Compare Prices

Metric Spiral

Metric Spiral - RUIMI Titanium Step Drill Bit Spiral Metric Sizes 3Pcs
RUIMI Titanium Step Drill Bit Spiral Metric Sizes

Metric Spiral

5pcs HSS Spiral Grooved Step Drill Bit 4-12/4-20/4-32 Features :No need for a pilot hole Titanium coated to reduce friction and run cooler Large bit has 3 sided shank.Automatically deburr holes as you drill High speed steel,durable.Widely used to cut holes in a variety of material like steel, wood, thin iron, aluminum alloy, insulation boards, PVC sheet,ect Specification :Color : Golden (as picture shown)Material :High speed steelSurface :Titanium PlatedScop : thin iron plate,aluminum,insulation panels,PVC panels 4mm thickness within the timber.1#"1/4 - 1-3/8" 10 Steps (1/4;3/8;1/2;5/8;3/4;7/8;1;1-1/8;1-1/4;1-3/8)2#"3/16 - 7/8" 12 Steps (3/16;1/4;5/16;3/8;7/16;1/2;9/16;5/8;11/16;3/4;13/16;7/8)3#"1/4 - 3/4" 9 Steps (1/4,5/16,3/8,7/16,1/2,9/16,5/8,11/16,3/4)4#"1/8 - 1/2" 12 Steps (1/8;5/32;7/32;1/4;9/32;5/16;11/32;3/8;13/32;7/16;15/32;1/2)5#"3/16 - 1/2" 6 Steps (3/16;1/4;5/16;3/8;7/16;1/2)Package included : 1 x 1/4-1-3/8 Spiral Grooved Drill 1 x 3/16-7/8 Spiral Grooved Drill 1 x 1/4-3/4 Spiral Grooved Drill1 x 1/8-1/2 Spiral Grooved Drill1 x 3/16-1/2 Spiral Grooved Drill

  • Color: B
  • Brand: RUIMI
  • ASIN: B01IEF4666
  • UPC: 702455082272
Metric Spiral - Driak HSS4241 6-60mm/0.23
Driak HSS4241 6-60mm/0.23"-2.36" Metric Spiral Groove Step Drill Bit Set 13mm/0.51" Shank Cone Drill Bit Hole Cutter for Wood Stainless Steel

Metric Spiral

Features: 100% brand new and high quality Shank Diameter:13mm/0.51" size:6-60mm/0.23"-2.36"(12 steps:6,10,15,20,25,30,35,40,45,50,55,60mm). Little rock, it can carve out a nice aperture without firstly using a center punch Suit for use in hardness under 25 artifacts(Such as iron, steel, PVC panels, wood board ,Do not fit for cutting Stainless steel ) , The plate thickness under 5mm Package Included: 1pcs HSS 4241 Spiral groove step drill

  • Color: Silver
  • Brand: Driak
  • ASIN: B074TDH8H3
  • UPC: 710280453617
Metric Spiral - Migiwata Titanium Coated High Speed Steel 6542 (M2) Metric 1/4
Migiwata Titanium Coated High Speed Steel 6542 (M2) Metric 1/4" Hex Shank Spiral Flute 2-in1 Combination Drill and Tap Bit M3-M10 Set of 6pcs for Tapping Aluminum Plate Wood Copper

Metric Spiral

Overview This set of drill tap bits are made of High Speed Steel 6542 (HSS M2). It's a tungsten-molybdenum high speed steel with a well-balanced composition suitable for a wide variety of applications. Because of its superior properties and relative economy, this set of drill tap bits is a better choice than the lower-priced silver HSS 4341 drill tap bits, if you're mainly tapping on metals. These Migiwata drill taps are a great time saving accessory. Each one is a combination of a twist drill bit and a tap. The point is the same as a twist drill bit, which is self-centering. So you don't have to buy a centering drill bit or a center punch.Now you can drill and tap at the same time in one operation. Just drill until the drill section fully enters the material, then the tapping will start to occur. When it reaches the right depth, reverse the drill to deburr and remove any swarf to complete the job. No tool changes, good alignment and fast cycle times make this a very productive tool. The Migiwata tap drill set also features wide spiral flute, which allow the chips to easily get out of the hole, preventing chip crowding and breakage of tap drill bits. NOTICE: It's highly recommended that the combination drill and tap bits are used on a tapping machine. If you apply an elect...

  • Color: Gold Metric
  • Brand: Migiwata
  • ASIN: B074SC1Q1G
  • UPC: 712492806427
Metric Spiral - 6 Pcs 1/4
6 Pcs 1/4" HSS Spiral Hex Shank Combination Drill Screw Tap Bit Set (M3-M10) with Automatic Spring Loaded Center Punch

Metric Spiral

6PCS 1/4" Hex HSS Composite Spiral Screw Tap Drill Thread M3-M10 with Automatic Center Punch Tool Specification: Material: High-speed steel(HSS 4341) Color: Silver Metric: M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5 Shank: 1/4" (6.35mm) hex shank Size: M3, M4, M5, M6, M8, M10 Center punch material: iron, high-speed steel punch head, brass protective coating Center punch size: 13 cm/ 5 inch in length, 1.27 cm/ 0.5 inch in diameter Usage: Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc. Description : 1.High hardness, rustproof, solid and durable. 2.The advantage is opening, tapping, chamfering. 3.Self-centering point, do not need assistant center drilling or center punching. 4.Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency. Features : 1. Save processing steps and time costs, improve efficiency 2. Spiral groove, within the processing thread, cutting up to exclude, and was curled applied internally threaded through holes Package include: 6 x Compound Tap Drill Bits 1 x Automatic Center Punch Tool Caution: When you use this drill bits, the material temperature will get very high, please add some water or coolant to avoid the material get smoke when using it. 【100% M...

  • Color: Silver
  • Brand: LepoHome
  • ASIN: B07C3HS477
  • UPC: 603977340096
Metric Spiral - Atoplee 5pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Machine Tap Set [5 Sizes]
Atoplee 5pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Machine Tap Set [5

Metric Spiral

Features: Can tap the bottom of the bline hole. Cutting cannot remain Can easy eating into the bottom of the hole Good machinability

  • Color: Silver
  • Brand: ATOPLEE
  • ASIN: B00V7XL6RU
Metric Spiral - Drill Warehouse 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set
Drill Warehouse 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps

Metric Spiral

About Drill Warehouse: Drill Warehouse has always devoted itself to providing drill products with excellent quality for the end-users. 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set Features: 100% Brand New and High Quantity. High hardness, fast cutting, wear high temperature. Spiral groove is conducive to remove crumbs, not easily broken tap. Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and sticky materials processing. Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum, magnesium alloy; anti-bonding strength 600 ~ 900N / mm 2 the high-carbon steel, alloy steel, bronze, etc. Specifications: Material: HSS Surface treatment: Ti Type Size: M3: 3mm*0.5mm M4: 4mm*0.7mm M5: 5mm*0.8mm M6: 6mm*1mm M8: 8mm*1.25 mm Package Included: 5 x Titanium screw tap

  • Color: Gold
  • Brand: Drill Warehouse
  • ASIN: B01JSAFB92
  • UPC: 712994005847
Metric Spiral - HHIP 1011-7752 M2-.4 D3 Tin 35 Degree Metric Spiral Flute Tap, Din371
HHIP 1011-7752 M2-.4 D3 Tin 35 Degree Metric Spiral Flute Tap,

Metric Spiral

35 degrees Spiral flute. Metric DIN 371. High speed steel. Titanium coated. Thread Ground.

  • Brand: HHIP
  • ASIN: B00N3ZNWOK
  • UPC: 769053001869
Metric Spiral - RUIMI Titanium Step Drill Bit Spiral Metric Sizes 3Pcs (Step Bits 3/16'' - 3/4
RUIMI Titanium Step Drill Bit Spiral Metric Sizes 3Pcs (Step Bits 3/16'' -

Metric Spiral

RUIMI Titanium Step Drill Bit, High Speed Steel HSS Quick Change 1/4" Shank Total 31 Sizes 3-Piece Set Tool for Carbon Steel, Sheet Iron, Insulation Boards, PVC Boards, Planks, and Wood Features: === Drill 19 hole sizes.=== This compact set replaces 31 individual drill bits.=== Titanium nitride coating for cooler running.=== Quick-change 1/4" hex shank.=== High Speed Steel for long service life.=== They also help to enlarge existing holes.=== The two flute design tips made the penetration faster without chipping. === Application: suitable for below 25 hardness of the work piece, such as carbon steel, sheet iron, insulation boards, PVC boards, planks, and wood thickness below 5MM. Specifications:Material: High speed steelSizes of the 3 Step Drill Bits: 15 Step bits from 4-32mm 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32mm 9 Step bits from 4-20mm 4 6 8 10 12 14 16 18 20mm 10 Step bits from 4-12mm 4 5 6 7 8 9 10 11 12mm Package included:3 x Drill Bit RUIMI Warranty Description:If this item was damaged within 30 days,Please send E-mail to us (add items damaged photo)Plan A :We will return all money to you Plan B:we will resend new one for you,meanwhile we pay the return shipping fee

  • Color: Step Bits 3/16'' - 3/4"
  • Brand: RUIMI
  • ASIN: B01FTLH99O
Metric Spiral - 3pc HSS Titanium Coated Spiral Flute Step Drill Bit ,4-12/20/32mm
3pc HSS Titanium Coated Spiral Flute Step Drill Bit

Metric Spiral

Suitable for use in workpiece which less than 25 ° , such as carbon steel, iron plate Drill round holes in most metals, plastic, wood...etc Material: Titanium Nitride Coating, HSS (4241)with heat treated shank :1/4 Hexagonal pattern surface treatment:titanize Package Included: 3pcs Stepped drill

  • Color: sliver
  • Brand: Preamer
  • ASIN: B015KDG1EU
  • UPC: 745950874416

Metric Spiral N61 Search Results

Looking for more Metric Spiral similar ideas? Try to explore these searches: Gold Medal Caramel, Awareness Ribbon Cookie Cutter, and Food Mixer.

Metric Spiral - Popular Video Reviews



365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.