Compare Prices

Roof Pipe Support

Roof Pipe Support - ROOFTOP SLEEPER SUPPORT PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC
ROOFTOP SLEEPER SUPPORT PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled

Roof Pipe Support

The Rooftop Sleeper Support RSS-3 is a rooftop support block or stand that can be cut to desired length using various saws. Used to support rooftop water lines, gas lines, electrical conduit, condensate lines, and other types of rooftop plumbing. Pipes can be affixed to the support block using pipe guides, clamps, tab tape and other types of user-provided hardware. Ultimate loading of the rooftop pipe support should not exceed 50 lbs. per 6" of support. Consult the roofing manufacturer for maximum allowable roof load. This rooftop pipe support is made of extruded, 100% recycled PVC. Each unit is 3' long x 4.875" wide x 3.5" tall and can be cut to any desired length. Space the rooftop pipe supports in accordance with local code or specification requirement for the component being support. When using as a pipe support, manufacturer recommended spacing is 10 feet on center, not to exceed max load per roofing manufacturer. Continual maintenance is not required, but semi-annual inspection is recommended to check for proper pipe stand position, pipe alignment, weight distribution and installation. Improper installation may cause pipe stand damage or failure and damage to the pipe or roof surface. Suggested minimum length is 6" (152.4 mm) to provide adequate stability.

  • Can Be Cut to Desired Lengths | Suggested minimum length is 6" (152.4 mm) to provide adequate stability.
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included)
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable
  • Color: White
  • Brand: ROOFTOP SLEEPER SUPPORT
  • ASIN: B07C91DC31
  • Part No: RSS-3
Roof Pipe Support - 8 Pack | Rooftop Support | Saddle Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made of 100% Recycled Plastic | Heavy and Extremely Durable
8 Pack | Rooftop Support | Saddle Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made of 100% Recycled Plastic | Heavy

Roof Pipe Support

Each pipe stand will accommodate up to a 3 inch schedule 40 customary or "trade" size pipe. The maximum outside diameter of the pipe that can be cradled int he Saddle Support is 3.25". A rooftop support block or stand used to support rooftop gas pipes, electrical conduit, solar arrays, satellites, antennas, cable tray, disconnects, and junction boxes. The saddle support can also be used in mechanical, plumbing, refrigeration, HVAC, and electrical applications. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest in a 'U' shaped cradle type block made of 100% recycled plastic. Design Covered by United States Design Patent No.: US D837,638 S

  • Patented Design | Prevents Damage to Roof Membrane | Rounded Safety Edges | Heavy and Extremely Durable | No Accessories Needed
  • Support Gas Pipes, Electrical Conduit, Plumbing Pipes, Refrigeration Pipes
  • Unique Design Absorbs Thermal Expansion and Contraction
  • Makes Great Ships Ladder Base Support
  • Made of 100% Recycled Plastic | UV Resistant | Made in the USA | Versatile | Durable | Affordable
  • Brand: ROOFTOP SLEEPER SUPPORT
  • ASIN: B07BNXR9ZT
  • Part No: RSS-SS Base Only_cs8
Roof Pipe Support - Roof Top Blox RTB01 Polypropylene Roof Top Support Block for All Flat Commercial Roofs, 9
Roof Top Blox RTB01 Polypropylene Roof Top Support Block for All Flat Commercial Roofs, 9" x 9", 250 lb. Load at Single Point, Black (Pack of

Roof Pipe Support

Roof top blox is a polypropylene Roof top support block engineered to support load directly attached with traps, clips or clamps or easily Adapts with available accessories. Includes on board galvanized clamping strap for Short piping runs. Install every 7' along piping. 350lbs./158 kg Max. Static load with strut applied. 250lbs./113 kg Max. Static load single point loading. Bundled in convenient 8 Pack totes.

  • Heavy-duty, lightweight, uv resistant construction with a wide stable design
  • No roof penetration required
  • Iapmo r&t certified
  • Compact and lightweight contractor-friendly 8 pack
  • Supports gas piping, plumbing, havoc, conduit, cable tray and mechanical equipment
  • Color: Black
  • Brand: Roof Top Blox
  • ASIN: B00HLNF6KS
  • UPC: 898417002010
  • Part No: RTB01
Roof Pipe Support - Rooftop Support | Saddle Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made of 100% Recycled Plastic | Heavy and Extremely Durable
Rooftop Support | Saddle Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made of 100% Recycled Plastic | Heavy and Extremely

Roof Pipe Support

Each pipe stand will accommodate up to a 3 inch schedule 40 customary or "trade" size pipe. The maximum outside diameter of the pipe that can be cradled int he Saddle Support is 3.25". A rooftop support block or stand used to support rooftop gas pipes, electrical conduit, solar arrays, satellites, antennas, cable tray, disconnects, and junction boxes. The saddle support can also be used in mechanical, plumbing, refrigeration, HVAC, and electrical applications. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest in a 'U' shaped cradle type block made of 100% recycled plastic. Design Covered by United States Design Patent No.: US D837,638 S

  • Patented Design | Prevents Damage to Roof Membrane | Rounded Safety Edges | Heavy and Extremely Durable | No Accessories Needed
  • Support Gas Pipes, Electrical Conduit, Plumbing Pipes, Refrigeration Pipes
  • Makes Great Ships Ladder Base Support
  • Rounded Safety Edges | Heavy and Extremely Durable | No Accessories Needed
  • Made of 100% Recycled Plastic | UV Resistant | Made in the USA | Versatile | Durable | Affordable
  • Brand: ROOFTOP SLEEPER SUPPORT
  • ASIN: B07BNVSYGH
  • Part No: RSS-SS Base Only
Roof Pipe Support - 32 Pack | MIRO 1.5 Pillow Block Rooftop Support | Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made of 100% Recycled Polycarbonate (PC)
32 Pack | MIRO 1.5 Pillow Block Rooftop Support | Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made of 100% Recycled

Roof Pipe Support

Pillow Block Supports are an easy-to-install and a low-cost solution to many of your basic rooftop pipe support needs. Each pipe stand will accommodate up to a 1.5 inch customary or "trade" size pipe and will suspend the pipe 2 inches off of the roof membrane. Max load is 48 lbs. The Pillow Block Support can support rooftop gas pipes, electrical conduit, solar lines, and just about any other mechanical piping. The load-dispersing foot design can be used in conjunction with a spacer as needed, or can be used on its own without risk of compromising a roof membrane. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest in a 'U' shaped cradle type block made of 100% recycled UV stable polycarbonate.

  • Prevents Damage to Roof Membrane
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes
  • Affix Pipes to Support with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included)
  • Made of 100% Recycled Polycarbonate (PC) | Made in the USA | Versatile | Durable | Affordable
  • 20 Year Warranty
  • Color: Black
  • Brand: MIRO
  • ASIN: B07CZ6X9YQ
  • Part No: 1.5 ST-MR.3cs32
Roof Pipe Support - DuraVent 6DP-XRB DuraPlus 6
DuraVent 6DP-XRB DuraPlus 6" Extended Roof Bracket Supports Chimney Stove Pipe for Stability Against Wind & Snow, Includes Mounting Brackets & Adjustable

Roof Pipe Support

Use when securing DuraPlus pipe to the roof when it extends more than 4' above the roof line. DuraPlus is a triple-wall, all-fuel chimney for use with wood stoves, fireplaces, furnaces, boilers, stoves, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas.

  • Use the Extended Roof Bracket when securing DuraPlus pipe to the roof when it extends more than 4 feet above the roof line.
  • Provides stability to the chimney against wind and snow
  • Mounting brackets and adjustable legs included
  • Construction materials: Galvalume
  • Diameter: 6"
  • Color: Metallic
  • Brand: DuraVent
  • ASIN: B0011Z5ZNK
  • UPC: 662492159514
  • Part No: 6DP-XRB
Roof Pipe Support - 9 Pack | PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC
9 Pack | PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled

Roof Pipe Support

The Rooftop Sleeper Support RSS-3 is a rooftop support block or stand that can be cut to desired length using various saws. Used to support rooftop water lines, gas lines, electrical conduit, condensate lines, and other types of rooftop plumbing. Pipes can be affixed to the support block using pipe guides, clamps, tab tape and other types of user-provided hardware. Ultimate loading of the rooftop pipe support should not exceed 50 lbs. per 6" of support. Consult the roofing manufacturer for maximum allowable roof load. This rooftop pipe support is made of extruded, 100% recycled PVC. Each unit is 3' long x 4.875" wide x 3.5" tall and can be cut to any desired length. Space the rooftop pipe supports in accordance with local code or specification requirement for the component being support. When using as a pipe support, manufacturer recommended spacing is 10 feet on center, not to exceed max load per roofing manufacturer. Continual maintenance is not required, but semi-annual inspection is recommended to check for proper pipe stand position, pipe alignment, weight distribution and installation. Improper installation may cause pipe stand damage or failure and damage to the pipe or roof surface. Suggested minimum length is 6" (152.4 mm) to provide adequate stability.

  • Can Be Cut to Desired Lengths | Suggested minimum length is 6" (152.4 mm) to provide adequate stability.
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included)
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable
  • Case of 9 Supports
  • Color: White
  • Brand: ROOFTOP SLEEPER SUPPORT
  • ASIN: B07BNV8N41
  • Part No: RSS-3_cs9
Roof Pipe Support - Pipe Support Block, 500 Lb Load, 5 In H
Pipe Support Block, 500 Lb Load, 5 In

Roof Pipe Support

'Pipe Support Block;Max. Load (Lb.) 500;Material of Construction Recycled Rubber;Length (In.) 9.6;Width (In.) 6;Height (In.) 5;Roof Top Supports, Channel Height 1 In, Channel Gauge14 In;Package Quantity 1'

    • Brand: DURA-BLOK
    • ASIN: B06X9LG6BK
    • UPC: 696505341498
    • Part No: DB10
    Roof Pipe Support - Selkirk Metalbestos 6T-PCK Pitched Ceiling Support Kit Stainless
    Selkirk Metalbestos 6T-PCK Pitched Ceiling Support Kit

    Roof Pipe Support

    For installation of a chimney in a cathedral or pitched ceiling such as standard A-frame construction. The pitched ceiling support kit provides all necessary parts for a complete installation with the exception of the required Insulated pipe lengths and adjustable flashing. Contains: round top, storm collar, roof support package, adjustable ceiling plate, finish collar, and a smoke pipe adapter with coupler.

    • For installation of a chimney in a cathedral or pitched ceiling such as standard A-FRAME construction
    • The pitched ceiling support kit provides all necessary parts for a complete installation with the exception of the required insulated pipe lengths and adjustable flashing
    • Contains: round top, storm collar, roof support package, adjustable ceiling plate, finish collar, and a smoke pipe adapter with coupler
    • Color: Stainless Steel
    • Brand: Selkirk Metalbestos
    • ASIN: B0009SQG3I
    • UPC: 783961054663
    • Part No: 6T-PCK
    Roof Pipe Support - Selkirk Metalbestos 6T-RSP Stainless Steel Roof Support Package, 6
    Selkirk Metalbestos 6T-RSP Stainless Steel Roof Support Package,

    Roof Pipe Support

    For freestanding fireplaces and open cathedral ceiling installations. Fits all roof pitches and requires only simple framing. Mounts easily onto top of roof through opening that allows 2" Clearance. Maximum length of chimney which can be suspended below is 20'. Maximum TOTAL length is 30'. The roof support kit (RSK) contains roof brackets and necessary hardware. The roof support package (RSP) contains one 18" Length of pipe, roof brackets and necessary hardware. The brackets may be assembled to any standard Pipe length At any desired height. Locking bands must be used at each pipe joint When installing either the RSK or RSP.

    • For freestanding fireplaces and open cathedral ceiling installations
    • Fits all roof pitches and requires only simple framing
    • Mounts easily onto top of roof through opening that allows 2" Clearance
    • Color: Stainless Steel
    • Brand: Selkirk Metalbestos
    • ASIN: B0002YVF0S
    • UPC: 053713130786
    • Part No: 6T-RSP

    Roof Pipe Support G24 Search Results

    Looking for more Roof Pipe Support similar ideas? Try to explore these searches: 1 Inch 16 Gauge, Green Fat Quarter Bundle, and Guitar Club.

    Roof Pipe Support - Popular Video Reviews

    MIRO Industries - 30 years of Rooftop Pipe Support Systems

    Roof Pipe Support

    MIRO Industries has been the preferred commercial rooftop industries best provider mechanical, roofing and electrical industries with durable non-penetrating pipe supports for over 30 years. We offer turn key solution to rooftop pipe racking, support stands, pipe hangers, roller supports, pipe cr...

    • Likes: 16
    • View count: 3067
    • Dislikes: 0
    • Comments: 0
    Tags: rooftop,pipe,supports

    how to flash around an existing electric service mast pipe on roof

    Roof Pipe Support

    Re roofing around an existing service head. This gizmo costs more than the cheap ones but works well and should never leak since such a great design. I do not sell these but used one on my existing roof. I wanted a design that had no seam to fail; or one that uses goop to seal. This was installed...

    • Likes: 25
    • View count: 27398
    • Dislikes: 13
    • Comments: 4
    Tags: electrical,pipe,boot,gooseneck,titanium,udl,roofing,roof,flashing,leaks,house,rework,mast

    Roof Pipe Support

    Roof Pipe Support

    We are the world-renowned manufacturer for roof pipe support and equipment support systems. We understand construction needs better. Thus you can hire us custom designed supports for pipes, conduits, ducts, and mechanical equipment and can have our outstanding customer service at very low pricing...

    • Likes: 1
    • View count: 510
    • Dislikes: 0
    • Comments: 0
    Tags: roof,supports


    365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.