Compare Prices

Motor Control Board

Motor Control Board - Whirlpool WPW10374126 Motor Control Board
Whirlpool WPW10374126 Motor Control

Motor Control Board

This is a genuine replacement part. The model number and name for the following item is: Whirlpool WPW10374126 Motor Control Board

  • Motor control board WPW10374126 monitors and controls the drive motor speeds and directions.
  • This part is compatible with models including; WFW88HEAW0,MHW7000AG0,WFW86HEBC0,WFW96HEAW0,WFL98HEBU0,WFW95HEXW1,WFW95HEXW0,MHW4200BW0,WFW95HEXW2,MHW7000AW0,WFW70HEBW0,WFW94HEXW0,MHW6000XG0,WFW94HEXW1,WFW94HEXW2,MHW6000XG2,WFW80HEBC0,MHW6000XG1,MHW4200BG0,BNQ11DCANA0,7MWFW95HEYL0,MHW6000AG0,MHW9000YR0,WFW95HEXR0,WFW95HEXR2,WFW95HEXR1,WFW94HEAW0,MHW6000AW0,WFW94HEXL0,WFW94HEXL1,WFW94HEXL2,MHW7000XG2,MHW7000XG1,MHW7000XG0,WFW97HEXL3,MHW9000YW0,WFW97HEXL2,WFW97HEXL1,WFW97HEXL0,BNQ11CVANA0
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Maytag,Whirlpool
  • This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including; W10374126,W10245123
  • Brand: Whirlpool
  • ASIN: B075FS378M
  • UPC: 840383138262
  • Part No: WPW10374126
Motor Control Board - Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For

Motor Control Board

Specification: Chip: L298N Logic voltage: 5V Logic current 0mA-36mA Storage Temperature: -20 ℃ to ℃ to +135 Operating mode: H-bridge driver (dual) Drive voltage: 5V-35V Drive current: 2A (MAX single bridge) Maximum power: 25W Dimensions: 43x43x27mm Package include: 1x L298N Module Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN4 control OUT3 OUT4

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
  • High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
  • Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
  • Brand: Qunqi
  • ASIN: B014KMHSW6
  • UPC: 783325944715
  • Part No: MK-050
Motor Control Board - SB New Motorshield for Raspberry Pi 3,2,1 and Zero This Expansion Board can Control up to 4 Motors or 2 Stepper Motor, 2 IR sensors and a Single ultrasonic Sensor.
SB New Motorshield for Raspberry Pi 3,2,1 and Zero This Expansion Board can Control up to 4 Motors or 2 Stepper Motor, 2 IR sensors and a Single ultrasonic

Motor Control Board

The new Motorshield for the Raspberry Pi Designed to help you get your Raspberry Pi mobile as part of your robot project this board lets you control up to 4 DC motors or 2 stepper motor. It includes direction indicator LEDs to help you configure your motor output and connectors designed for plugging in IR and ultrasonic sensor modules to tell your robot about its environment. This makes it a perfect component for object detection/avoidance, wall-following or light-following robots. The board is designed specifically for the Raspberry Pi 2/3 Model B. Based around the L293D IC it is capable of driving 4 DC motors or 2 stepper motors. The L293D is a dual full bridge driver that can output up to 1Amp per bridge with a supply voltage up to 24V. The source code is available on GitHub. Check on this link https://github.com/sbcshop/MotorShield

  • Dual H-Bridge IC L293D. Motor Input Supply Range: 6V - 24V
  • Single Motor Output Current: 600mA or 1A peak per channel
  • On board Arrow Indicator for motor direction Indication,
  • 2 IR sensor connectors with 3.3V level output protection. Control 2 stepper motor
  • 1 Ultrasonic sensor connector with 3.3V level output protection. Download code from https://github.com/sbcshop/MotorShield
  • Brand: sb components
  • ASIN: B01MQ2MZDV
  • Part No: SKU08001
Motor Control Board - DAOKI 5 PCS L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560
DAOKI 5 PCS L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power UNO MEGA R3

Motor Control Board

L298N is a kind of high voltage,high current motor driver chip produced by ST company.Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V),large output current(instantaneous peak current up to 3A,continuous working current 2A) and 25W of rated power.Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor,relay coil and so on.Using standard logic level signal control,it has two enable control ends.It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage.The chip can connects to external detecting resistor to give the variations to the control circuit.Using L298N chip to drive the motor,this chip can drive a stepping motor or four phase stepping motor,and two DC motors as well.Description:1.Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability,low calorific value and strong anti-interference ability.2.This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip,please use an external 5V logic supply when using more t...

  • The signal is shown in the figure
  • The connecting method is shown inbelow figure after enable ENA ENB
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.
  • Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled
  • Package Included - 5 pcs L298N Motor Driver Controller Board Modules.
  • Color: L298N
  • Brand: DAOKI
  • ASIN: B00XAGRQTO
  • UPC: 695259095961
  • Part No: FBA_TS-US-078-SNL
Motor Control Board - Whirlpool Part Number W10374126: CNTRL-ELEC
Whirlpool Part Number W10374126:

Motor Control Board

Whirlpool Washer Motor Control Board PART# W10374126 FITS WFW95HEXW2 FITS MANY MODELS PLEASE CHECK WITH US FOR FIT

    • Brand: Whirlpool
    • ASIN: B008DJLV26
    • UPC: 702024682063
    • Part No: W10374126
    Motor Control Board - Whirlpool Corp W10756692 Washer Motor Control Board
    Whirlpool Corp W10756692 Washer Motor Control

    Motor Control Board

    Whirlpool Washer Electronic Control Board

      • Brand: Whirlpool
      • ASIN: B00QZPIZ2Y
      • Part No: W10756692
      Motor Control Board - WGCD 5 PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Module for Arduino
      WGCD 5 PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Module for

      Motor Control Board

      Specification: Name: Dual H bridge motor driver module Working mode: H bridge driver (dual) Main control chip: L298N Logic voltage: 5 v The driving voltage: 5 v - 35 v Logic current : 0mA-36mA Drive current: 2 a (MAX single bridge) Storage temperature: - 20 °C to + 135 °C Max power: 25 w Weight: 30 g Size: 43 * 43 * 27 mm L298N motor controller board module, ideal for Arduino smart car power UNO MEGA R3 Mega2560 Package included: 5 pcs L298N Motor Controller Board Module

      • L298N main driving chip, high drive ability, low calorific value, strong anti-interference capability.
      • Dual H bridge DC stepper module, more stable and higher work efficiency.
      • Size: 43 * 43 * 27 mm/1.69 * 1.49 * 1.06in
      • With built-in 78M05 to supply power, to avoid the damage of voltage regulator chip, when the driving voltage is greater than 12V, please use the external 5V logic power supply.
      • Package: 5 pcs L298N motor controller board module
      • Brand: WGCD
      • ASIN: B06X9D1PR9
      • UPC: 602914545525
      Motor Control Board - Whirlpool 8182706 Control Unit
      Whirlpool 8182706 Control

      Motor Control Board

      This is a genuine replacement part. The model number and name for the following item is: Whirlpool 8182706 Control Unit.

      • Whirlpool item
      • Manufacturer model # 8182706
      • This is a genuine replacement part
      • Brand: Whirlpool
      • ASIN: B00DZU8MB6
      • UPC: 799493736410
      • Part No: 8182706
      Motor Control Board - DC Brush Motor Controller, DROK 16A Dual Channel H Bridge Motor Driver Brushed Board DC 5V-36V Motor Drive Control Smart Car PWM Speed Regulator
      DC Brush Motor Controller, DROK 16A Dual Channel H Bridge Motor Driver Brushed Board DC 5V-36V Motor Drive Control Smart Car PWM Speed

      Motor Control Board

      DROK 12v 24v 36v DC Brush Motor Controller Parameters: Output channel: 2-way Working voltage: 5-36V 2 channel max current: 16A Each channel rated current: 8A Each channel output rated power: 96W (12V input); 288W (36V input). Control signal voltage:3-5V Each channel control signal current: 2-10MA Support PWM frequency range: 2-20K Support PWM duty ratio range: 0-99% Min. PWM effective pulse width: 10US Working temperature:-10℃-80℃   Notes: 1. We recommend adding the fuses, as without fuses on the power supply circuit of the motherboard. The reversed connection will cause some of the chip permanent damage. 2. In the normal operation, the motor output has no over-current protection. Please do not man-made short-circuit, because the module power current is large. Once short-circuit, has the possibility of burning circuit and tube. Please use low current low-voltage testing in the first wiring test; then connect the larger current and voltage. Due to the bare board module sold, please attention wiring thread insulation and prohibited strong voltage touch onboard parts. 3. Do not connect the drive motor which has obviously inconsistent voltage, current, power, to avoid the unreasonable damage. 4. When switching between positive and negative rotation, it is better to save buffer ...

      • DROK DC brush motor controller operating voltage range is DC 5V-36V, rated current is 16A, rated current of each channel is 8A, rated output power of each channel is 96W(12v input), 288W(36v input).
      • Special Point: the motor driver is easy programming and easy control, can control forward and reverse rotation, with strong drive and fast break.
      • Material: our motor control module uses complete two half-bridge driver chip + low internal resistance of N-channel MOSFET, MOSFET switching losses is to a minimum, which improve power utilization than integrated power chip program.
      • Caution: in the normal operation, the motor output has no over-current protection. Please do not man-made short-circuit, because the module power current is large. Once short-circuit, has the possibility of burning circuit and tube. Please use low current low-voltage testing in the first wiring test; then connect the larger current and voltage. Due to the bare board module sold, please attention wiring thread insulation and prohibited strong voltage touch on board parts.
      • Note: it is recommended adding the fuses, as without fuses on the power supply circuit of the motherboard. The reversed connection will cause some of the chip permanent damage.
      • Brand: DROK
      • ASIN: B078TFLD7Q
      • Part No: 2001712008
      Motor Control Board - DROK DC 6.5V-27V 7A Dual H-Bridge PWM Motor Driver
      DROK DC 6.5V-27V 7A Dual H-Bridge PWM Motor

      Motor Control Board

      Parameters: 1. Power supply voltage 6.5V-27V, the power cannot be reversed or over 27V, or may burn the module, it is recommended connecting in series 15A fuse in the power input. 2. Dual motor interface, each rated output current 7A, peak current 50A, the motor interface cannot short-circuit, it is recommended connecting in series 15A fuse. 3. The enable signal and forward and reverse control signal control voltage 3-6.5V. 4. Enable signal terminal (ENA) input PWM can regulate speed, PWM frequency range 0-10KHZ, PWM minimum pulse width 10us. 5. Product dimension: 55x55x16mm  6. Installation hole diameter: 3mm, noted to prevent short circuit when install the reverse side, you can add insulation pad or copper column to raise the circuit board Parameters matched: Motors with rated voltage 24V, identification of rated power 115W or below, and motors with identification of rated current 7A can full work for a long time. Note:  1. Drive power cannot be reversed, it is recommended connecting in series 15A fuse in the power interface, the voltage should be between 6.5 - 27V. If over voltage, it may burn the drive module if power on. 2. It is recommended that the rated output current of the power supply be more than 2 times, in case the power supply voltage cannot reach the required ...

      • DROK DC motor driver input voltage range is DC 6.5V-27V, can be input DC 12V or 24V, rated output current of each port is 7A, total output power is 160W.
      • STRONG DRIVE: the motor controller board adopts dual H bridge, can drive two DC motors at the same time.
      • FORWARD and REVSERSELY ROTATE: the IN1, IN2/IN3, IN4 port can control forward or reverse motor rotation.
      • PWM SPEED CONTROL: enable signal terminal (ENA) input PWM can regulate speed, PWM frequency range 0-10KHZ.
      • UNDER VOLTAGE PROTECTION: the motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module.
      • Brand: DROK
      • ASIN: B06XGD5SCB
      • Part No: 200206

      Motor Control Board G132 Search Results

      Looking for more Motor Control Board similar ideas? Try to explore these searches: Antique Silver Jewelry Findings, 2000 Hot Bodies, and Rawlings Coolflo Batting Helmet.

      Motor Control Board - Popular Video Reviews

      Washer Motor Control Board (part #134743500) - How To Replace

      Motor Control Board

      Buy the new Washer Motor Control Board 134743500 http://www.appliancepartspros.com/frigidaire-control-board-134743500-ap3891780.html Follow these simple step-by-step instructions to replace the Motor Control Board 134743500 on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, Sears, and ...

      • Likes: 112
      • View count: 22873
      • Dislikes: 8
      • Comments: 16
      Tags:

      BLDC Hover Board Motor Controller | Part 1| Tutorial # 28

      Motor Control Board

      Part #2 https://www.youtube.com/watch?v=IrWBQBgoqf0 Alexa Taking out the trash https://www.youtube.com/edit?o=U&video_id=sFJE_PsUlm8 5V-36V 350W DC Brushless Motor Controller BLDC PWM Driver Board https://goo.gl/qnQ32U Specification : Operating voltage: DC 12V-36V Operating Current: less tha...

      • Likes: 321
      • View count: 33346
      • Dislikes: 21
      • Comments: 60
      Tags: BLDC motor Controller,hoverboard wheel,E-bike,Home Automation,IOT,Brushless DC Motor controller,A...

      How To Make DC Motor Speed Controller

      Motor Control Board

      DIY Homemade Make DC Motor Speed Controller simple at home Parts that you need: - Circuit boards PCB, principles: https://goo.gl/y1ZoH0 - 1 IRFZ44 + Aluminum heat sink - 1 NE555, 3v Led - 1 Capacitor 16v 1000uf - 3 * Resistor 1K ohm - 3 * Diode 1N4148 - 1 * Resistor 10K ohm - 1 Potentiometer 50k ...

      • Likes: 13447
      • View count: 1278809
      • Dislikes: 659
      • Comments: 870
      Tags: Make DC Motor Speed Controller,DC Motor Speed Controller,Motor Speed Controller,DIY Motor Speed C...


      365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.