Compare Prices

Throttle Linkage

Throttle Linkage - JEGS 15795 Adjustable Throttle Linkage Rod
JEGS 15795 Adjustable Throttle Linkage

Throttle Linkage

Adjustable Throttle Linkage Rod1967-69 Camaro/FirebirdUniversal (Holley/Edelbrock/BG/Carter AFB)Adjustable from 9"-12"1/4"-28 RH & 1/4"-28 LHMade in the USA Will fit other factory throttle levers with 1/2" holeCheck center-to-center distance before ordering

  • 1967-69 Camaro/Firebird
  • Universal (Holley/Edelbrock/BG/Carter AFB)
  • Adjustable from 9"-12"
  • 1/4"-28 RH & 1/4"-28 LH
  • Made in the USA
  • Brand: JEGS
  • ASIN: B078WHYWYL
  • UPC: 889944028918
  • Part No: 15795
Throttle Linkage - Throttle Carburator Linkage 18
Throttle Carburator Linkage 18" Gas Pedal Linkage Hot Rod Rat IMCA Modified Sand Bryke

Throttle Linkage

Throttle Linkage. 1/4" heims both Right-Hand and Left-Hand. Can be cut to desired length. Tapped both Right-Hand and Left-Hand for easy adjustment

  • 18" Throttle Linkage
  • 1/4" heims both Right-Hand and Left-Hand
  • Can be cut to desired length
  • Tapped both Right-Hand and Left-Hand for easy adjustment
  • Brand: Bryke Racing
  • ASIN: B06XR7F5QV
  • Part No: 520-018
Throttle Linkage - EZGO Ball Joint Socket - 24465G1
EZGO Ball Joint Socket -

Throttle Linkage

This Ball Joint Socket (# 24465G1) is used to connect linkages in various locations and is compatible with several E-Z-GO vehicles. Parts such as a carburetor, choke, accelerator, potentiometer, oil injection, and rear differential assemblies utilize this part to connect linkages that have multiple angles that they move upon.

  • Used on 1989-2008 e-z-go gas and electric marathon, txt, medalist, 4/6-passenger shuttle, st 350, st sport, st express, workhorse 800/1200, refresher, 775, 804, 875, shuttle 950, pc4/pc4x/pc4gx/pc4gxi, and xi300/500/804 vehicles
  • Attaches the front wheels to the axle, and integral in supporting the vehicle's weight
  • Material: acetal resin
  • Brand: EZGO
  • ASIN: B007R0J9J4
  • UPC: 848134005467
  • Part No: 24465G1
Throttle Linkage - Eckler's Premier Quality Products 33-185407 - Camaro Throttle Rod, Universal
Eckler's Premier Quality Products 33-185407 - Camaro Throttle Rod,

Throttle Linkage

Original Style Bend Or Modify As Needed Helps Maintain Stock Look 14-1/2" Length Swivel Included Do you have an intake where your original throttle rod will not work? Rick's offers thisaccelerator rod to work with most odd intake combinationswhile mantaining a stock look.

  • Original Style
  • Bend Or Modify As Needed
  • Swivel Included
  • 1967-1981 Camaro Throttle Rod, Universal
  • Brand: Premier Quality Products
  • ASIN: B01KN0DE68
  • Part No: 33-185407-1
Throttle Linkage - Mr. Gasket 3810G Carburetor Linkage Standard Ball Joint
Mr. Gasket 3810G Carburetor Linkage Standard Ball

Throttle Linkage

Mr. Gasket Carburetor Linkage Standard Ball Joint Component is designed to connect the throttle cable to the carburetor linkage. Carburetor linkage standard ball joint component is made of steel and has a zinc finish for durability. Includes a jam nut for the cable attachment and one for the carburetor linkage side. Sold as a pair.

  • Connects throttle cable to carburetor linkage
  • Stud diameter: 1/4
  • Steel with a zinc finish
  • Includes a jam nut for the cable attachment and one for the carburetor linkage side
  • Sold in pairs
  • Brand: Mr. Gasket
  • ASIN: B00068OQO2
  • UPC: 084041038109
  • Part No: 3810G
Throttle Linkage - Holley 20-2 Throttle Ball Assortment
Holley 20-2 Throttle Ball

Throttle Linkage

This throttle ball assortment helps to replace worn throttle studs and includes 4 throttle balls with various threads to allow linkage finishing. Each kit contains 1/4", 5/16", 7/32", and 3/8" stud adaptors which come with a limited warranty

  • Replaces worn throttle studs
  • Contains 4 throttle balls measuring 1/4", 5/16", 7/32", and 3/8"
  • Limited Warranty
  • Color: Zinc
  • Brand: Holley
  • ASIN: B00029JE2E
  • UPC: 090127035917
  • Part No: 202
Throttle Linkage - Redcat Racing 02056 Throttle/Brake Linkage Set
Redcat Racing 02056 Throttle/Brake Linkage

Throttle Linkage

Redcat Racing Part # 02056 throttle/brake linkage set. Compatible with the following Redcat Racing vehicles: lightning STR, SHOCKWAVE, Tornado S30, VOLCANO S30, vortex SS. Redcat Racing is located in the United States and has a full staff of support personnel to help you with your Redcat Racing product. Consult your vehicle manual for correct fitment and assembly. Since 2005 Redcat has been your source for fast - affordable - fun!

  • Genuine Redcat Racing Replacement part # 02056
  • Use only genuine Redcat Racing Replacement parts to achieve the best performance with your Redcat Racing vehicles.
  • Please consult your user's manual to ensure this is the correct part for your model.
  • For troubleshooting and Warranty information please contact a Redcat Racing customer service specialist at 602-454-6445 or by emailing [email protected]
  • Compatible with the following Redcat Racing vehicles: Lightning str, Shockwave, tornado S30, volcano S30, Vortex SS.
  • Brand: Redcat Racing
  • ASIN: B0040RYILG
  • UPC: 885939666059
  • Part No: 2056
Throttle Linkage - Edelbrock 7094 THROTTLE LINKAGE KIT
Edelbrock 7094 THROTTLE LINKAGE

Throttle Linkage

The Edelbrock Inline Mount Throttle Linkage Kit provides test confirmed smooth, consistent part-throttle operation with a 25 horsepower gain over Torker II and a torque gain of 30 foot / pounds over Performer. It uses high quality aluminum, stainless steel, brass parts and spherical rod ends for great performance and show quality. It will not fit tall-deck truck blocks and includes metering rods to calibrate Edelbrock carburetors. It is sold as a kit.

  • Provides test confirmed smooth, consistent part-throttle operation
  • Uses high quality aluminum, stainless steel, brass parts and spherical rod ends for great performance
  • Will not fit tall-deck truck blocks
  • Includes metering rods to calibrate Edelbrock carburetors
  • Brand: Edelbrock
  • ASIN: B00062YBFC
  • UPC: 085347070947
  • Part No: 7094
Throttle Linkage - Mr. Gasket 3811G Ball Joint Quick Disconnect Carburetor Linkage Component-Two Per Set
Mr. Gasket 3811G Ball Joint Quick Disconnect Carburetor Linkage Component-Two Per

Throttle Linkage

Mr. Gasket Ball Joint Quick Disconnect Carburetor Linkage Component has 6 separate linkage pieces to allow you to assemble your own custom carburetor linkage system using parts from one source. Every piece of the carburetor linkage is available separately eliminating the need to buy a standard kit for special applications.

  • Has 6 separate linkage pieces that allows easy assembling
  • Eliminates the need to buy a standard kit for special applications
  • Every piece is available separately
  • Sold as a pair
  • Brand: Mr. Gasket
  • ASIN: B00068OR14
  • UPC: 084041038116
  • Part No: 3811G
Throttle Linkage - Longacre 32700 Throttle Linkage Kit
Longacre 32700 Throttle Linkage

Throttle Linkage

Throttle linkage kit Includes 2 all metal rod ends, aircraft aluminum tube, Holley carb bushing, 2 return springs, bolts and nuts Just bend to clear air cleaner, cut to length, thread one end (requires 1/4"-28 tap) Easily forms to any car or use straight 6061 T6 Heat treated aluminum alloy is tough to bend but stays to shape in use - Won't straighten out and cut throttle travel, costing you precious horsepower Throttle rod length - 23-1/4" with 1/4"-28 RH Note: Both ends not threaded so you can cut to fit. 1/4"-28 RH tap is required to complete the installation. Instructions (PDF)

  • Includes 2 all metal rod ends, aircraft aluminum tube, Holley carb bushing, 2 return springs, bolts and nuts
  • Just bend to clear air cleaner, cut to length, thread one end (requires 1/4"-28 tap)
  • Easily forms to any car or use straight
  • 6061 T6 heat treated aluminum alloy is tough to bend but stays to shape in use - won't straighten out and cut throttle travel
  • Throttle rod length is 23-1/4" with 1/4"-28 RH
  • Brand: Longacre
  • ASIN: B001NNE4B4
  • UPC: 696736201622
  • Part No: 32700

Throttle Linkage G872 Search Results

Looking for more Throttle Linkage similar ideas? Try to explore these searches: Gel Limited Edition, New Era 59fifty, and New York Times Company History.

Throttle Linkage - Popular Video Reviews

How To Check Throttle Linkage Is Working Properly

Throttle Linkage

Holley offers tips on checking the throttle linkage on your four-barrel carburetor to ensure the throttle linkage is opening and closing the throttle blades properly.

  • Likes: 185
  • View count: 120196
  • Dislikes: 18
  • Comments: 7
Tags: holley four-barrel carburetor,holley throttle linkage checks

Making No-Slop Throttle Linkage

Throttle Linkage

http://flyingrc.net/makethrtlelink.html The full story has more details and photos.

  • Likes: 66
  • View count: 5749
  • Dislikes: 2
  • Comments: 3
Tags: RC throttle linkage,no-slop linkage,RC How-to

Custom One Piece Carburetor Link!

Throttle Linkage

Link to original thread- http://www.fordmuscle.com/archives/2004/08/ThrottleLinkage/ - I had a big problem with the old throttle linkage and found this one piece version much better to aquiring full throttle on any aftermarket carb. I hope this helped! - CHECK OUT MY COUSIN MICHAEL'S KILLER '69 M...

  • Likes: 123
  • View count: 7281
  • Dislikes: 2
  • Comments: 19
Tags: custom,hot rod,hot rod garage,road kill,throttle link,motor parts,ford,chevy,carburetor,holley,ed...


365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.