
    Marine Prop Shaft - SEI Marine Products-Compatible with - Mercury Mariner Force Prop Shaft Seal 26-70081 50-150HP 2 Stroke 4 Stroke 1978+
    SEI Marine Products-Compatible with - Mercury Mariner Force Prop Shaft Seal 26-70081 50-150HP 2 Stroke 4 Stroke

    Marine Prop Shaft

    This prop shaft seal replaces OE#: 26-70081 and fits Mercury, Mariner, and Force outboard lower units with the following applications: 2 stroke inline 3 & 4 cylinder, metric 50-125hp 1987-current, 4 Stroke 50-150hp, and 80-150hp inline 4 & 6 cyl. 2 stroke 1978-1988.

      • Brand: SEI Marine Products
      • ASIN: B00I4ABOPS
      • Part No: 94-205-06
      Marine Prop Shaft - Quicksilver 8M0071838 High Performance Multi-Purpose Extreme NLGI 2 Marine Grease, 8-Ounce Tube
      Quicksilver 8M0071838 High Performance Multi-Purpose Extreme NLGI 2 Marine Grease, 8-Ounce

      Marine Prop Shaft

      2-4-C Marine Lubricant is a high quality marine lubricant specified by Mercury Marine for general lubricant application. Keep contacted moving surfaces properly lubricated for long life and efficient operation. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and power sports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.

      • Handy squeeze tube to keep on board your boat
      • 2‑4‑C Marine Grease with PTFE is a high quality, extremely versatile lithium‑based, NLGI 2 grease that won't break down when mixed with water.
      • Excellent general use lubricant for steering system cables, throttle & shift cables, remote controls, prop shaft and swivel pins
      • For use in trailer wheel bearings
      • Produced by Mercury Marine to our stringent original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser stern drive
      • Color: Unspecified
      • Brand: QuickSilver
      • ASIN: B00BO8A6P6
      • UPC: 745061910553
      • Part No: 8M0071838
      Marine Prop Shaft - SEI Marine Products-Compatible with - OMC Cobra Volvo SX Propshaft Oil Seal 3858303 Sterndrives
      SEI Marine Products-Compatible with - OMC Cobra Volvo SX Propshaft Oil Seal 3858303

      Marine Prop Shaft

      This prop shaft oil seal replaces OE#: 3858303 and fits OMC Cobra lower gearcase Components 1994-1998, and Volvo SX sterndrives.

        • Brand: SEI Marine Products
        • ASIN: B00I4ABDI6
        • Part No: 94-113-06
        Marine Prop Shaft - SEI Marine Products-Compatible with - Evinrude Johnson Prop Shaft Seal 341281 150 175 200 225 HP 1979-Current 1-1/4
        SEI Marine Products-Compatible with - Evinrude Johnson Prop Shaft Seal 341281 150 175 200 225 HP 1979-Current

        Marine Prop Shaft

        This prop shaft seal replaces OE#: 341281 and fits V6 & V4 (large case) 1979-current and V6 counter rotation (1988- current) Evinrude Johnson outboard lower units with the 1-1/4" prop shaft with a single seal design.

          • Brand: SEI Marine Products
          • ASIN: B00I4AC2X6
          • Part No: 94-306-06B
          Marine Prop Shaft - SEI Marine Products-Compatible with - Evinrude Johnson Prop Shaft Seal 0334950 150 175 200 225HP 1991 1992 1993 1-1/4
          SEI Marine Products-Compatible with - Evinrude Johnson Prop Shaft Seal 0334950 150 175 200 225HP 1991 1992 1993

          Marine Prop Shaft

          This prop shaft seal replaces OE#: 0334950 and fits the 800 series V6 Evinrude Johnson outboard lower units with a 1-1/4" prop shaft from 1991-1993.

            • Brand: SEI Marine Products
            • ASIN: B00I4AC0ZG
            • Part No: 94-306-06
            Marine Prop Shaft - Tidal Wake Harmonic Prop Puller for Inboard Boats, Prop Knocker, Propeller Removal Tool, Fits 1
            Tidal Wake Harmonic Prop Puller for Inboard Boats, Prop Knocker, Propeller Removal Tool, Fits 1" or 1 1/8" Propeller Shafts, Handy Storage Tote Bag, Save Time and Money, Easy Do-It-Yourself

            Marine Prop Shaft

            Tidal Wake Harmonic Propeller Puller, Prop Knocker, Prop Removal Tool, Handy Storage Tote Bag, Save Time and Money, Easy Do-It-Yourself DesignDon't be intimidated -- Anyone can remove and replace an inboard boat propeller. It's EASY with Tidal Wake Harmonic Prop Puller. A prop puller works by screwing a puller onto the end of the propeller shaft and then hitting the prop puller with a hammer or mallet. Those strike vibrations on the prop puller cause the prop to back off the shaft. This Harmonic Vibration style puller fits inboard and V-drive ski, surf, & wakeboard boats 1" or 1 1/8" Shaft that is found on all major boat brands, including Mastercraft, Nautique, Moomba, Tige, Malibu, Centurion, Supra, Sanger, Supreme, Axis, Correct Craft, Heyday etc. Tidal Wake Prop Puller is made of Commercial Grade Stainless Steel 416 that's durable with better harmonic properties. It's the same quality stainless steel that's used to make high-performance marine propellers! Brass, bronze, aluminum, and steel prop pullers are made of a softer material that doesn't produce as much harmonic vibration. These vibrations are the power that releases the propeller from the staff. The better the vibration; the better and faster it works. The domed end allows for better contact on the striking surface. SP...

            • Now anyone can remove and replace an INBOARD boat propeller. It's EASY with Tidal Wake Harmonic Prop Puller.
            • A "must-have" in every boater's toolbox! You can replace your own propeller on a trailer or lift and be back to having fun on the water in minutes. No need to trailer to a dealer or marina.
            • Precision crafted, individually machined one-at-a time in USA. It's a high quality, tight tolerance fit on your boat's propeller shaft and threads. Made of Premium grade Stainless Steel 416 that's extra hard and durable. The design and composition of this steel have greater harmonic properties than brass, bronze, aluminum, and common steels. Works on 2 blade, 3 blade, 4 blade, 5 blade (high performance) boat propellers.
            • Fits any make, model or length boat with a 1" or 1 1/8" prop shaft. These are "direct" and "V-drive" boats of any size and include: Mastercraft, Nautique, Moomba, Tige, Malibu, Centurion, Supra, Sanger, Ski Supreme, Axis, Correct Craft, Heyday, Century, Sea Ray, Wellcraft, Pavati, Varatti, and more.
            • No need for clumsy c-clamps that won't work on all style of props! Tidal Wake Prop Puller is as EZ as 1, 2, 3! 1. Screw Prop Puller on propeller shaft. 2. Strike domed top with a hammer or mallet. 3. Watch the Harmonic Vibrations loosen the prop for removal. That's it!
            • Brand: Tidal Wake
            • ASIN: B07MZFFD5Z
            • UPC: 728685703367
            Marine Prop Shaft - SEI Marine Products-Compatible with -Compatible with Mercruiser Propshaft 44-850308 44-824110 Alpha One Gen I & Gen II Drives and Some Outboard Lower Units
            SEI Marine Products-Compatible with -Compatible with Mercruiser Propshaft 44-850308 44-824110 Alpha One Gen I & Gen II Drives and Some Outboard Lower

            Marine Prop Shaft

            This prop shaft replaces OE#: 44-850308 and 44-824110. It fits Mercruiser Alpha One Generation I, Generation II Sterndrives, and Some Outboard Lower units. Please confirm the OEM part number before ordering.

              • Color: Silver
              • Brand: SEI Marine Products
              • ASIN: B00HWAR2AM
              • Part No: 92-102-05
              Marine Prop Shaft - SEI Marine Products-Compatible with - Yamaha Prop Shaft 6J9-45611-01-00 150 175 200 225 HP V6 2.6L 1984-Current
              SEI Marine Products-Compatible with - Yamaha Prop Shaft 6J9-45611-01-00 150 175 200 225 HP V6 2.6L

              Marine Prop Shaft

              This prop shaft replaces OE#: 6J9-45611-01-00 and fits 2.6L V6 150-225 HP standard rotation Yamaha outboard lower units from 1984-current.

                • Brand: SEI Marine Products
                • ASIN: B00I2W4XJW
                • Part No: 92-416-05

                Marine Prop Shaft Y670 Search Results

                Looking for more Marine Prop Shaft similar ideas? Try to explore these searches: Cat Puzzle Box, Sale Low Heel, and 18k Black Clock.

                Marine Prop Shaft - Popular Video Reviews

                Marine Propeller Shaft Work

                Marine Prop Shaft

                A.F. Theriault & Son boatyard offers complete marine propeller repair and maintenance services.

                • Likes: 42
                • View count: 35084
                • Dislikes: 12
                • Comments: 2
                Tags: propeller,Shaft work,marine,boat,ship,repair,boatyard,dockyard,shipyard

                How to Install PSS Propeller Shaft Seal Instructional Video PW Marine Engineers

                Marine Prop Shaft

                P&W Marine Engineers come to you from Hemmant, Brisbane with this instructional video on How To Install A PSS Propeller Shaft Seal correctly. For more answers, please visit our website: www.pwmarineengineers.com.au or give us a call on 3390 7588

                • Likes: 15
                • View count: 13576
                • Dislikes: 9
                • Comments: 3
                Tags: P&W Marine Engineers,Brisbane,Hemmant,Queensland,How To,Instructional,PSS,Propeller,Shaft,Seal

                Removing the propeller shaft from the steel trawler

                Marine Prop Shaft

                Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine In this video I clean the bilge out as best I can and remove the flange off the end of the propeller shaft. Once the key is out I can then slide the prop shaft itself out. The stuffing box / stern gland is a bit stuck but I...

                • Likes: 4416
                • View count: 93282
                • Dislikes: 16
                • Comments: 742
                Tags: stern gland,stuffing box,propeller shaft flange,propeller shaft,bilge clean,clean bilge


                365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.