Compare Prices

Trailer Axle Spindle

Trailer Axle Spindle - Southwest Wheel 2,000 lbs Trailer Axle Spindle with 5-4.5
Southwest Wheel 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle

Trailer Axle Spindle

Easily build your own axle with this 2,000 lb rated hub assembly. This kit includes (1) - 5-Bolt on 4-1/2 inch bolt center hubs for 2,000 lb axle, (1) - 1" straight spindle, (1) castle nut, (1) cotter pin, (5) 1/2-20 lug nuts, (1) 1.987 O.D - 1.249 I.D grease seals, (2) L-44643 1" I.D inner/outer bearings and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

  • 1 1/4" Diameter, 4" long shaft, BT8 1" spindle.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 5-4.5" BT8 hub pre raced and studded.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Brand: Southwest Wheel
  • ASIN: B0158VHATO
  • Part No: BT8BT122E
Trailer Axle Spindle - Rigid Hitch Pair of 5-Bolt On 4-1/2 Inch Hub Assembly (AKSQ-3500545) Includes (2) Square Stock 1-3/8 Inch to 1-1/16 Inch Tapered Spindles & Bearings
Rigid Hitch Pair of 5-Bolt On 4-1/2 Inch Hub Assembly (AKSQ-3500545) Includes (2) Square Stock 1-3/8 Inch to 1-1/16 Inch Tapered Spindles &

Trailer Axle Spindle

Easily build your own axle with this 3,500 lb rated hub assembly. This kit includes (2) - 5-Bolt on 4-1/2 inch bolt center hubs for 3,500 lb axles, (2) - 1-3/8" to 1-1/16" tapered spindles, (2) castle nuts, (2) cotter pins, (10) 1/2-20 lug nuts, (2) 2.561" O.D - 1.719" I.D double lipped grease seals, (2) L-44649 1-1/16" I.D bearings, (2) L-68149 1-3/8" bearings, (2) spindle washers, and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

  • Pair of 1-3/8" to 1-1/16" tapered spindles.
  • Bearings included - (2) L-68149 1-3/8" I.D & (2) L-44649 1-1/16" I.D
  • Hubs have pre-installed pressed in races.
  • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2.59", flange diameter 6-1/2" and measures 4-1/4" tall (through center of hub)
  • Spindles feature a SQUARE 1-3/4" stock diameter with a tapered spindle surface of 1-3/8" & 1-1/16"
  • Brand: Rigid Hitch
  • ASIN: B013ILEEP4
  • Part No: AKSQ-3500545
Trailer Axle Spindle - Rigid Hitch Pair of 5-Bolt on 4-1/2 Inch Hub Assembly (AKSQ-2000545) Includes (2) Square Stock 1 Inch Straight Spindles & Bearings
Rigid Hitch Pair of 5-Bolt on 4-1/2 Inch Hub Assembly (AKSQ-2000545) Includes (2) Square Stock 1 Inch Straight Spindles &

Trailer Axle Spindle

Easily build your own axle with this 2,000 lb rated hub assembly. This kit includes (2) - 5-Bolt on 4-1/2 inch bolt center hubs for 2,000 lb axles, (2) - 1" straight spindles, (2) castle nuts, (2) cotter pins, (10) 1/2-20 lug nuts, (2) 1.987 O.D - 1.249 I.D double lipped grease seals, (4) L-44643 1" I.D inner/outer bearings and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

  • Pair of 1" straight spindles includes castle nuts and cotter pins.
  • Bearings included - (4) L-44643 1" inside dimension.
  • Hubs have pre-installed pressed in races.
  • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2.59", flange diameter 6-1/2" and measures 4-1/4" tall (through center of hub)
  • Spindles feature a SQUARE 1-1/2" stock diameter with a bearing surface of 1 Inch
  • Brand: Rigid Hitch
  • ASIN: B013VKCCH4
  • Part No: AKSQ-2000545
Trailer Axle Spindle - Rigid Hitch Trailer Axle Spindle (SA-1250) for 1
Rigid Hitch Trailer Axle Spindle (SA-1250) for 1" I.D.

Trailer Axle Spindle

This round trailer axle spindle is made from cold rolled steel and carries a 1,250 pound rating. The bearing surfaces are 1" diameter and the mounting surface is 1¼" diameter. Includes nut,washer and cotter pin.

  • This round trailer axle spindle is made from cold rolled steel and carries a 1,250 pound rating per spindle.
  • The bearing surfaces are 1" diameter and the mounting surface is 1¼" diameter.
  • 1" diameter bearing surfaces
  • 1¼" diameter mounting surface
  • Read product description below for more detailed information
  • Brand: Rigid Hitch
  • ASIN: B01MT1GY3K
  • Part No: SA-1250
Trailer Axle Spindle - Southwest Wheel 2,000 lbs Trailer Axle Spindle with 4-4
Southwest Wheel 2,000 lbs Trailer Axle Spindle with 4-4" Bolt Circle

Trailer Axle Spindle

Easily build your own axle with this 2,000 lb rated hub assembly. This kit includes (1) - 4-Bolt on 4 inch bolt center hubs for 2,000 lb axle, (1) - 1" straight spindle, (1) castle nut, (1) cotter pin, (5) 1/2-20 lug nuts, (1) 1.987 O.D - 1.249 I.D grease seals, (2) L-44643 1" I.D inner/outer bearings and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

  • 1 1/4" Diameter, 4" long shaft, BT8 1" spindle.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 4-4" BT8 hub pre raced and studded.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Brand: Southwest Wheel
  • ASIN: B0158VJBKA
  • Part No: BT8BT121E
Trailer Axle Spindle - Round Stock - Trailer Axle Spindle With 4-Hole Flange - 1-3/8 Inch to 1-1/16 Inch I.D Bearings
Round Stock - Trailer Axle Spindle With 4-Hole Flange - 1-3/8 Inch to 1-1/16 Inch I.D

Trailer Axle Spindle

This round bar, tapered trailer axle spindle is made from cold rolled steel, carries a 1,750 pound rating and includes a 4-hole flange for mounting a brake backing plate and a grease zerk for easy bearing lubrication maintenance. The inner bearing surface is 1.376" diameter and the outer bearing surface is 1.061" diameter. The seal surface diameter is 1.72". The axle's mounting surface is 1-3/4" diameter. Includes nut, washer and cotter pin. Using TWO of these spindles would make the capacity to 3,500 lbs of gross trailer weight.

  • 1.376" diameter inner bearing surface - 1.061" diameter outer bearing surface
  • 1¾" diameter mounting surface - 4-hole flange for mounting brake backing plate
  • Capacity 1,750 lbs - Thread 1"-14
  • Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
  • Read product description below for more information
  • Brand: Rigid Hitch
  • ASIN: B018Y5HXLG
  • Part No: SFA-1752
Trailer Axle Spindle - Rigid Hitch Pair of 4-Bolt on 4 Inch Hub Assembly (AKSQ-200044) Includes (2) Square Shaft 1 Inch Straight Spindles & Bearings
Rigid Hitch Pair of 4-Bolt on 4 Inch Hub Assembly (AKSQ-200044) Includes (2) Square Shaft 1 Inch Straight Spindles &

Trailer Axle Spindle

Easily build your own axle with this 2,000 lb rated hub assembly. This kit includes (2) - 4-Bolt on 4 inch bolt center hubs for 2,000 lb axles, (2) - 1" straight spindles, (2) castle nuts, (2) cotter pins, (8) 1/2-20 lug nuts, (2) 1.987 O.D - 1.249 I.D double lipped grease seals, (4) L-44643 1" I.D inner/outer bearings and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

  • Pair of 1" straight spindles includes castle nuts and cotter pins.
  • Bearings included - (4) L-44643 1" inside dimension.
  • Hubs have pre-installed pressed in races.
  • Hub has a 4-bolt pattern on 4" bolt circle. Pilot diameter 2-1/2", flange diameter 5.56" and measures 4-1/4" tall (through center of hub)
  • Spindles feature a SQUARE 1-1/2" stock diameter with a bearing surface of 1 Inch
  • Brand: Rigid Hitch
  • ASIN: B013VG08CO
  • Part No: AKSQ-200044
Trailer Axle Spindle - Round Stock - Trailer Axle Spindle For 1-3/8 Inch to 1-1/16 Inch I.D Bearings
Round Stock - Trailer Axle Spindle For 1-3/8 Inch to 1-1/16 Inch I.D

Trailer Axle Spindle

This round bar, tapered trailer axle spindle is made from cold rolled steel and carries a 1,750 pound rating. The inner bearing surface is 1.376" diameter and the outer bearing surface is 1.061" diameter. The seal surface diameter is 1.72". The axles's mounting surface is 1-3/4" diameter. Includes nut, washer and cotter pin. Using TWO of these spindles would make the capacity to 3,500 lbs of gross trailer weight.

  • 1.376" diameter inner bearing surface - 1.061" diameter outer bearing surface
  • 1¾" diameter mounting surface - Capacity 1,750 lbs - Thread 1"-14
  • Seal surface diameter - 1.72 inches
  • Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
  • Read product description below for more information
  • Brand: Rigid Hitch
  • ASIN: B018Y6UEAW
  • Part No: SA-1750
Trailer Axle Spindle - The ROP Shop (2) Trailer AXLE KIT Assemblies w/ 4 on 4
The ROP Shop (2) Trailer AXLE KIT Assemblies w/ 4 on 4" Bolt Idler Hub & 1" Round BT8

Trailer Axle Spindle

Note: Please review all product information to ensure that this product is compatible with your unit. A Message to the Customer: The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us...we get it. Let's work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for: Model Spec and/or Type Number Code and/or Serial Number Year Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend. - The ROP Shop Staff

    • Brand: The ROP Shop
    • ASIN: B07D3YB4LD
    • Part No: QSI-148 x 2_Z1
    Trailer Axle Spindle - Rigid Hitch Pair of 5-Bolt On 4-1/2 Inch Hub Assembly (AKRD-3500545) Includes (2) 1-3/8 Inch to 1-1/16 Inch Tapered Spindles & Bearings
    Rigid Hitch Pair of 5-Bolt On 4-1/2 Inch Hub Assembly (AKRD-3500545) Includes (2) 1-3/8 Inch to 1-1/16 Inch Tapered Spindles &

    Trailer Axle Spindle

    Easily build your own axle with this 3,500 lb rated hub assembly. This kit includes (2) - 5-Bolt on 4-1/2 inch bolt center hubs for 3,500 lb axles, (2) - 1-3/8" to 1-1/16" tapered spindles, (2) castle nuts, (2) cotter pins, (10) 1/2-20 lug nuts, (2) 2.561" O.D - 1.719" I.D double lipped grease seals, (2) L-44649 1-1/16" I.D bearings, (2) L-68149 1-3/8" bearings, (2) spindle washers, and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

    • Pair of 1-3/8" to 1-1/16" tapered spindles.
    • Bearings included - (2) L-68149 1-3/8" I.D & (2) L-44649 1-1/16" I.D
    • Hubs have pre-installed pressed in races.
    • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2.59", flange diameter 6-1/2" and measures 4-1/4" tall (measured center of hub)
    • Spindles feature a ROUND 1-3/4" stock diameter with a tapered spindle surface of 1-3/8" & 1-1/16"
    • Brand: Rigid Hitch
    • ASIN: B013IH55U6
    • Part No: AKRD-3500545

    Trailer Axle Spindle X201 Search Results

    Looking for more Trailer Axle Spindle similar ideas? Try to explore these searches: Ems Trauma Bag, Rectangle White Earrings, and Sexy Back Racer.

    Trailer Axle Spindle - Popular Video Reviews

    Cutting Out & Replacing Trailer Axle Spindles With the Hypertherm Powermax45 XP!

    Trailer Axle Spindle

    Powermax45 XP On The Hypertherm Website: https://www.hypertherm.com/en-US/hypertherm/powermax/powermax45-xp/ Bitcoin Tip Jar: 135TaSCpgh5DDAY4wTdirqPg1fbjJMXucW Bitcoin Tip Jar: 135TaSCpgh5DDAY4wTdirqPg1fbjJMXucW

    • Likes: 1373
    • View count: 51224
    • Dislikes: 42
    • Comments: 81
    Tags: fix,repair,weld,welder,welded,welding,pulse,pulsed,mig,metal,inert,gas,plasma,cut,cutter,cutting,...

    How to replace the wheel hub spindle on a trailer axle, wheel bearing assembly

    Trailer Axle Spindle

    How to replace the wheel hub spindle on a trailer axle, wheel bearing assembly. Tractor supply stocks wheel spindle bearing hub pre greased ready to direct bolt on to your 3500 lb axle. WARNING: DO NOT TRY THIS AT HOME! Please Click The Subscribe Button Below And Share Video With G+, Facebook, Tw...

    • Likes: 9
    • View count: 2575
    • Dislikes: 1
    • Comments: 3
    Tags: How to replace the wheel hub spindle on a trailer axle,wheel bearing assembly,How to,replace the ...

    Installation of the Dexter Trailer Axle with Idler Hubs - etrailer.com

    Trailer Axle Spindle

    http://www.etrailer.com/Dexter/35545I-ST-89.html Today, on this enclosed trailer, we're going to install part number 35545I-ST-89. First, we're going to do some self assembly on our axle. We're going to assemble one side. You can do this off the trailer, like we're going to do he...

    • Likes: 243
    • View count: 112976
    • Dislikes: 14
    • Comments: 10
    Tags: Zero,Trailer Axles


    365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.