Compare Prices

Stainless Steel Socket Weld Fittings

Stainless Steel Socket Weld Fittings - Parker Weld-Lok 4-4 GW-SS Stainless Steel 316 Socket Weld Tube Fitting, Connector, 1/4
Parker Weld-Lok 4-4 GW-SS Stainless Steel 316 Socket Weld Tube Fitting, Connector, 1/4" Tube OD x 1/4" NPT Female, 0.19"

Stainless Steel Socket Weld Fittings

The socket weld tube fitting design is commonly used in the demanding environments of chemical and power plants. Available standard in 316 stainless steel, the socket weld fitting provides a highly reliable, sturdy and tight integral line system that remains unaffected by shock, vibration or thermal distortion. The weld used in joining a tube to a socket weld tube fitting is like any other type of "tee" weld. The root (i.e., the point of intersection of the outside of the tube and annular end area of the fitting) must be included in the weld zone. Careful welding procedures are normally followed to assure that this root area is included in the weld. If penetration is not achieved, the joint will have two built-in stress risers which may greatly reduce the strength of the weld. Upon application of an extreme load, these stress risers could result in cracks which could propagate out through the weld or tube depending upon the direction of the greatest load. The Weld-lok fitting has been designed and tested in accordance with ANSI B16.11, which covers "Forged Steel Fittings Socket Welded and Threaded." Our design parallels the Schedule 80, 3000-pound fitting pressure class, and is compatible with O.D. tube wall thickness meeting the related (3000-psi pipe class) pressure requirement...

  • Brand: Parker
  • ASIN: B0065A8VVE
  • Part No: 4-4 GW-SS
Stainless Steel Socket Weld Fittings - 304/304L Forged Stainless Steel Pipe Fitting, Tee, Socket Weld, Class 3000, 1/2
304/304L Forged Stainless Steel Pipe Fitting, Tee, Socket Weld, Class 3000, 1/2"

Stainless Steel Socket Weld Fittings

This tee class 3000 is a stainless-steel 304/304L t-shaped pipe fitting with female socket welds on the run and branches for connecting a total of three pieces of pipe. The tee fitting changes flow direction and the socket weld connections have internal recesses on the inside diameters to allow for a smooth bore and better fluid flow. This class 3000 pipe fitting that has been forged for durability and is made from stainless steel 304/304L for corrosion resistance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. This fitting meets standards ASTM A182, ASME SA182, and ANSI B16.11 for quality assurance. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

  • Brand: Merit Brass
  • ASIN: B003LSSKCI
  • Part No: SW3406D-08
Stainless Steel Socket Weld Fittings - Stainless Steel 316 Cast Pipe Fitting, 90 Degree Elbow, Socket Weld, MSS SP-114, 1
Stainless Steel 316 Cast Pipe Fitting, 90 Degree Elbow, Socket Weld, MSS SP-114, 1"

Stainless Steel Socket Weld Fittings

The Merit Brass stainless steel 316 cast pipe fitting is a 90-degree elbow with female socket weld openings for connecting two pipes. The socket weld elbow has an internal recess on the inside diameter to allow for a smooth bore and better fluid flow. This fitting is made of stainless steel 316, which is higher strength and more corrosion resistant than stainless steel 304 and meets standards MSS SP-114, ANSI B1.20.1, and ASTM A351 for quality assurance. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Merit Brass manufactures pipe nipples following ISO 9001 standards for quality assurance. Family-owned since 1937, the company is based in Cleveland, OH. Merit Brass distributes pipe fittings to the United States and Canada.

  • Brand: Merit Brass
  • ASIN: B003GXF6Y8
  • Part No: SWM601-16
Stainless Steel Socket Weld Fittings - 304/304L Forged Stainless Steel Pipe Fitting, 90 Degree Elbow, Socket Weld, Class 3000, 3/8
304/304L Forged Stainless Steel Pipe Fitting, 90 Degree Elbow, Socket Weld, Class 3000, 3/8"

Stainless Steel Socket Weld Fittings

This 90-degree elbow is a class 3000 forged stainless steel 304/304L pipe fitting with female socket weld ends for connecting male pipes and fittings. The 90-degree elbow changes flow direction between pipes and has internal recesses on the inside diameters to allow for a smooth bore and better fluid flow. The class 3000 pipe fitting can be used in high pressure applications and is made from forged stainless steel 304/304L for corrosion resistance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. This fitting meets standards ASTM A182, ASME SA182, and ANSI B16.11 for quality assurance. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

  • Brand: Merit Brass
  • ASIN: B003LSSK6Y
  • Part No: SW3401D-06
Stainless Steel Socket Weld Fittings - 304/304L Forged Stainless Steel Pipe Fitting, 45 Degree Elbow, Socket Weld, Class 3000, 1
304/304L Forged Stainless Steel Pipe Fitting, 45 Degree Elbow, Socket Weld, Class 3000, 1"

Stainless Steel Socket Weld Fittings

This 45-degree street elbow is a class 3000 forged stainless-steel 304/304L pipe fitting with female socket weld ends for connecting male pipes and fittings. The 45-degree elbow changes flow direction and has internal recesses on the inside diameters to allow for a smooth bore and better fluid flow.The class 3000 elbow can be used in high pressure applications and is made from forged stainless steel 304/304L for corrosion resistance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. This fitting meets standards ASTM A182, ASME SA182, and ANSI B16.11 for quality assurance. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

  • Brand: Merit Brass
  • ASIN: B003LSSKAK
  • Part No: SW3402D-16
Stainless Steel Socket Weld Fittings - Stainless Steel 316 Cast Pipe Fitting, Tee, Socket Weld, MSS SP-114, 3/4
Stainless Steel 316 Cast Pipe Fitting, Tee, Socket Weld, MSS SP-114, 3/4"

Stainless Steel Socket Weld Fittings

The Merit Brass tee is a stainless steel 316 socket weld cast pipe fitting for connecting and branching three sections of pipe or fittings. The socket weld tee has an internal recess on the inside diameter of each connection to allow for a smooth bore and better fluid flow between pipes. This tee is made of stainless steel 316, which is higher strength and more corrosion resistant than stainless steel 304. This fitting meets standards MSS SP-114, ANSI B1.20.1, and ASTM A351 for quality assurance. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Merit Brass manufactures pipe nipples following ISO 9001 standards for quality assurance. The company, family-owned since 1937 and headquartered in Cleveland, OH, distributes pipe fittings in the United States and Canada.

  • Brand: Merit Brass
  • ASIN: B003GXF71U
  • Part No: SWM606-12
Stainless Steel Socket Weld Fittings - 304/304L Forged Stainless Steel Pipe Fitting, Coupling, Socket Weld, Class 3000, 1
304/304L Forged Stainless Steel Pipe Fitting, Coupling, Socket Weld, Class 3000, 1"

Stainless Steel Socket Weld Fittings

This coupling socket weld is a class 3000 forged stainless steel 304/304L pipe fitting with two socket weld female ends for connecting and extending pipes going in the same direction. The socket weld connections have an internal recess on the inside diameters to allow for a smooth bore and better fluid flow between connecting pipes. This class 3000 coupling has been forged for durability and is made from stainless steel 304/304L for corrosion resistance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. This fitting meets standards ASTM A182, ASME SA182, and ANSI B16.11 for quality assurance. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

  • Brand: Merit Brass
  • ASIN: B003LSSKFU
  • Part No: SW3411D-16
Stainless Steel Socket Weld Fittings - Stainless Steel 304/304L Pipe Fitting, Flange, Socket Weld, Class 150, 1
Stainless Steel 304/304L Pipe Fitting, Flange, Socket Weld, Class 150, 1" Pipe

Stainless Steel Socket Weld Fittings

The Merit Brass socket-weld flange is a class 150 stainless steel 304/304L pipe used to join two sections of a piping system. This socket weld fitting has an internal recess on the inside diameter to allow for a smooth bore and better fluid flow between pipes and bolt holes for connecting to flat surfaces or other flanges. Made of stainless steel 304L, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation due to welding, ensuring corrosion resistance. This class 150 fitting meets steel 304 strength standards, 304L extra-low carbon standards, and specifications ASTM A182, ASME SA182, and ANSI B16.5 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Merit Brass manufactures pipe nipples following ISO 9001 standards for quality assurance. The co...

  • Brand: Merit Brass
  • ASIN: B003ULOK7U
  • Part No: AC453L-16
Stainless Steel Socket Weld Fittings - Stainless Steel 316 Cast Pipe Fitting, Union, Socket Weld, MSS SP-114, 1/2
Stainless Steel 316 Cast Pipe Fitting, Union, Socket Weld, MSS SP-114, 1/2"

Stainless Steel Socket Weld Fittings

The Merit Brass union is a socket weld stainless steel 316 cast pipe fitting for connecting and extending two male pipes. The union has three pieces and includes a threaded connection that can be screwed or unscrewed to connect or disconnect pipes more easily than couplings. The socket weld union has an internal recess on the inside diameter of each end to allow for a smooth bore and better fluid flow between pipes. It is made of stainless steel 316, which is higher strength and more corrosion resistant than stainless steel 304. This fitting meets standards MSS SP-114, ANSI B1.20.1, and ASTM A351 for quality assurance. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Merit Brass manufactures pipe nipples following ISO 9001 standards for quality assurance. The company, family-owned since 1937 and headquartered in Cleveland, OH, distributes pipe fittings in the United States and Canada.

  • Brand: Merit Brass
  • ASIN: B003GXF760
  • Part No: SWM687-08
Stainless Steel Socket Weld Fittings - 316/316L Forged Stainless Steel Pipe Fitting, Cap, Socket Weld, Class 3000, 1
316/316L Forged Stainless Steel Pipe Fitting, Cap, Socket Weld, Class 3000, 1"

Stainless Steel Socket Weld Fittings

This class 3000 cap is a forged stainless steel 316/316L pipe fitting with a female end for closing and terminating pipe ends. The cap fits over the end of male pipes and is made of forged stainless steel 316/316L for durability and corrosion resistance. The class 3000 fitting has a socket weld connection with an internal recess on the inside diameter to allow for a smooth bore. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. This fitting meets standards ASTM A182, ASME SA182, and ANSI B16.11 for quality assurance. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

  • Brand: Merit Brass
  • ASIN: B003LSSO2Y
  • Part No: SW3616D-16

Stainless Steel Socket Weld Fittings Q389 Search Results

Looking for more Stainless Steel Socket Weld Fittings similar ideas? Try to explore these searches: 2001 Mercedes Benz Suv, Tennessee Inflatable, and Ford Crown Victoria Diamond.

Stainless Steel Socket Weld Fittings - Popular Video Reviews

Socket Weld Industrial Bookends

Stainless Steel Socket Weld Fittings

Visit the Weldmonger store http://weldmongerstore.com/ for a detailed article on socket welds go here http://goo.gl/7OCCRk In this weekly video, I am making some socket weld bookends. Tips for fitting up socket welds, some walking the cup Tig welding , plasma cutting 1/2" steel, and more.

  • Likes: 2835
  • View count: 430960
  • Dislikes: 69
  • Comments: 136
Tags: tig welding,socket weld,socket welds,walking the cup,cup walking,tig welding project,diy bookends...

Tips On How To Weld Socket Welds

Stainless Steel Socket Weld Fittings

Tips and tricks on fitting and welding socket welds, dont get bit by a fitter who is cutting corners. Trust me they will get away with as much as you let them

  • Likes: 265
  • View count: 35722
  • Dislikes: 14
  • Comments: 26
Tags: GTAW,pipe,welding,6gtest,6g,test,tig,tigroot,rootpass,root,weldingtest,closedgap,pipeline,pipewel...

TIG Welding Stainless Steel - Walking the Cup vs Tig Finger version 2

Stainless Steel Socket Weld Fittings

http://www.weldmongerstore.com/tig-finger/ A widely used tig welding technique for stainless steel is called "walking the cup". But it does not always work best. And for some applications, it is not permitted because it leaves scratches on the surface of the metal sometimes. A Tig Finger comes i...

  • Likes: 2126
  • View count: 484625
  • Dislikes: 69
  • Comments: 101
Tags: tig welding,tig welding stainless,welding stainless steel,tig welding tips,tig welding techniques...


365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.