Compare Prices

Truck Clutch Alignment Tool

Truck Clutch Alignment Tool - OTC (7074A) Truck Clutch Alignment Tool - 2
OTC (7074A) Truck Clutch Alignment Tool - 2"

Truck Clutch Alignment Tool

The OTC 7074A is designed for use on heavy-duty single two-plate push/pull manual and self-adjust clutches. The shafts are constructed of lightweight fiberglass-reinforced nylon that won’t hang up in clutch disc splines. Yet they’re rugged and will easily support the weight of heavy pressure plates.

  • Designed for use on heavy-duty single two-plate and push/pull or manual and self-adjust clutches
  • Shafts are constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines
  • Rugged and will easily support the weight of heavy pressure plates
  • 2 inch outside diameter
  • 1-1/4 inch pilot
  • Brand: OTC
  • ASIN: B000F5LJDW
  • UPC: 777780885379
  • Part No: 7074A
Truck Clutch Alignment Tool - OTC Tools 4528 SAE and Metric Clutch Alignment Tool Kit - 17 Piece
OTC Tools 4528 SAE and Metric Clutch Alignment Tool Kit - 17

Truck Clutch Alignment Tool

OTC 17 piece Clutch Alignment Tool Kit, SAE and Metric.

  • Includes seven fractional pilot adapters, one clutch disc centering adapter and one alignment shaft
  • Includes five metric pilot adapters, two clutch disc centering adapters and one alignment shaft
  • Blow-molded storage case
  • Brand: OTC
  • ASIN: B000IHJZEM
  • UPC: 731413039485
  • Part No: 4528
Truck Clutch Alignment Tool - OTC 7480 1-3/4
OTC 7480 1-3/4" O.D. Truck Clutch Aligning

Truck Clutch Alignment Tool

These 10-spline clutch alignment shafts are designed for use on heavy-duty single two-plate push/pull manual and self-adjust clutches. The shafts are constructed of lightweight fiberglass-reinforced nylon that won’t hang up in clutch disc splines. Yet they’re rugged and will easily support the weight of heavy pressure plates.

  • Designed for use on heavy-duty single two-plate and push/pull or manual and self-adjust clutches
  • Shafts are constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines
  • Rugged and will easily support the weight of heavy pressure plates
  • 1-3/4" outside diameter
  • 1" pilot
  • Brand: OTC
  • ASIN: B0029XLPVE
  • UPC: 731413004674
  • Part No: 7480
Truck Clutch Alignment Tool - OTC (7073A) Truck Clutch Aligning Shaft - 1-3/4
OTC (7073A) Truck Clutch Aligning Shaft - 1-3/4"

Truck Clutch Alignment Tool

The OTC 7073A is designed for use on heavy-duty single two-plate push/pull manual and self-adjust clutches. The shafts are constructed of lightweight fiberglass-reinforced nylon that won’t hang up in clutch disc splines. Yet they’re rugged and will easily support the weight of heavy pressure plates.

  • Designed for use on heavy-duty single two-plate and push/pull or manual and self-adjust clutches
  • Shafts are constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines
  • Rugged and will easily support the weight of heavy pressure plates
  • 1-3/4 inch outside diameter
  • 1-1/4 inch pilot
  • Brand: OTC
  • ASIN: B00063YIKO
  • UPC: 731413005206
  • Part No: 7073A
Truck Clutch Alignment Tool - OTC 5030 1-3/4
OTC 5030 1-3/4" OD Truck Clutch Aligning

Truck Clutch Alignment Tool

OTC 1-3/4 inch OD Truck Clutch Aligning Tool is designed for use on heavy-duty single, two-plate, push/pull, manual, and self-adjust clutches. The shafts are constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines. Yet, they're rugged and will easily support the weight of heavy pressure plates. The 5030 clutch alignment shaft is 1-3/4 inch O.D., 1-1/4 inch pilot, 10 spline, and 7.375 inch long. It is similar to Ford 308-D012 (D93T-7550-C).

  • Designed for use on heavy-duty single two-plate push/pull manual and self-adjust clutches
  • Shafts are constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines
  • Rugged and will easily support the weight of heavy pressure plates
  • Clutch alignment shaft is 1-3/4 inch O.D. 1-1/4 inch pilot 10 spline and 7.375 inch long
  • Similar to Ford 308-D012 (D93T-7550-C)
  • Brand: OTC
  • ASIN: B00063YIJA
  • UPC: 731413009662
  • Part No: 5030
Truck Clutch Alignment Tool - MACs Auto Parts 48-52899 Pickup Truck Clutch Alignment Tool - 10 Spline - 1-1/16 Diameter - 460 V8
MACs Auto Parts 48-52899 Pickup Truck Clutch Alignment Tool - 10 Spline - 1-1/16 Diameter - 460

Truck Clutch Alignment Tool

Pickup Truck Clutch Alignment Tool - 10 Spline - 1-1/16, Diameter - 352 V8

  • Pickup Truck Clutch Alignment Tool 10 Spline 11/16, Diameter 352 V8
  • Pickup Truck Clutch Alignment Tool - 10 Spline - 1-1/16 Diameter - 460 V8
  • Brand: MACs Auto Parts
  • ASIN: B0719DBXF6
  • Part No: 48-52899-1
Truck Clutch Alignment Tool - OTC 5035 Truck Clutch Adjusment Gauge Set
OTC 5035 Truck Clutch Adjusment Gauge

Truck Clutch Alignment Tool

The gauges in this set enable you to check the adjustment of pull-type heavy-duty clutches ensuring their correct operation. One gauge checks the amount of free play between the yoke and the bearing’s wear pad. The other gauge lets you determine the amount of travel between the release bearing and transmission bearing cap.

  • Truck clutch adjustment set
  • Includes clutch pedal free play gauge and release bearing travel gauge
  • Enables you to check the adjustment of pull-type heavy-duty clutches ensuring their correct operation
  • One gauge checks the amount of free play between the yoke and the bearing's wear pad
  • Other gauge lets you determine the amount of travel between the release bearing and transmission bearing cap
  • Brand: OTC
  • ASIN: B000F5LIS8
  • UPC: 731413009693
  • Part No: 5035
Truck Clutch Alignment Tool - OEMTOOLS 25161 2 Inch Spicer Clutch Adjusting Wrench
OEMTOOLS 25161 2 Inch Spicer Clutch Adjusting

Truck Clutch Alignment Tool

2" Clutch Adjusting Wrench. For internal adjustment of Spicer angle-spring heavy duty clutches found on 50% of all heavy duty trucks in the USA

  • Easy to Maneuver with (4) Swivel Casters: (2) Standard & (2) Locking
  • Drawer Loading Capacity of 75 Lbs.
  • Chamfered Drive Ends
  • Designed for professional auto mechanics and heavy duty applications
  • Brand: OEMTOOLS
  • ASIN: B004FDL3D6
  • UPC: 076812251619
  • Part No: 25161
Truck Clutch Alignment Tool - Alignment Tool ATHT175 for Chevrolet & GM Trucks Caterpillar Diesel Cummins Dies
Alignment Tool ATHT175 for Chevrolet & GM Trucks Caterpillar Diesel Cummins

Truck Clutch Alignment Tool

Alignment Tool Specification: Spline Dia 1 3/4" Spline Count 10 Pilot Dia 1.18 Chevrolet & GM Trucks Caterpillar Diesel 1975-1986 8cyl 3208cc 1960-1986 8cyl 320 8N Cummins Diesel 1960-1986 8cyl 230ci 1960-1986 8cyl 250ci 1960-1986 8cyl 270ci 1960-1986 8cyl 290ci Detroit Diesel 1975-1986 8cyl 453N 1955-1962 8cyl 471ci 1955-1962 8cyl 671ci 1955-1962 8cyl 671Eci 1961-1984 8cyl 6V53 1955-19868 cyl 6V71 1960-1986 8cyl 6V92 1960-1986 8cyl 8V71 GM Diesel 1955-1962 8cyl 426Ci 1955-1962 8cyl 503Ci 1956-1977 8cyl D478 1977-1986 8cyl D500 1965-1979 8cyl D637 1956-1977 8cyl DH478 1965-1979 8cyl DH637 1960-1986 8cyl V702 Trucks(MD Series 40 Thru 95, Kodiak 1960-1974 6.6L 6cyl 1966-1985 7.1L 6cyl 1962-1978 7.8L 6cyl 1966-1974 10.4L 8cyl Catapillar Diesel(1693, 3208, 3306)1963-1986 1 3/4" Hub Dia. Catapillar Diesel(3406)1963-19861 3/4" Hub Dia. Catapillar Diesel(1160,1673,1676)1963-19861 3/4" Hub Dia. Cummins Diesel (KT450, NH180, NH230)1963-19861 3/4" Hub Dia. Cummins Diesel (NH240, NHC250)1963-1986 1 3/4" Hub Dia. Cummins Diesel(NTC270, NTC290)1963-1986 1 3/4" Hub Dia. Cummins Diesel (NTC300, NTC335)1963-1986 1 3/4" Hub Dia. Cummins Diesel (NTC350, NTC400)1963-19861 3/4" Hub Dia. Cummins Diesel(PT270, V8265, V903)1963-19861 3/4" Hub Dia. Cummins Diesel(VT350, V903)1963-19861 3...

    • Brand: @LUTCHES
    • ASIN: B07FGRF6NH
    • UPC: 701705816179
    • Part No: ATHT175
    Truck Clutch Alignment Tool - GEARWRENCH 2420D Clutch Aligning Tool Set
    GEARWRENCH 2420D Clutch Aligning Tool

    Truck Clutch Alignment Tool

    Align single disc clutches on American and imported cars, light trucks and tractors. Adapter fits through clutch plate and into pilot bushing or bearing. Tapered cone fits into clutch hole and aligns clutch plate properly. Set includes shaft and 8 two-stepped pilot bearing adapters covering 16 sizes. The plate aligning cone has 1-1/8_ maximum diameter taper.

    • Aligns single disc clutches on American and imported cars, light trucks, and tractors
    • Plate aligning cone has 1-1/8 maximum diameter taper
    • Includes Zinc adapters for Import: 0.472" and 0.500"; 0.622" and 0.641"; 0.688" and 0.710"; 0.826" and 0.875"
    • Black adapters for domestic: 0.561" and 0.590"; 0.749" and 0.787"; 0.812" and 0.874"; 0.984 and 1.181"
    • Pilot bushing cone taper size: 0.734" to 1.17"
    • Brand: GearWrench
    • ASIN: B000RH38FU
    • UPC: 082171024207
    • Part No: 2420D

    Truck Clutch Alignment Tool O205 Search Results

    Looking for more Truck Clutch Alignment Tool similar ideas? Try to explore these searches: Spiral Switchplates, Wall Valet, and Vari Zone Scope.

    Truck Clutch Alignment Tool - Popular Video Reviews

    Ebay Universal clutch alignment tool

    Truck Clutch Alignment Tool

    How to use the universal clutch alignment tool. like and share this video! If you have any questions or concerns, feel free to leave comments on our FB page. Like us on Facebook http://bit.ly/nutzaboutbolts1 and SUBSCRIBE! http://bit.ly/NutzAboutBolts2 Check us out on http://www.nutzaboutbol...

    • Likes: 18
    • View count: 3369
    • Dislikes: 6
    • Comments: 1
    Tags: How-to,tutorials,imports,cars,automotive,help,oil,domestic,remove and install,replacement,tips,tr...

    How To Use A ToolPRO Clutch Alignment Tool

    Truck Clutch Alignment Tool

    Available in Australia: https://bit.ly/2Tx1fLy NZ: https://bit.ly/2Hx2eVb Aligning a clutch disc, pressure plate, and gearbox shaft after replacing the clutch – need not require a perfect eye and uncanny skills. The ToolPRO Universal Clutch Aligning Tool is all you need. The 6 simple parts in t...

    • Likes: 14
    • View count: 2250
    • Dislikes: 0
    • Comments: 0
    Tags: supercheap auto,diy,how to

    I made my own clutch alignment tool

    Truck Clutch Alignment Tool

    Making a clutch alignment tool seems silly. And it is. Just buy one! Unfortunately, I couldn't find one locally, and didn't want to wait for one to arrive via post. December 2017 Wide Vision

    • Likes: 266
    • View count: 5234
    • Dislikes: 0
    • Comments: 69
    Tags: wide vision,lathe,machining,key way cutting,clutch,replace,ih truck,eaton 10 speed,transmission,t...


    365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.