Compare Prices

Npt Hole

Npt Hole - Liquid Tight Strain Relief Cord Grip - 3/4 Inch NPT Thread, w/4 Round Holes for USE-2 #12 & #10 Wire, Heyco (Pack of 2)
Liquid Tight Strain Relief Cord Grip - 3/4 Inch NPT Thread, w/4 Round Holes for USE-2 #12 & #10 Wire, Heyco (Pack of

Npt Hole

Pack of 2 strain reliefs. Use the 3/4" threaded connectors to provide a waterproof entrance or exit for wiring on PV module junction boxes and outdoor combiner boxes. Offers flexibility to use from 1 to 4 of the available holes (seal unused holes with sealant). Designed for solar rooftop installations. Provides a watertight seal for PV module output leads to inverters. Secures input PV leads from solar panel array strings to fuse holder hookup within solar combiner boxes. Eliminates the need for combiner box in residential rooftop solar applications when appropriate threaded adapter is used. Generous wrenching flats for ease of assembly. No disassembly required for installation. UV resistant nylon construction with integrated sealing gland resists salt water, weak acids, weak alkalis, alcohol, ether, esters, ketones, and mineral, animal and vegetable oils. UL Listed. IP68 rated. Suitable for use in NEMA 4, 4X, and 6 applications. 3/4" steel locknut included.

    • Color: Black
    • Brand: Heyco
    • ASIN: B071S7G2K6
    • Part No: M3234GAG-2
    Npt Hole - Drill America 3/4
    Drill America 3/4"-14 NPT Pipe Tap, Carbon Steel, DWTPT

    Npt Hole

    Drill America DWTPT series Qualtech carbon steel pipe tap is designed to clean and/or re-thread damaged or jam pipe threads. It is appropriate for threading a wide variety of materials both ferrous and non-ferrous. The nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All pipe taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round with square end shank. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.

    • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
    • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
    • Round shank with square end
    • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
    • Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction
    • Brand: Drill America
    • ASIN: B00FXKW4F6
    • UPC: 887861076302
    • Part No: DWTPT3/4
    Npt Hole - RAM MOUNTS (RAM-112-1 VHF Antenna Mount with 1/2 Inch Npt Female Hole and 2.5 Inch Round Base
    RAM MOUNTS (RAM-112-1 VHF Antenna Mount with 1/2 Inch Npt Female Hole and 2.5 Inch Round

    Npt Hole

    RAM stands for Round-A-Mount and was introduced in 1995. Far and away the most innovative product line of its kind, RAM continues to evolve into one of the most sought after accessories for electronics. RAM products have quickly become an essential mounting component for a wide variety of applications including rugged vehicle, industrial, military and defense, material handling as well as any application requiring a robust mounting solution.

    • RAM offers a diverse product line which is protected by over 100 issued patents with more than 60 patents pending
    • RAM ball and socket mounts feature a design revolving around an elastomeric rubber ball
    • Incorporating a non-slip feature as well as shock and vibration dampening, our often imitated but never duplicated mounting solutions are truly one of a kind and enhance every application they are used in
    • Utilizing the finest assembly hardware, durable composites, steel, stainless steel, rubber, and aluminum, our mounting bases and complete kits are manufactured in the USA to perform above expectations and remain cost effective.
    • Brand: RAM MOUNTS
    • ASIN: B00JUWFUMW
    • UPC: 793442011214
    • Part No: RAM-112-1
    Npt Hole - Dixon 60405 Polypropylene Pipe and Welding Fitting, Bulkhead, 2
    Dixon 60405 Polypropylene Pipe and Welding Fitting, Bulkhead, 2" NPT Female, 3" Hole

    Npt Hole

    This Dixon 604 series bulkhead fitting is made of polypropylene, has female NPT threads, and is suitable for use in storage tanks. This bulkhead fitting has female National Pipe Taper (NPT) threaded tubes for connecting to male NPT threads through a tank wall. It is made of glass-reinforced polypropylene for strength and resistance to chemicals. The gaskets (included) are made of EPDM (ethylene propylene diene monomer) for resistance to weathering, electricity, oils, water, steam, and some solvents. This bulkhead fitting is suitable for use on storage tanks made of polypropylene, fiberglass, or steel.Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.Dixon Valve & Coupling Company manufactures pipe and hose fittings and accessor...

    • Bulkhead to connect two tubes through a tank wall
    • Female NPT threads to connect to a male threaded tube or pipe
    • Glass reinforced polypropylene for strength and chemical resistance
    • EPDM gaskets for resistance to weathering, electricity, oils, water, steam and some solvents
    • Brand: Dixon Valve & Coupling
    • ASIN: B00835T8L6
    • UPC: 697464379546
    • Part No: 60405
    Npt Hole - Lifegard Aquatics 3 inch Cap w/ NPT Hole for AF-94
    Lifegard Aquatics 3 inch Cap w/ NPT Hole for

    Npt Hole

    3" Cap with NPT Hole for Lifegard Aquatics Inline Mechanical Filters

      • Brand: Lifegard Aquatics
      • ASIN: B000O3EN06
      • UPC: 788379306953
      • Part No: 788379306953
      Npt Hole - RAM MOUNTS (RAM-B-232-90 2.5
      RAM MOUNTS (RAM-B-232-90 2.5" Round Base with 90 Degrees 1/4" Npt

      Npt Hole

      RAM stands for Round-A-Mount and was introduced in 1995. Far and away the most innovative product line of its kind, RAM continues to evolve into one of the most sought after accessories for electronics. RAM products have quickly become an essential mounting component for a wide variety of applications including rugged vehicle, industrial, military and defense, material handling as well as any application requiring a robust mounting solution.

      • RAM offers a diverse product line which is protected by over 100 issued patents with more than 60 patents pending
      • RAM ball and socket mounts feature a design revolving around an elastomeric rubber ball
      • Incorporating a non-slip feature as well as shock and vibration dampening, our often imitated but never duplicated mounting solutions are truly one of a kind and enhance every application they are used in
      • Utilizing the finest assembly hardware, durable composites, steel, stainless steel, rubber, and aluminum, our mounting bases and complete kits are manufactured in the USA to perform above expectations and remain cost effective.
      • Brand: RAM MOUNTS
      • ASIN: B009GLVRRE
      • UPC: 547157373125
      • Part No: RAM-B-232-90
      Npt Hole - Metalwork Black Alloy Steel Hex Head Socket Pipe Plug Assortment Kits, 16 Pcs, 1/8
      Metalwork Black Alloy Steel Hex Head Socket Pipe Plug Assortment Kits, 16 Pcs,

      Npt Hole

      The Hex Head Pipe Plug is made of nickel plated iron, designed with internal hex head. This plug is great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc.

      • Include : 1/8"(4 pcs), 1/4"(4 pcs), 3/8"(4 pcs), 1/2"(2 pcs), 3/4"(2 pcs)
      • Made from alloy steel for strength and corrosion resistance;
      • Male National Pipe Taper (NPT) threads for use with female threaded pipes
      • Used for closing and terminating the end of a pipe.
      • Great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block
      • Brand: Metalwork
      • ASIN: B07FKZ729K
      Npt Hole - Sewer Jetter Kit 1/8
      Sewer Jetter Kit 1/8" NPT x 50' Hose & 4.0 Orifice Button Nose Nozzle 4000

      Npt Hole

      Schieffer 1/8in. x 50ft. 4800 PSI Thermoplastic Sewer Jetter Hose & MTM Hydro 4.0 Orifice Button Nose NozzleKit Includes:Schieffer 1/8" x 50' Sewer Jetter HoseMTM 1/8" Button Nose Sewer Jetter Nozzle 4.0 OrificeSewer Jetter Hose 4800 PSI 1/8" x 50' Black Thermoplastic Weather Oil & Abrasion ResistantThermoplastic sewer jetter hose made in the USA for all types of medium and high-pressure jetting applications. Schieffer Sewer Jetter hose uses a reinforcement construction composed of one extra strong layer of textile braid. Schieffer uses a single pass with a twenty-four carrier braider vs two passes with a sixteen carrier braider like most of the competition.Hose ConstructionInner Tube: Thermoplastic polyester tubeReinforcement: One layer of 1/8" high tenacity polyester textile braid that is chemically bondedCover: Black thermoplastic polyurethane that is oil, weather, ozone, and abrasion resistantTemperature Range: -40°F / +160°FSpecs:Length: 50'Size: DN 03 - Dash -02Connections: 1/8" MPT (solid) + 1/4" MPT BushingHose I.D: .16" - Hose O.D: .37"Working Pressure: 4800 PSI - 331 Bar - Proof Pressure: 6000 PSI - 414 Bar - Burst Pressure: 12000 PSI - 828 BarBend Radius (MIN): 1"MTM Hydro Button Nose 1/8" 4.0 Orifice Sewer Jetter Nozzle1 front jet at 0° that clears blockages - 3 re...

      • Schieffer hose uses a reinforcement construction composed of one extra strong layer of textile braid
      • One layer of 1/8" high tenacity polyester textile braid that is chemically bonded
      • Black thermoplastic polyurethane that is oil, weather, ozone, and abrasion resistant
      • Pin test each crimp to confirm proper internal crimp
      • ISO 9001 Certified and Proudly Made in the USA
      • Brand: Schieffer Co.
      • ASIN: B00MV3D542
      • Part No: SCH-MTM-SJK-02-050-RTBN-040
      Npt Hole - RAM Single Ball ARM with 1/2
      RAM Single Ball ARM with 1/2"" NPT

      Npt Hole

      The RAM-200-1 includes a single socket that will accommodate 1.5"" balls and a 1/2"" NPT Female thread. This part will connect to 1/2"" NPT Male threads, including the

        • Brand: RAM MOUNTS
        • ASIN: B008RC5XA0
        • UPC: 793442020018
        • Part No: RAM-200-1
        Npt Hole - Union Butterfield 1544(NPT) High-Speed Steel Pipe Tap, Nitride Finish, Round Shank With Square End, 1/4
        Union Butterfield 1544(NPT) High-Speed Steel Pipe Tap, Nitride Finish, Round Shank With Square End, 1/4"-18 Thread

        Npt Hole

        The Union Butterfield 1544(NPT) nitride finish high-speed steel pipe tap has straight flutes and a round shank with a square end, and is used to create NPT (National Pipe Taper) right-hand threads in a range of materials, with strength in cast iron, high-carbon steel, and alloy steel. NPT thread is an ANSI-standard thread configuration designed to be used with a sealant to create a leak-free tapered pipe joint. The straight flutes are suitable for threading through holes (extending through the workpiece) and blind or bottoming holes (with only one opening). Nitride finish offers increased durability and abrasion resistance, and retards the tendency of softer materials to load or cling onto the tool; these characteristics make it a good choice for abrasive materials like cast iron. Right-hand threads are designed to tighten when a head or nut is rotated clockwise (the most common threading direction). High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. The round shank with square end helps to minimize rotation in the tool holder. This tool can be used in machines, such as drill presses or lathes, or with hand tools such as tap wrenches. In the Union Butterfield 1544(NPT) series, taps with nominal diameters of 1...

        • Pipe tap cuts threads in pipes and pipe fittings
        • NPT (National Pipe Taper) thread design for tapered pipe threading
        • Nitride finish for increased hardness and wear-resistance
        • Straight flutes to cut threads in through holes and blind holes
        • Round shank with square end helps to minimize rotation in the tool holder
        • Brand: Union Butterfield
        • ASIN: B003JY63A0
        • UPC: 698464020490
        • Part No: 15441/4X18

        Npt Hole W442 Search Results

        Looking for more Npt Hole similar ideas? Try to explore these searches: Outdoor Table Top Torch, Boys Navy Plaid Shirt, and Woven Chocolate.

        Npt Hole - Popular Video Reviews

        Working with NPT Fittings in Homebuilt Aircraft

        Npt Hole

        This short video describes the details of working with NPT fittings and pipes while plumbing brake and fuel systems in experimental aircraft.

        • Likes: 226
        • View count: 30041
        • Dislikes: 8
        • Comments: 21
        Tags: Tip of the Week,HomebuiltHELP,NPT,fuel system,homebuilt aircraft,experimental aircraft

        Internal NPT Thread in SolidWorks - TUTORIAL

        Npt Hole

        Tutorial on how to make internal NPT in SolidWorks. National Pipe Taper threads are precisely modeled in SolidWorks 3D CAD.

        • Likes: 259
        • View count: 53499
        • Dislikes: 6
        • Comments: 38
        Tags: Interanl NPT Threads,Internal national pipe taper model,internal NPT 3D CAD,internal NPT in Solid...

        Fun with USA Made Pipe Taps - Irwin-Hanson 1921ZR

        Npt Hole

        Irwin-Hanson Homepage: http://www.irwin.com/tools/brands/hanson Irwin 1921 Tap Set: http://www.irwin.com/tools/taps-dies-sets/6pc-taper-pipe-tap-set-hcs Interested in A Career In Welding? Click Here: http://www.georgiatradeschool.com/ Markal Industrial Markers: http://www.markal.com/ ChuckE20...

        • Likes: 1090
        • View count: 60924
        • Dislikes: 54
        • Comments: 112
        Tags: tap,die,set,machine,machining,steel,brass,pipe,thread,threading,cutting,irwin,hanson,made in usa


        365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.