Compare Prices

Reducing Elbow Fitting

Reducing Elbow Fitting - 2 PIECES XFITTING 1
2 PIECES XFITTING 1" PEX X 3/4" PEX REDUCING ELBOW BRASS CRIMP FITTINGS - LEAD FREE BRASS, FULL

Reducing Elbow Fitting

(PLEASE VISIT OUR AMAZON STORE FOR MORE PRODUCTS) XFITTING will give our customers 30 days to try out ours confident products, if some how you don't like it you can mail it back to us we will refund your money back with no question to ask, NO RESTOCKING FEES and even pay for your return shipping fees.

  • Brand: PEX 1" X 3/4" XFITTING
  • ASIN: B07BGWMFX4
  • UPC: 046661061349
Reducing Elbow Fitting - Anderson Metals Brass Pipe Fitting, Forged Reducing Street Elbow, 1/4
Anderson Metals Brass Pipe Fitting, Forged Reducing Street Elbow, 1/4" Female Pipe x 1/8" Male

Reducing Elbow Fitting

The Anderson Metals 90-degree reducing street elbow pipe fitting is made of forged brass and has a female National Pipe Taper (NPT) threaded connection and a male NPT threaded connection. This 90-degree reducing street elbow fitting connects two pipes with different diameters, one with a male end and the other with a female end, at a 90-degree angle to change the direction of flow between pipes. It has female NPT threads on one end and male NPT threads on the other for connecting a male and a female threaded pipe. The NPT threads create a tighter seal than straight threads. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability, and it is forged to increase the material's strength and resistance to mechanical shock and vibration. The operating temperatures for this fitting range from -53 to 121 degrees C (-65 to 250 degrees F). This fitting meets American Society for Testing and Materials (ASTM) B584 and American Society of Mechanical Engineers (ASME)/American National Standards Institute (ANSI) B16 specifications for quality assurance.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consid...

  • Brand: Anderson Metals
  • ASIN: B006PKKZL8
  • UPC: 719852118343
Reducing Elbow Fitting - SharkBite U274LFA 3/4-Inch by 1/2-Inch SharkBite Lead Free Reducing Elbow
SharkBite U274LFA 3/4-Inch by 1/2-Inch SharkBite Lead Free Reducing

Reducing Elbow Fitting

The Sharkbite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead. Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems.

  • Color: Brass
  • Brand: SharkBite
  • ASIN: B00310ZOXY
  • UPC: 697285465862
Reducing Elbow Fitting - Brass Pipe Fitting, Class 125, 90 Degree Reducing Elbow, 3/8
Brass Pipe Fitting, Class 125, 90 Degree Reducing Elbow, 3/8" x 1/4" NPT

Reducing Elbow Fitting

This 90-degree reducing elbow is a class 125 brass pipe fitting with female National Pipe Taper (NPT) threads on both ends to connect and change the flow direction between two male pipes of different sizes. The elbow has NPT threads on both ends for creating a tighter seal than straight threads. It is made of brass, which has greater corrosion resistance than steel, and the material’s relative softness allows for easy installation. The pressure ratings for this class 125 elbow are 125 pounds per square inch (psi) for steam and 200 psi for water, oil, and gas (WOG), and the fitting meets standards ANSI B 1.20.1 and ANSI B 16.15 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

  • Brand: Merit Brass
  • ASIN: B004ZLBR0C
Reducing Elbow Fitting - Everflow Supplies BMRL1002 1
Everflow Supplies BMRL1002 1" x 1/2" Reducing Malleable Iron Elbow for High Pressures with Female Thread Fittings and Black

Reducing Elbow Fitting

This is an ever flow reducing elbow, from their pipe fittings line, with 90 Degree bend and with 1 inch x 1/2 inch female threaded ends. The Part is made of Malleable iron, with a black finish, and is designed for applications where the pressure does not exceed 150 lb. The Part is produced in an ISO 9001:2000 qualified production environment and it has been pressure tested in the factory. The fitting complies to the ansi/asme B16.3 and B16.14 and to the ASTM a-197 standards. It is approved by UL/ULC and FM.

  • Brand: Everflow Supplies
  • ASIN: B016Y8JO1M
  • UPC: 804595930397
Reducing Elbow Fitting - EDGE INDUSTRIAL FORGED 90º MALE REDUCING ELBOW 1/2
EDGE INDUSTRIAL FORGED 90º MALE REDUCING ELBOW 1/2" MNPT x 3/8" MNPT FUEL/AIR/WATER/OIL/GAS

Reducing Elbow Fitting

1/2" MNPT x 3/8" MNPT Brass Forged 90º Male Reducing Elbow. Used for a variety of applications, not limited to grease, fuels, refrigeration, water, oil gas, and hydraulic systems. Working pressure of 1200 PSI. Temperature range of -65°F to 250°F (-53°C to 121°C). Meets the standards of ASA, ASME and SAE. Not deemed lead free. Not for use with potable water. Please Note: NPT Thread size is NOT determined by its outside thread diameter in inches. Please review our attached NPT sizing chart to cross reference NPT thread size to linear inches

  • Brand: EDGE INDUSTRIAL
  • ASIN: B07DKRRS2R
  • UPC: 691023897021
Reducing Elbow Fitting - 5 PIECES 3/4
5 PIECES 3/4" PEX X 1/2" PEX REDUCING ELBOW BRASS CRIMP FITTINGS - LEAD FREE (We have all size please check it out at our Amazon store front. Thank

Reducing Elbow Fitting

(PLEASE VISIT OUR AMAZON STORE FOR MORE PRODUCTS. THANK YOU) XFITTING will give our customers 30 days to try out ours confident products, if some how you don't like it you can mail it back to us we will refund your money back with no question to ask, NO RESTOCKING FEES and even pay for your return shipping fees.

  • Brand: PEX 1/2" X 3/4" XFITTING
  • ASIN: B07BGSSFWG
  • UPC: 046661061301
Reducing Elbow Fitting - Anderson Metals Brass Pipe Fitting, 90 Degree Reducing Elbow, 3/4
Anderson Metals Brass Pipe Fitting, 90 Degree Reducing Elbow, 3/4" Female x 1/2"

Reducing Elbow Fitting

The Anderson Metals 90-degree reducing elbow pipe fitting is made of brass and has female National Pipe Taper (NPT) threaded connections. This 90-degree reducing elbow fitting connects two pipes with different diameters at a 90-degree angle to change the direction of flow between pipes. It has female NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The operating temperatures for this fitting range from -53 to 121 degrees C (-65 to 250 degrees F). This fitting meets American Society for Testing and Materials (ASTM) B584 and American Society of Mechanical Engineers (ASME)/American National Standards Institute (ANSI) B16 specifications for quality assurance.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness)...

  • Brand: Anderson Metals
  • ASIN: B000BOBWYS
  • UPC: 719852918226
Reducing Elbow Fitting - Everflow Supplies BMRL1120 Black Malleable Reducing Elbow Fitting for High Pressures with Female Threaded Connections, 1-1/2
Everflow Supplies BMRL1120 Black Malleable Reducing Elbow Fitting for High Pressures with Female Threaded Connections, 1-1/2" x

Reducing Elbow Fitting

This is an everflow reducing elbow, with 90 degree bend and with 1-1/2 inch x 1/2 inch female threaded ends. In particular, the part is made of malleable iron, with a Black finish and is designed for applications where the pressure does not exceed 150 LB. Furthermore, the part is produced in an iso 9001:2000 qualified production ENVIRONMENT and it has been pressure tested in the factory. In addition, the fitting complies to the ansi/asme B16.3 and B16.14 and to the astm a-197 standards and it is approved by UL/ulc and fm.

  • Brand: Everflow Supplies
  • ASIN: B01BTY8AGQ
  • UPC: 804595930441

Reducing Elbow Fitting Q410 Search Results

Looking for more Reducing Elbow Fitting similar ideas? Try to explore these searches: Kawasaki Wheel, Vintage Russ Plush, and Neo Fitted Baseball Cap.

Reducing Elbow Fitting - Popular Video Reviews



365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.