Compare Prices

Overhead Valve Engine

Overhead Valve Engine - SUNROAD Valve Spring Remover Installer Car Engine Overhead OHV OHC Compressor Tool Set
SUNROAD Valve Spring Remover Installer Car Engine Overhead OHV OHC Compressor Tool

Overhead Valve Engine

Specifications: 1. Color: Black 2. Dimensions: (20.27 x 3.54 x 9.25)" / (51.5 x 9 x 23.5)cm (L x W x H) 3. Weight: 122.4oz / 3.47kg 4. Applicable for OHV & OHC petrol or diesel engines on the following: Audi (4 and 5 Cylinder), Nissan, Toyota, Chrysler, Honda, Mazda, Mitsubishi, Porsche (924 & 928), Volvo, VW (4, 5, 6 cylinder), Ford, Chevrolet, GMC, Saturn and others Package Includes: 1 x Valve Spring Compressor set

  • Forged Steel Construction, for Installation and Removal of the Valve Spring, Without Removal of Cylinder Head From the Engine
  • The Multi-Point Adjustable Base of This tool Bolts Securely to the Head While the Adjustable Lever Mechanism Pivots From the Bar Thus Compressing the Spring
  • Quick Removal and Installation of the Spring Retaining Keepers is Then Easily Accomplished the Large Openings on Both Sides of the Compression Tube
  • Complete With 1 Iron Pole, 1 "Easy Grip" Handle, 5 Removal Kit Sets, and a Storage Case
  • Applicable for OHV & OHC Petrol Or Diesel Engines on the Following: Audi (4 and 5 Cylinder), Nissan, toyota, Chrysler, Honda, Mazda, Mitsubishi, Porsche (924 & 928), Volvo, VW (4, 5, 6 Cylinder), Ford, Chevrolet, GMC, Saturn and Others
  • Brand: Qp-SUNROAD
  • ASIN: B0741XZJDB
  • UPC: 734010838710
  • Part No: SpringCompressor003
Overhead Valve Engine - Predator 6.5 HP 212cc OHV Horizontal Shaft Gas Engine - NOT Certified for California; Fuel Shut Off and Recoil Start
Predator 6.5 HP 212cc OHV Horizontal Shaft Gas Engine - NOT Certified for California; Fuel Shut Off and Recoil

Overhead Valve Engine

Gas-saving overhead valves for cooler, cleaner performance and longer life. Horizontal shaft makes this an ideal all-purpose replacement engine. ■Upgraded engineering and construction for improved service life 6.5 HP Displacement: 212 cc, 4 stroke, 8.5:1 compression ratio Shaft size: 3/4" / 19.1 mm diameter x 2.43" / 61.7 mm L, end tapped 5/16-24 with 3/16" / 4.76 mm keyway 0.9 gallon / 3.6 L fuel capacity Height: 14" Width: 12-1/2" (from end of crank to starter recoil) Width: 14-1/2" (from air filter to fuel tank) Mounting base pattern: 162mm L x 75.5mm W - 80.5mm W (6.40" L x 2.95" W - 3.17" W ) Weight: 38.00 lbs.

  • Durable cast iron cylinder withstands wear and abuse
  • User-friendly controls for easy starting and operation
  • Recoil start
  • Fuel shut off for safe transport
  • Ball bearing support shaft for long life
  • Color: Black
  • Brand: Predator Engines
  • ASIN: B005U31ORU
  • UPC: 792363681209
  • Part No: 68120
Overhead Valve Engine - ARES 70370 | Valve Spring Compressor | Compresses Valve Springs on Overhead Valve Engines | Direct Action Compressor Lever Gives Better Visibility During Valve Spring Compression
ARES 70370 | Valve Spring Compressor | Compresses Valve Springs on Overhead Valve Engines | Direct Action Compressor Lever Gives Better Visibility During Valve Spring

Overhead Valve Engine

Easily Compress Valve Springs On Overhead Valve Engines The ARES Valve Spring Compressor lets you quickly and easily compress valve springs, even in hard to reach places! Designed with a direct action compressor lever, this compressor gives better visibility of valve spring retainers located in difficult or hard to reach areas, and it includes two valve spring adapters, which fit valve spring retainers up to 1 inch (25mm) and 1-3/16 inches (30mm), so you can work on a variety of sizes.  Features:  Includes: 1 pc. valve spring compressor and 2 pc. Valve spring adapters Adapter sizes fit valve spring retainers up to 1 inch (25mm) and 1-3/16 inches (30mm) Jaw opens between 1-3/8 inches to 5-5/8 inches (35mm to 142mm) Throat clearance of 5-7/8 inches (150mm) Direct action compression lever for better visibility of valve spring retainers in difficult or hard to reach areas Designed to compress valve springs on overhead valve engines

  • ITEM SPECIFICATIONS: This valve spring compressor tool is designed to compress valve springs on overhead valve engines. It includes two valve spring adapters, which fit valve spring retainers up to 1 inch (25mm) and 1-3/16 inches (30mm). It has a jaw opening of 1-3/8 inches to 5-5/8 inches (35mm to 142mm) and a throat clearance of 5-7/8 inches (150mm).
  • DESIGN CONSIDERATIONS: This Valve Spring Compressor is designed with a direct action compressor lever which gives better visibility of valve spring retainers located in difficult or hard to reach areas.
  • WHY YOU NEED IT: If you have to compress valve springs on overhead valve engines then this valve spring compressor is for you! Our design enables you to quickly and easily compress those springs; even in hard to reach places!
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Valve Spring Compressor, simply contact customer service for troubleshooting help, parts, replacement, or refund.
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we're proud to help this great organization.
  • Brand: ARES
  • ASIN: B078YFGQFW
  • UPC: 818765028203
  • Part No: Valve Spring Compressor
Overhead Valve Engine - CAPVSCK Car Engine Overhead Valve Spring Remover Installer Compressor Tool Kit Ohv Ohc by Ctt
CAPVSCK Car Engine Overhead Valve Spring Remover Installer Compressor Tool Kit Ohv Ohc by

Overhead Valve Engine

Forged steel construction, *** applicable for OHV & OHC petrol or diesel engines of the following cars: Audi (4 & 5 Cylinder), BMW, chevrolet, Chrysler, Ford, GM, Honda, Lincoln, Mazda, mitsubishi, Nissan, porsche (924 & 928), saturn, Toyota, Volvo, VW (4, 5, 6 Cylinder), and many other vehicles

  • Forged steel construction, for installation and removal of the valve spring, without removal of cylinder head from the engine.
  • Applicable for OHV & OHC Gas or diesel engines
  • Fits most Domestic & import cars.
  • Brand: Cal Hawk Tools
  • ASIN: B00AU5LISS
  • UPC: 091044391278
  • Part No: CAPVSCK
Overhead Valve Engine - Jecr Valve Stem Seal Pliers - Long Stems Seals Removal Plier Tool for Car - Overhead Engine Control Vavle Stem Seal Pliers Removal Puller - Universal Camshaft Remover Tools
Jecr Valve Stem Seal Pliers - Long Stems Seals Removal Plier Tool for Car - Overhead Engine Control Vavle Stem Seal Pliers Removal Puller - Universal Camshaft Remover

Overhead Valve Engine

Valve Stem Seal Pliers easily removes most valve stem seals Pliers nose has serrations in the tip for improved grasp on seals The inside grooves on the tips of this Plier allows the firm grip of both O.E. and aftermarket seals Gripping serration provides easy grasp in both original equipment & aftermarket seals regardless of the configuration Features hardened heat-treated steel and heavy-duty plastic handles for maxiumum durability. Whether tuning up your '68 Corvette or changing the oil on a John Deere tractor, Jecr can supply you with the tools needed to do the job. Overall product length is 10 inches / 25 centimeters Heavy duty, longer than average pliers for ultimate reach.

  • Helps you quickly remove stem seals in most engines
  • Guaranteed improved grip on seals with its tip end serrations
  • Works with OEM and aftermarket seals regardless of their configuration
  • Easily removes valve stem seals on overhead camshaft engines
  • Extra long neck designed to reach into confined area of the seal to grip it for easy removal
  • Brand: Jecr
  • ASIN: B07DFDKVH4
  • Part No: JB0114
Overhead Valve Engine - OTC 4573 Universal Overhead Valve Spring Compressor
OTC 4573 Universal Overhead Valve Spring

Overhead Valve Engine

OTC's No. 4573 Universal Overhead Valve Spring Compressor is a great option for compressing valve springs - facilitating valve spring removal or valve stem seal replacement on many Cars, Vans, & Light Trucks. Ideal for use on installed cylinder heads, especially in vehicles with tight underhood clearances, but can be used for bench work as well. Spring loaded jaws easily grip and compress valve springs. Legs are designed with a built-in offset to compensate for spring wind - keeping tool vertical and stable during use. Includes two spring adapters. Fits valve spring retainers up to 1-13/16 inch diameter. 1-3/8 to 5-5/8 inch jaw opening. 5-7/8 inch throat clearance. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

  • OTC's Universal Overhead Valve Spring Compressor is a great option for compressing valve springs - facilitating valve spring removal or valve stem seal replacement on many Cars, Vans, & Light Trucks
  • Ideal for use on installed cylinder heads, especially in vehicles with tight underhood clearances, but can be used for bench work as well
  • Spring loaded jaws easily grip and compress valve springs
  • Legs designed with a built-in offset to compensate for spring wind - keeping tool vertical and stable during use
  • Includes two spring adapters; fits valve spring retainers up to 1-13/16 inch diameter; 1-3/8 to 5-5/8 inch jaw opening; 5-7/8 inch throat clearance
  • Brand: OTC
  • ASIN: B000F5HUUI
  • UPC: 069060286410
  • Part No: 4573
Overhead Valve Engine - TC-Motor Aftermarket Air Filter For Briggs & Stratton 613022 650821 698413 794421 5079 4213 21A902 21A907 21A977 21B902 21B906 21B907 21B972 21B976 21B977 For 10 HP Overhead Valve Engines (10)
TC-Motor Aftermarket Air Filter For Briggs & Stratton 613022 650821 698413 794421 5079 4213 21A902 21A907 21A977 21B902 21B906 21B907 21B972 21B976 21B977 For 10 HP Overhead Valve Engines

Overhead Valve Engine

Product Description: Conditon: New Quality: Guaranteed Good Quality. Promise: Always Responsible Customer Service. Quantity: Including All Of The Parts In The Listing Pictures. Fitment: High Quality Aftermarket Air Filter, Replaces OEM Part #: Briggs & Stratton 613022, 650821, 697152, 698413, 797007, 794421, 5079, 4213 Ariens 21544020 Fits Models: BRIGGS & STRATTON 21A902, 21A907, 21A977, 21B902, 21B906, 21B907, 21B972, 21B976 And 21B977; For 10 HP Overhead Valve Engines High Quality Aftermarket Pre-Filter, Replaces OEM Part #: Briggs & Stratton 697292, 4212 Fits Models: BRIGGS & STRATTON 21A902, 21A907, 21A977, 21B902, 21B906, 21B907, 21B972, 21B976 And 21B977; For 10 HP Overhead Valve Engines.

  • Fitment: Aftermarket Air Filter For Briggs & Stratton 613022 650821 698413 794421 5079 4213 21A902 21A907 21A977 21B902 21B906 21B907 21B972 21B976 21B977 For 10 HP Overhead Valve Engines Ariens 21544020
  • Package: Safety Package To Keep The Product In Good Condition During The Shipping
  • Shipping: Item Shipped From China & Shipping Will Take About 8-15 Business Days
  • Reminder/Note: To Ensure You Purchase The Correct Product, Please Read The Description Carefully. Thanks For Your Attention.
  • Welcome To Contact With Us Before Or After Your Purchase. Our Warm & Responsible Customer Service Always Be Here For You.
  • Brand: TC-Motor
  • ASIN: B07C5T68N9
  • UPC: 799899923902
  • Part No: TC-Motor
Overhead Valve Engine - EWK Overhead Valve Keeper Remover Installer Engine Tool Kit Set 5/16''-3/8'' and 4.5mm-7.5mm
EWK Overhead Valve Keeper Remover Installer Engine Tool Kit Set 5/16''-3/8'' and

Overhead Valve Engine

Quickly removes and installs valve keepers on most overhead valve engines. Make Valve Component Disassembly And Reassembly Fast And Easy. Push or tap tool with a hammer to remove valve keepers. Magnet in tool body captures keepers for quick removal and valve disassembly. To install, load keepers into the installer. Can be used on the car or a work bench. Works on valve stems from 5/16" to 3/8" 

  • Quickly removes and installs valve keepers on most overhead valve engines.
  • Make Valve Component Disassembly And Reassembly Fast And Easy.
  • Push or tap tool with a hammer to remove valve keepers.
  • Magnet in tool body captures keepers for quick removal and valve disassembly.
  • To install, load keepers into the installer.
  • Brand: EWK
  • ASIN: B01C717CT6
  • UPC: 700587513312
  • Part No: EB0214
Overhead Valve Engine - OTC 4842 Heavy Duty Valve Spring Compressor
OTC 4842 Heavy Duty Valve Spring

Overhead Valve Engine

This compressor is used to compress valve springs for removal or installation. The heavy duty C-frame has a 9 inches opening and a 5 inches throat. Kit includes 16 millimeters, 19 millimeters, 23 millimeters, 25 millimeters, and 30 millimeters valve spring retainer adapters.

  • Used to compress valve springs for removal or installation
  • Heavy duty C-frame
  • 9 inches opening and 5 inches throat
  • Includes 16, 19, 23, 25 and 30 millimeters valve spring retainer adapters
  • One year limited warranty
  • Color: Regular
  • Brand: OTC
  • ASIN: B008PW52OY
  • UPC: 731413563560
  • Part No: 4842
Overhead Valve Engine - Cocoarm Valve Spring Remover,Car Engine Overhead Valve Spring Remover Installer Compressor Tool Set For OHV, OHC
Cocoarm Valve Spring Remover,Car Engine Overhead Valve Spring Remover Installer Compressor Tool Set For OHV,

Overhead Valve Engine

Description: This is a kit of engine overhead valve spring remover and installer compressor tool including 1 iron pole, 1 handle, 5 removal kit sets and so on. You can assemble these parts in a complete compressor tool or dismantle it and put all of these parts in a blow mold case for easy transportation and storage. It is very practical and economical. Features: This kit can complete the quick removal and install of spring retaining keepers. It removes and installs the valve spring with the cylinder head still on the engine, or removed. It is applicable for OHV & OHC gas or diesel engines, which is very practical and functional, such as for Audi, for Nissan, for Honda, for Kreisler, for Mitsubishi, for Mazda, for Volve, for Porsche, for Volkswagen, for Toyota, ect. Multi-point adjustable base of this tool bolts securely to the head. Featured with alloy steel construction in black finish, it is solid for strong strength and long durability. Comes with 1 iron pole, 1 handle, 5 removal kit sets, and all of these are packaged in a red plastic case. With simple design, it is easy to assemble and dismantle under the manual enclosed. Specifications: Material: Alloy Steel Main Color: Black Blow Mold Case Size: 48 x 28.5 x 7cm/18.9'' x 11.2'' x 2.76'' Pole Length...

  • This kit can quickly complete the removal and installing of spring retaining keepers. It removes and installs the valve spring without removing the cylinder head on the engine.
  • It's applicable for OHV & OHC gas or diesel engines,such as for Audi, for Nissan, for Honda, for Kreisler, for Mitsubishi, for Mazda, for Volve, for Porsche, for Volkswagen, for Toyota,ect.
  • It's made of alloy steel construction in black finish, it is solid for strong strength and long durability.
  • Pack of 7pcs(1 iron pole, 1 handle, 5 removal kit sets),8 Screws and 8 Gaskets.All of these are packaged in a red plastic case.
  • It will be shipped from USA warehouse, you can receive the goods within 4-7days
  • Brand: Cocoarm
  • ASIN: B07K79782V
  • UPC: 791380256964
  • Part No: pgmk4trg8u

Overhead Valve Engine L508 Search Results

Looking for more Overhead Valve Engine similar ideas? Try to explore these searches: Fringe Kimono, Usb Combination Modem Router, and Style Kids Panel Bed.

Overhead Valve Engine - Popular Video Reviews

5 Reasons Pushrod Engines Still Exist

Overhead Valve Engine

Why Chevy And Dodge Are Still Making Pushrod V8 Engines. EE Shirts! - http://bit.ly/2BHsiuo Recommended Books & Car Products - http://amzn.to/2BrekJm Subscribe for new videos every Wednesday! - https://goo.gl/VZstk7 Pushrod engines typically use two valves per cylinder, and as a result this eng...

  • Likes: 11811
  • View count: 499068
  • Dislikes: 259
  • Comments: 1897
Tags: v8 engine,chevy,dodge,chevrolet,dodge hemi,ram hemi,chevrolet v8,chevy ls,ls3,v8,pushrod engine,d...

Overhead Valve Engine Teardown

Overhead Valve Engine

Taking apart a Briggs and Stratton Overhead Valve Engine.

  • Likes: 105
  • View count: 18208
  • Dislikes: 6
  • Comments: 13
Tags: overhead engine teardown,overhead valve,small engine,idosp,small engine repair

Why Are 4 Valves Better Than 2? DOHC vs OHV

Overhead Valve Engine

Why are 4 valves per cylinder better than 2 valves per cylinder? Is DOHC better than OHV? 4 valves per cylinder allows for more airflow than 2 valves per cylinder, as there is larger open area when the valves are open. Having a configuration with DOHC and four valves per cylinder means better air...

  • Likes: 8124
  • View count: 572088
  • Dislikes: 181
  • Comments: 1555
Tags: Overhead Camshaft (Valvetrain Configuration),Overhead Valve (Valvetrain Configuration),4 valve vs...


365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.