Compare Prices

Scuba Tank Pressure Gauge

Scuba Tank Pressure Gauge - Scuba Choice Scuba Diving Yoke Tank Pressure Checker 5000 PSI 350 BAR
Scuba Choice Scuba Diving Yoke Tank Pressure Checker 5000 PSI 350

Scuba Tank Pressure Gauge

One of the best selling items in Scuba Choice. This item features everything you need to get started, regardless if you're a beginner or expert,.

  • For YOKE valve tank
  • Reads up to 5000 PSI and 350 BAR
  • Size: 7" Long * 2-1/4" Wide.
  • Brand: Scuba Choice
  • ASIN: B007XAQBLW
  • UPC: 608939468924
  • Part No: SCTCY-01
Scuba Tank Pressure Gauge - XS Scuba Tank Pressure Checker
XS Scuba Tank Pressure

Scuba Tank Pressure Gauge

Standard Fill Checker Gauge (p/n GB01) - Easy read 2.75" diameter gauge - Dual dial - 0 to 5000 psi and 0 to 350 bar - Stainless steel case - 1.5% Accuracy throughout full range Twist Bleed Screw (p/n AC361) - Stainless steel bleed screw - Positive seal PDVF seat - Easy replacement bleeder screw Attachment - Attachment to K valves only - Large comfortable handwhee Gauge Boot(p/n GP17) - Included with fill checker - Snug fitting, silicone compound for protection of gauge

  • Easy read 2.75" diameter gauge
  • Dual dial - 0 to 5000 psi and 0 to 350 bar
  • Stainless steel case
  • Accuracy 1.5% throughout entire scale
  • Positive seal PDVF seat
  • Brand: XS Scuba
  • ASIN: B0029NGU8M
  • UPC: 696735702465
  • Part No: AC360
Scuba Tank Pressure Gauge - Cressi Mini SPG (imperial)
Cressi Mini SPG (imperial)

Scuba Tank Pressure Gauge

The Mini Submersible Pressure Gauge luminescent dial reads from 0 to 5, 000 PSI. For at-a-glance monitoring of air pressure the instruments face is divided into three different colored zones: the area from 600 PSI and below is highlighted in red with a solid bar and red stripes. If the gauge is used on deeper dives, the red scale extends and fades to 1, 300 PSI, this provides for added reserve air indication required at greater depths. From 600 to approximately 3, 000 PSI the scale is green and from 3, 000 PSI to end of scale is colored in blue. The front glass lens is made to act as a pressure relief valve. In the event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape. The Instrument is housed in a small, modern shaped boot, made from polycarbonate and Desman (a thermoplastic polyurethane), two materials that protection from shocks, scratches and which, at the same time, is very lightweight. The Pressure Gauge housing is made of durable chrome plated brass. The Gauge Boot has an attachment point for a clip or lanyard. The Mini SPG is equipped with a 7/16" threaded high-pressure hose. The Mini SPG is developed and made in Italy by Cressi, a brand pioneer in Scuba Diving, Snorkeling and Swimming equipment. The...

  • The Mini Submersible Pressure Gauge luminescent dial reads from 0 to 5000 PSI (350 BAR) and is a must-have for any Scuba Diver.
  • For at-a-glance monitoring of air pressure, the instruments face is divided into three different colored zones.
  • The blue zone is the safety zone, indicating an air-pressure from 3000 to 5000 PSI (200 to 350 BAR).
  • The scale in red indicated when the air is about to end. The alert zone is indicated with red stripes and is when the air pressure is below 600 PSI (50 BAR).
  • The front glass lens is made to act as a pressure relief valve. n the event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape.
  • The Instrument is housed in a small, modern shaped boot, made from polycarbonate and Desman, to protection from shocks, scratches and ensure lightness.
  • The Gauge Boot has an attachment point for a clip or lanyard.
  • The Mini SPG is equipped with a 7/16" threaded high-pressure hose.
  • The Mini SPG is developed and made in Italy by Cressi, a brand pioneer in Scuba Diving, Snorkeling and Swimming equipment since 1946.
  • Color: imperial
  • Brand: Cressi
  • ASIN: B0000DYPUM
  • UPC: 843607000420
  • Part No: KK760400
Scuba Tank Pressure Gauge - Promate Yoke Air Tank Pressure Gauge Checker for Scuba Diving
Promate Yoke Air Tank Pressure Gauge Checker for Scuba

Scuba Tank Pressure Gauge

A brand new yoke high pressure tank checker gauge to fit high pressure yoke scuba tank valves with pressure release.

  • Scuba tank pressure checker for yoke valve tanks
  • Reading: 0 to 5000 PSI/0 to 350 bar
  • Easy twist on/off pressure release
  • Material: chrome plated marine brass with rubber boot
  • Size: 7" long 2-1/4" wide
  • Brand: Promate
  • ASIN: B000HZI6UO
  • UPC: 818197021957
  • Part No: OC100Y
Scuba Tank Pressure Gauge - H2ODYSSEY Yoke Pressure Tester
H2ODYSSEY Yoke Pressure

Scuba Tank Pressure Gauge

H2Odyssey Scuba Diving Yoke Pressure Tester

  • Oil filled gauge - protects the needle and accuracy if gauge is dropped
  • Easy pressure release valve with large bolt
  • 350 BAR/ 5000 psi gauge
  • Brand: H2ODYSSEY
  • ASIN: B07GV546VG
  • UPC: 682895034812
  • Part No: 682895034812
Scuba Tank Pressure Gauge - Scuba Choice Scuba Diving DIN Tank Pressure Checker 5000 PSI 350 BAR
Scuba Choice Scuba Diving DIN Tank Pressure Checker 5000 PSI 350

Scuba Tank Pressure Gauge

One of the best selling items in Scuba Choice. This item features everything you need to get started, regardless if you're a beginner or expert,.

  • For DIN valve tank
  • Reads up to 5000 PSI and 350 BAR
  • For DIN valve.
  • Brand: Scuba Choice
  • ASIN: B007XAQVDK
  • UPC: 608939468931
  • Part No: SCTCD-01
Scuba Tank Pressure Gauge - Cressi Mini Console PD2 (imperial)
Cressi Mini Console PD2

Scuba Tank Pressure Gauge

The Cressi Mini-Console PD2 is a small scuba diving console that houses the Mini-Manometer Pressure Gauge and the Analog Depth Gauge. Both gauges are high-quality instruments with chrome plated brass cases and the depth gauge has a diaphragm membrane actuated function. Both gauges have a large circular easy-to-read scales. The instruments are housed in a small, modern shaped console boot, made from Polycarbonate and Desmopan, (a Thermoplastic Polyurethane) two materials that guarantee protection from shocks, scratches and which, at the same time, is very light. At the end of the console, slightly to the sides, there are two eyelets for fastening the instrument to the BCD or harness with a clip or lanyard so that it does not hang down with the risk of catching and damaging the environment or the instruments. The luminescent face of the 230' Depth Gauge, the first 40' of Depth Readings are in 10' increments, (which correspond to the area of decompression stops), and are widely spaced for ease-of-reading. For at-a-glance monitoring of depth, the face-is-divided into 3-different colored zones: green up to 66', light-blue from 66' to 130' and red from 130' to the end of the scale. The Instrument has a maximum depth Indicator that stops on the maximum depth reached during the dive. Thi...

  • The Cressi Mini-Console PD2 is a small scuba diving console that houses the Mini-Manometer Pressure Gauge and the Analog Depth Gauge.
  • Mini-depth gauge reads to 70 meters (230 feet). Depth indications spaced out in first 12 meters (40 feet) for precise readings during safety stops. Maximum depth indicator.
  • Pressure gauge dial is color-coded in red, green and blue for instant readability. Reads pressures up to 350 BAR or 5000 PSI.
  • Both instruments built with chrome-plated brass case for maximum durablity. Compact rubber boot is textured for a sure grip.
  • Two connection loops, one on each side, for attaching a clip or bungee.
  • Color: imperial
  • Brand: Cressi
  • ASIN: B0000DYQOW
  • UPC: 700953101884
  • Part No: KC765250
Scuba Tank Pressure Gauge - XS Scuba Deluxe Yoke / Din Tank Pressure Checker
XS Scuba Deluxe Yoke / Din Tank Pressure

Scuba Tank Pressure Gauge

XS Scuba Deluxe Scuba Air Tank Filler Checker Gauge Easy-Read 2in. diameter XS Scuba gauge Dual Dial - 0 to 5000 psi and 0 to 350 bar Stainless Steel case 1% accuracy throughout full range Liquid silicone filled to dampening Air bubble to allow for expansion with temperature change Protective rubber boot Twist Bleeder Stainless steel quick-action bleed screw Positive seal PDVF seat Easy replacement bleeder screw DIN or Yoke attachment Attachment to 'K' Valves Attachment to 200 bar to 300 bar DIN valves Spin on Yoke

  • The ultimate, versatile pressure checker
  • Twist-bleed gives a quick vent in either direction
  • Accuracy 1.5% throughout entire scale
  • Protective rubber boot
  • Check pressure of both yoke and DIN valves
  • Brand: XS Scuba
  • ASIN: B000T02HTS
  • Part No: AC365
Scuba Tank Pressure Gauge - IST Pony bottle gauge 5000 PSI
IST Pony bottle gauge 5000

Scuba Tank Pressure Gauge

IST's Pony bottle gauge is a mini package with lots of convenience built-in. It easily connects to the high-pressure port of your pony bottle regulator or other alternate tank regulator to show pressure in an easy-to-read display. You know the hassles involved with using a pony bottle and trying to find out how much air is in the tank. Switching regulators to view the primary pressure gauge or adding a separate pressure gauge to the pony bottle is an inconvenience. Problems over, with IST's mini SPG. It has a pressure range from 0-350 BAR, an easy to read display and comes equipped with a high-pressure O-ring for immediate installation. This is a great, must-have accessory for your dive bag!

  • Maximum pressure 350 BAR (or 5000psi).
  • Small, compact, weighs only 40g (1.40oz).
  • Fluorescent gauge face.
  • Ideal for pony bottle use.
  • Comes equipped with a high-pressure O-ring for immediate installation.
  • Brand: IST
  • ASIN: B003515YDO
  • UPC: 818363015773
  • Part No: GP-16
Scuba Tank Pressure Gauge - Sopras Sub High Pressure Gauge with High Pressure Hose Monitor Pressure Air Scuba Tank Pony Bottom in PSI Scuba Diving Gear SPGs
Sopras Sub High Pressure Gauge with High Pressure Hose Monitor Pressure Air Scuba Tank Pony Bottom in PSI Scuba Diving Gear

Scuba Tank Pressure Gauge

Sopras Sub High Pressure Gauge with High Pressure Hose Monitor Pressure Air Scuba Tank Pony Bottom, Scuba Diving Gear SPGs

    • Brand: Sopras Sub
    • ASIN: B01N9NPY3Q
    • UPC: 787639189145
    • Part No: Sopsubho

    Scuba Tank Pressure Gauge S412 Search Results

    Looking for more Scuba Tank Pressure Gauge similar ideas? Try to explore these searches: Black Mustang Convertible, Whites Long Sleeve Dress Shirt, and Heart Favor Bags.

    Scuba Tank Pressure Gauge - Popular Video Reviews

    Dive Gauge Guide

    Scuba Tank Pressure Gauge

    https://www.simplyscuba.com/departments/Instruments.aspx Scuba diving gauges and instruments are an essential part of any divers equipment, ensure your gauges are accurate by purchasing only major brand named products like those shown here. .................................... Social Links Face...

    • Likes: 43
    • View count: 6142
    • Dislikes: 3
    • Comments: 3
    Tags: simplyscuba,simply scuba,The Simply Group (TSG),Dive Gauge Guide,how to,advice,scuba diving (spor...

    Vintage Scuba: Surface Pressure Checkers - S02E09

    Scuba Tank Pressure Gauge

    Long before Submersible Pressure Gauges (SPGs) were invented, divers manually checked tanks before and after dives with a 'pressure checker'. Alec shows several gauges and explains their unique features back when a scuba tanks maximum pressure was 2475 psi (170 bar). *** In this episode of Vint...

    • Likes: 39
    • View count: 1155
    • Dislikes: 0
    • Comments: 11
    Tags: alec peirce scuba,scuba tech tip,tech tip,scuba tip,underwater,scuba diving,scuba,vintage scuba,s...

    Is my Scuba Tank Full?

    Scuba Tank Pressure Gauge

    A neat trick to see if a scuba tank is full or not, without having to use any gauges. Check the pressure by listening.

    • Likes: 54
    • View count: 21100
    • Dislikes: 6
    • Comments: 18
    Tags: scuba,tank,pressure,full


    365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.