Compare Prices

Quarter Molding

Quarter Molding - FLEXTRIM # WM105: 3/4
FLEXTRIM # WM105: 3/4" x 3/4" Flexible Quarter Round Molding - 8' feet

Quarter Molding

Conventional woodworking tools can be used with this material. Use gel based adhesive continuously on the backside and nails to secure moulding in place until adhesive bonds. Remember - do not use staples to fasten material, keep nails to a minimum (no closer than 6 inches between nails), and do not nail closer than 3/8 inch from edge of moulding. Flex Trim is stable and will not absorb moisture and is ideal for humid environments. It is not affected by heat or cold and can withstand extreme environments. ALWAYS lay out the material to let it relax back into its original shape; this is a good time to double-check molding style and application. NEVER pre-finish the material prior to installation. The material may flex during installation and cause fractures in the finish. ALWAYS make certain that the surface you are applying the material to is flat and smooth. Flexible molding will follow any irregularities in the surface. NEVER use staples or nails with large heads. Keep nails to a minimum and away from edges to avoid "bumps" at the edge. ALWAYS use a construction adhesive in conjunction with (or in lieu of) nails or screws. This will ensure a quick and easy application and a cleaner finished look. Clean with acetone or 91% rubbing alcohol (any solvent that evaporates quickly) If...

  • Color: Light Tan
  • Brand: FLEXTRIM
  • ASIN: B07QBD5X1W
Quarter Molding - FLEXTRIM #WM108: 1/2
FLEXTRIM #WM108: 1/2" x 1/2" Flexible Quarter Round - 8 feet Long (96"

Quarter Molding

Conventional woodworking tools can be used with this material. Always install moulding in a relaxed position. Use construction or panel adhesive continuously on the backside and nails to secure moulding in place until adhesive bonds. Remember - do not use staples to fasten material, keep nails to a minimum (no closer than 6 inches between nails), and do not nail closer than 3/8 inch from edge of moulding. Flex Trim is stable and will not absorb moisture and is ideal for humid environments. It is not affected by heat or cold and can withstand extreme environments. ALWAYS lay out the material to let it relax back into its original shape; this is a good time to double-check molding style and application. NEVER pre-finish the material prior to installation. The material may flex during installation and cause fractures in the finish. ALWAYS make certain that the surface you are applying the material to is flat and smooth. Flexible molding will follow any irregularities in the surface. NEVER use staples or nails with large heads. Keep nails to a minimum and away from edges to avoid "bumps" at the edge. ALWAYS use a construction adhesive in conjunction with (or in lieu of) nails or screws. This will ensure a quick and easy application and a cleaner finished look.

  • Color: Light Tan
  • Brand: FLEXTRIM
  • ASIN: B07RF49H12
Quarter Molding - Oak - Quarter Round Real Hardwood Molding, 48
Oak - Quarter Round Real Hardwood Molding, 48"

Quarter Molding

Note: Available in Groove Type, Staple Type (flexible plastic) and Wood, each in a variety of colors. Refer to product title and image to ensure you order the correct item. Staple Type approximate size: 1/4" x 1/4" x 25' length. Groove Type requires 1/8" kerf. 25' length. Quarter Round Real Hardwood Moldings are sold in 48" lengths. 1/4" High x 1/4"wide. Minimum order is $5.00.

  • Brand: Rockler
  • ASIN: B001HN1G0W
  • Part No: 1/4" X 48" OAK
Quarter Molding - Flex Trim flexible molding Item # WM105 (CM105): 3/4
Flex Trim flexible molding Item # WM105 (CM105): 3/4" x 3/4" flexible quarter round - 12' feet

Quarter Molding

Conventional woodworking tools can be used with this material. Always install moulding in a relaxed position. Use construction or panel adhesive continuously on the backside and nails to secure moulding in place until adhesive bonds. Remember - do not use staples to fasten material, keep nails to a minimum (no closer than 6 inches between nails), and do not nail closer than 3/8 inch from edge of moulding. Flex Trim is stable and will not absorb moisture and is ideal for humid environments. It is not affected by heat or cold and can withstand extreme environments. ALWAYS lay out the material to let it relax back into its original shape; this is a good time to double-check molding style and application. NEVER pre-finish the material prior to installation. The material may flex during installation and cause fractures in the finish. ALWAYS make certain that the surface you are applying the material to is flat and smooth. Flexible molding will follow any irregularities in the surface. NEVER use staples or nails with large heads. Keep nails to a minimum and away from edges to avoid "bumps" at the edge. ALWAYS use a construction adhesive in conjunction with (or in lieu of) nails or screws. This will ensure a quick and easy application and a cleaner finished look.

  • Color: Light Tan
  • Brand: Flex Trim CarterFlex
  • ASIN: B0765BD9HJ
  • UPC: 745308001396
  • Part No: 90140
Quarter Molding - Flexible Moulding - Flexible Quarter Round Moulding - WM105-3/4
Flexible Moulding - Flexible Quarter Round Moulding - WM105-3/4" X 3/4" - 8' Straight - Flexible

Quarter Molding

Duraflex Flexible Moulding:Moisture & Insect proof.Bends like a belt around your waist.Withstands extreme heat and cold temperatures without warping, cracking or deteriorating. Seamless construction without lamination defects. For interior and exterior use. Install using standard woodworking equipment - cut, sand, shape and finish like wood. Material is Beige in color. For applications with a minimum radius of 6" or greater.FasteningPolyurethane construction adhesive behind and at miter joints in addition to pneumatic pin nailing is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Always install Flexible Moulding first is a relaxed non-tensile state. Nails should be kept to a minimum and 3/8" from any edge. For best results, we recommend using Loctite PL Premium Polyurethane Construction Adhesive.  Cutting Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on Stain grade material is only on the surface and will be eliminated if sanded.  PaintingPrimer coats are not recommended. Use water based Acrylic Latex Paint. When using Alkyd Enamels an exterior primer such as Kilz is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before ...

  • Brand: Duraflex by Resinart
  • ASIN: B006R99T0U
  • UPC: 735090069483
  • Part No: FBA_TWM105SS8/0
Quarter Molding - Multi Angle Miter Shear Cutter Hand Tools 45 Degree To 120 Degree (Handle Color - Vary), Including Spare Blade
Multi Angle Miter Shear Cutter Hand Tools 45 Degree To 120 Degree (Handle Color - Vary), Including Spare

Quarter Molding

Unbreakable blade and blade that can be sharpened Superior quality. Red Oak Tools Molding cutter. This hand held unit is great for cutting all kinds of moldings in its capacity range. The Miter Cutter is an essential tool for any worker who needs to cut 45- 120-degree miters in small moldings on a regular basis. Similar to a garden shear, the built-in fence allows you to cut miter joints quickly, easily, and with accuracy.

  • Brand: Red Oak Tools
  • ASIN: B07BMZD25T
  • UPC: 792773678257
  • Part No: 43237-2
Quarter Molding - Flexible Moulding - Flexible Base Shoe Moulding - WM126-1/2
Flexible Moulding - Flexible Base Shoe Moulding - WM126-1/2" X 3/4" - 8' Length - Flexible

Quarter Molding

Duraflex Flexible Moulding:Moisture & Insect proof.Bends like a belt around your waist.Withstands extreme heat and cold temperatures without warping, cracking or deteriorating. Seamless construction without lamination defects. For interior and exterior use. Install using standard woodworking equipment - cut, sand, shape and finish like wood. Material is Beige in color. For applications with a minimum radius of 6" or greater.FasteningPolyurethane construction adhesive behind and at miter joints in addition to pneumatic pin nailing is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Always install Flexible Moulding first is a relaxed non-tensile state. Nails should be kept to a minimum and 3/8" from any edge. For best results, we recommend using Loctite PL Premium Polyurethane Construction Adhesive.  Cutting Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on Stain grade material is only on the surface and will be eliminated if sanded.  PaintingPrimer coats are not recommended. Use water based Acrylic Latex Paint. When using Alkyd Enamels an exterior primer such as Kilz is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before ...

  • Brand: Duraflex by Resinart
  • ASIN: B006R98WTO
  • UPC: 608729286363
  • Part No: TWM126SS8/0
Quarter Molding - Multi Angle Miter Cutter | Hand Shear Multipurpose Tool | Cuts 45 to 135 Degrees | Stainless Steel with Rubber Handle & Safety Lock | Also Called Trim, Chamfer & Quarter Round Cutters by Carpenters
Multi Angle Miter Cutter | Hand Shear Multipurpose Tool | Cuts 45 to 135 Degrees | Stainless Steel with Rubber Handle & Safety Lock | Also Called Trim, Chamfer &

Quarter Molding

Have you ever had problems measuring your material only to realize it is slightly off and have to redo the entire thing? Us too this is why Merhoff & Larkin Miter Cutter's are perfect for any project! Besides savings you loads of time while working here is more value our shear scissors will give to you! ERGONOMIC HANDLE - For extended uses our cutter has a rubber grip providing great traction as well as comfort to help support the hand when applying pressure. The grip allows for limiting fatigued hands and ease of use. GREAT VALUE - Our prices are not only better than our competitors but you also get an even better premium quality product with a sharp blade and safety lock. You'll be able to use our cutters time and time again as a reliable tool for your next project DEPENDABILITY - With these Multi Angle Cutters you can always count on quality performance and consistency. No matter the project you're working on these multipurpose cutters will be well suited to give precise measurements and a clean cut on wood, pvc, trim, base, vinyl, trunking, box, shoe molding and so much more. SAVES TIME - Instead of having to measure remeasure and then measure again only to find that your marks are slightly off our tool allows you the convenience of having the protractor right in front of you...

  • Brand: Merhoff & Larkin
  • ASIN: B07H3DDLGG
  • UPC: 689856041025
Quarter Molding - CalFlor MD20035 Quarter Round ¾
CalFlor MD20035 Quarter Round ¾" x ¾" x 94" Floor Base Molding for Wood, Laminate, WPC, LVT & Vinyl, 5 Pack, Natural Oak, 5

Quarter Molding

Cal-Flor quarter round floor molding is used in many flooring applications. Commonly used along walls, sliding glass windows, fireplaces, kitchen islands, cabinets and to conceal expansion spaces. Can be used in conjunction with baseboard to give a classic layered look, just like base shoe molding. Made up of mdf core and decorative paper surface material, each piece comes prefinished. No sanding, priming, painting, or staining needed! comes in 94” lengths and are ¾”x ¾” wide. Durable construction and made in America.

  • Color: Natural Oak
  • Brand: CalFlor
  • ASIN: B072MSLHJP
  • UPC: 050462200357
  • Part No: MD20035
Quarter Molding - Carrara White Italian (Bianco Carrara) Marble 1 X 12 Quarter-Round Trim Molding, Polished
Carrara White Italian (Bianco Carrara) Marble 1 X 12 Quarter-Round Trim Molding,

Quarter Molding

Perfect for use in any interior / exterior (residential or commercial) project (e.g. kitchen backsplash, bathroom shower floor or wall, pool surround, spa, fountain, barbecue, etc.). Please note that natural stone does vary in pattern and color, so each piece will be unique, which is part of what makes natural stone such a beautiful and interesting material. Samples are highly recommended for a better assessment of the current batch of this product before commitment to a larger purchase. (Even though we do everything we can to truly represent the overall colors / shades of the current batch of the product with our product photos, due to various monitors and settings, it may not be directly possible to view the exact shading / coloring characteristics of the material entirely on your screen. Therefore, current actual samples should be obtained and approved before committing to a larger order).

  • Brand: Oracle Tile & Stone
  • ASIN: B01N26CU6S
  • Part No: CRR_QTRND_P

Quarter Molding C132 Search Results

Looking for more Quarter Molding similar ideas? Try to explore these searches: Action Pilot, Gymboree Turtleneck, and Horse Sm Pony.

Quarter Molding - Popular Video Reviews

How To Cut Quarter Rounds For A 90 Degree Angle

Quarter Molding

Counter Rounds: http://amzn.to/2AevqJU Laminate Flooring: http://amzn.to/2AeqyEO Peel & Stick Flooring: http://amzn.to/2yjO41j My Gear: Mic: http://amzn.to/2x5dcII Canon S110: http://amzn.to/2kPsWN6 Filmed On Canon 60D: http://amzn.to/1OiJZMw DJI Mavic: http://amzn.to/2v4Icex Screen Recorder: ht...

  • Likes: 897
  • View count: 199044
  • Dislikes: 148
  • Comments: 51
Tags: how to cut a 90 degree quarter round,how to cut a quarter round,quarter round,how to cut a quarte...

How to Install Quarter Round

Quarter Molding

Just a quick Video to show you how you hide the seems of the laminate flooring that meets up to the base board.

  • Likes: 463
  • View count: 285637
  • Dislikes: 277
  • Comments: 69
Tags: Florring,laminate,Laminate,DIY,Do it yourself,easy install,how to,instal,easy,do it yourself,do-i...

Installing quarter round molding

Quarter Molding

How to install baseboards, quarter round molding, shoe molding, etc. WITHOUT a nail gun! Nail set tool: https://amzn.to/2LyxZvp Sealant: https://amzn.to/2wt9eey Read more on my blog: https://www.cabanastateofmind.com/how-to-install-quarter-round-molding-with-a-hammer-and-nails/

  • Likes: 57
  • View count: 6675
  • Dislikes: 7
  • Comments: 7
Tags: home improvement,install molding,home repair,home decor,home renovation,quarter round molding,DIY...


365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.