Compare Prices

Turbine Meter

Turbine Meter - AFWFilters HP-60626 Turbine flow meter, black
AFWFilters HP-60626 Turbine flow meter,

Turbine Meter

Flow meter assembly for Fleck 2510 & 5600 softener valves with screws, clips, and o-rings.Product FeaturesFlow MeterReplaces cracked or worn-out flow meters on all Fleck 2510 & 5600 softener valves.CompleteIncludes flow meter, screws, clips, and o-rings. (Does not include wiring cable)Product DescriptionReplace your cracked or worn out flow meter that fits all Fleck 2510 & 5600 valves. This part commonly needs replaced when the screws are over-tightened during installation, which isn't covered under the Fleck warrantyMore Info

  • Color: Black
  • Brand: AFWFilters
  • ASIN: B0145NL6N2
  • UPC: 783583351607
  • Part No: FP-60626
Turbine Meter - Fill-Rite TT10AN 1
Fill-Rite TT10AN 1" 2-35 GPM(8-132 LPM) Digital In-line Turbine Meter, Aluminum, Fuel Transfer

Turbine Meter

Electronic in-line turbine meter that may be installed at the end of a hose or plumbed in a fixed pipe installation with the 1 inch NPT Inlet/Outlet. This UL listed meter is great for gasoline, diesel, or kerosene. The meter comes from the factory with 20 Pre-Set calibration factors based on fluid Type or can be easily calibrated in the field. Operates on 2-aa batteries that can be easily changed when needed. A low battery level alert will Notify the user when it is time to change the batteries.

  • Color: Black/Red
  • Brand: Fill-Rite
  • ASIN: B01MXVM04A
  • UPC: 089404226285
  • Part No: TT10AN
Turbine Meter - 7113040 - Turbine Meter and Support
7113040 - Turbine Meter and

Turbine Meter

The 7113040 Meter Turbine and support kit contains the turbine, turbine support, (2) o-rings and (2) clips. It also contains a small tube of silicone o-ring lubricant. This kit fits on the standard sized softeners and filters, but NOT on the larger high flow models. This Kit contains (2) 7116713 Clips, (2) 7170288 Orings, (1) 7117858 Turbine, (1) 2204101 Turbine Support ALSO A DIRECT REPLACEMENT FOR GE PART WS19X10006

  • Brand: Kenmore, Whirlpool, Morton, GE, EcoWater, NorthStar
  • ASIN: B07BFKGTGN
  • UPC: 806810829127
Turbine Meter - Turbine 2 FNPT Electronic Flowmeter, PVC, 20 to 200 gpm
Turbine 2 FNPT Electronic Flowmeter, PVC, 20 to 200

Turbine Meter

TM series water meters are an accurate and economical alternative to traditional water meters. The TM200-N has a 2-inch FNPT fitting and is accurate to +/-3 percent of reading for flow rates from 20 to 200 GPM. TM water meters offer both flow rate and flow totals and are constructed from durable PVC to meet Schedule 80 PVC specifications. The TM200-N is easy to install and comes with a low-profile, LCD display powered by 2 lithium batteries. Ideal for use with irrigation systems, water processing applications, OEM water treatment equipment/skids, sub-metering of facility water usage, small waste water treatment equipment, and water based cooling systems.

  • Brand: GPI
  • ASIN: B009AJBAM4
  • Part No: TM200-N
Turbine Meter - Fuel Flowmeter, Turbine Flowmeter, Diesel, Gasoline, Kerosene Fuel Flow Meter with Digital LCD Display, 1-Inch FNPT Inlet/Outlet(Red)
Fuel Flowmeter, Turbine Flowmeter, Diesel, Gasoline, Kerosene Fuel Flow Meter with Digital LCD Display, 1-Inch FNPT

Turbine Meter

Malfunction and solution: The flow meter is not accurate. 1. The method of field calibration is not correct.  Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely. 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly. 6. Too close to the motor or electronic noise environment. install properly. Flow rate is normal but the meter can not count. Press the button of DISPLAY, the meter starts. 1. Field calibration is not correct. Calibrate again. 2. The impeller is blocked or damaged. Remove the meter and make sure the impeller turns freely. 3. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. Specifications:  Operating voltage: 2.3-3.3V Battery type: 2 x AAA LRO3 batteries Thread size: 1inch NPT Repetition: ±0.5% Measure accuracy: ±1% Maximum working pressure: 20BAR Flow range: 15-120L / Min Single count: 0.00-9999.9 Total cumulative count: 0-99999 Mistakes count: 0.1000-9.9999 Working temperature: -10°C ~ +60°C(14°F~140°F) Standby time: 1 year Appl...

  • Color: Red
  • Brand: Walfront
  • ASIN: B078MTT4VW
  • UPC: 663862600803
  • Part No: Walfront3sc9vbrd16-01
Turbine Meter - GPI 113255-4, 01N31GM Nylon Turbine Water Flowmeter with Digital LCD Display, 3-30 GPM, 1-Inch FNPT Inlet/Outlet
GPI 113255-4, 01N31GM Nylon Turbine Water Flowmeter with Digital LCD Display, 3-30 GPM, 1-Inch FNPT

Turbine Meter

The GPI 01N31GM digital turbine water flowmeter is made from durable nylon and features an LCD display that is accurate to +/-5 percent of reading. This economical turbine meter is designed for flow rates from 3 to 30 GPM and is factory calibrated in gallons for use with water. The lightweight 01N31GM mounts easily to the end of a hose and is ideal for use with free flow gravity systems or combined with an electric transfer pump as part of an irrigation or water management system. The GPI 01N31GM digital flow meter has 1-inch FNPT inlet/outlet and comes with two standard AAA batteries.

  • Brand: GPI
  • ASIN: B009AJAUYS
  • UPC: 031401325546
  • Part No: 01N31GM
Turbine Meter - 1″ Digital Turbine Flow Meter,Gas Oil Fuel Flowmeter,Pump Flow Meter ,Diesel Fuel Flow Meter,High Accuracy,for Measure Diesel, Kerosene, Gasoline, etc.(Red)
1″ Digital Turbine Flow Meter,Gas Oil Fuel Flowmeter,Pump Flow Meter ,Diesel Fuel Flow Meter,High Accuracy,for Measure Diesel, Kerosene, Gasoline,

Turbine Meter

Specification: Operating voltage: 2.3-3.3V Battery type: 2 x AAA LRO3 batteries Thread size: 1inch NPT Measure accuracy: ±1% Maximum working pressure: 20BAR Flow range: 15-120L / Min Single count: 0.00-9999.9 Total cumulative count: 0-99999 Working temperature: -10°C ~ +60°C(14°F~140°F) Standby time: 1 year Weight: 371g Problem solving service *When it appears - normal flow rate but the meter does not count, when the DISPLAY button is pressed, the meter is turned on. In this case, the possible cause is: 1. the impeller is stuck or damaged; 2. the sealant material is wrapped around the impeller; Solution: Remove the meter and ensure that the impeller rotates freely. *When it occurs - the flow rate is reduced and the meter does not count when the DISPLAY button is pressed, the meter is turned on. In this case, the reasons may be caused by: 1. The meter is partially blocked by the dried liquid; 2. Below the minimum flow rate; Corresponding solution: remove the instrument to ensure that the impeller rotates freely; 2. Increase the flow rate * When the meter is not working properly, it may be due to a board failure or a button failure. The corresponding solution: replace the circuit board

  • Brand: Acogedor
  • ASIN: B07MD927SJ
  • UPC: 736077789585
  • Part No: Acogedoryvcqz4wr9t-01
Turbine Meter - Turbine Flow Meter, Flow Water Meter 15-120L/min 1
Turbine Flow Meter, Flow Water Meter 15-120L/min 1" NPT Digital Fuel Meter Water Flow Meter Diesel Oil Fuel Flow Meter, Fuel Flow

Turbine Meter

Specification: Thread size: 1inch NPT female Material: Plastic Color: Blue Repetition: ±0.5% Measure accuracy: ±1% Maximum working pressure: 20BAR Flow range: 15-120L / Min Single count: 0.00-9999.9 Total cumulative count: 0-99999 Error coefficient: 0.1000-9.9999 Unit: L / GAL / PTS / QTS Working temperature: -10°C ~ +60°C(14°F~140°F) Operating voltage: 2.3-3.3V Application: Diesel, urea, kerosene, gasoline Battery type: 2 x AAA LRO3 batteries Weight: 270g / 9.5oz (approx.) Malfunction and solution: The flow meter is not accurate. 1. The method of field calibration is not correct.   Calibrate again. 2. The flow rate on the meter is below the lowest.  Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely. 4. The impeller is wrapped by the sealing material.  Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller.   Install properly. 6. Too close to the motor or electronic noise environment   Install properly. The reading numbers faded or blanked out. 1.Battery is exhausted or not connected Check the batteries or even replace them. Flow rate is normal but the meter can not count. Press the button of DISPLAY, the meter starts. 1. Field ...

  • Brand: Wal front
  • ASIN: B07L99Q9V4
  • UPC: 736077295048
  • Part No: Wal front8nisgmobr2
Turbine Meter - 1″ Digital Turbine Flow Meter,Gas Oil Fuel Flowmeter,Pump Flow Meter ,Diesel Fuel Flow Meter,High Accuracy,for Measure Diesel, Kerosene, Gasoline, etc.(Blue)
1″ Digital Turbine Flow Meter,Gas Oil Fuel Flowmeter,Pump Flow Meter ,Diesel Fuel Flow Meter,High Accuracy,for Measure Diesel, Kerosene, Gasoline,

Turbine Meter

Specification: Operating voltage: 2.3-3.3V Battery type: 2 x AAA LRO3 batteries Thread size: 1inch NPT Measure accuracy: ±1% Maximum working pressure: 20BAR Flow range: 15-120L / Min Single count: 0.00-9999.9 Total cumulative count: 0-99999 Working temperature: -10°C ~ +60°C(14°F~140°F) Standby time: 1 year Weight: 371g Problem solving service *When it appears - normal flow rate but the meter does not count, when the DISPLAY button is pressed, the meter is turned on. In this case, the possible cause is: 1. the impeller is stuck or damaged; 2. the sealant material is wrapped around the impeller; Solution: Remove the meter and ensure that the impeller rotates freely. *When it occurs - the flow rate is reduced and the meter does not count when the DISPLAY button is pressed, the meter is turned on. In this case, the reasons may be caused by: 1. The meter is partially blocked by the dried liquid; 2. Below the minimum flow rate; Corresponding solution: remove the instrument to ensure that the impeller rotates freely; 2. Increase the flow rate * When the meter is not working properly, it may be due to a board failure or a button failure. The corresponding solution: replace the circuit board

  • Brand: Acogedor
  • ASIN: B07M9P3TF9
  • UPC: 736077789592
  • Part No: Acogedoryvcqz4wr9t-02
Turbine Meter - 1″ Digital Turbine Flow Meter,K24 Gas Oil Fuel Flowmeter,Pump Flow Meter Diesel Fuel Diesel Kerosene Line Pipe Counter for Chemicals Water etc
1″ Digital Turbine Flow Meter,K24 Gas Oil Fuel Flowmeter,Pump Flow Meter Diesel Fuel Diesel Kerosene Line Pipe Counter for Chemicals Water

Turbine Meter

Features: This chemical flow meter control panel adopts modular design. It is fully functional, convenient to operate and has simple structure. Large LCD display is convenient for clear reading. It can be used to meter methanol, kerosene, diesel, fuel, urea water. Widely used in petroleum, chemical industry, medicine, transportation, food industry and business field. Specifications: Model: K24 Fluid: Methanol, diesel, fuel, kerosene, urea water Inlet/Outlet Thread: G1 (BSPP) Measurement Accuracy: ±1% Repeatability: ±0.5% Max. Pressure: 20BAR Working Voltage: 2.3-3.3V Standby Time: 2 years Flow Range: 10-120L/MIN Single Count: 0.00-999.9 Total Count: 0.00-999999.9 Package Includes: 1 x Turbine Flow Meter

  • Brand: Acogedor
  • ASIN: B07MGVP3RT
  • UPC: 736077790017
  • Part No: Acogedorf0es63abzv

Turbine Meter O429 Search Results

Looking for more Turbine Meter similar ideas? Try to explore these searches: Autumn Harvest Pins, Atlas 10' Lathe, and Corner Bar.

Turbine Meter - Popular Video Reviews

turbine meter

Turbine Meter

Industrial working model principal of turbine meter, 3D Animation video

  • Likes: 60
  • View count: 10160
  • Dislikes: 2
  • Comments: 1
Tags: 3D Animation,3D Industrial Animation,Industrial 3D Design,3D Industrial Design,3 dimensional anim...

Measuring or Working Principle of Turbine Flow Meter

Turbine Meter

Please subscribe to this channel: https://www.youtube.com/channel/UCEBRbgxNNiC-Ghj9JH3rCLg Measuring or Working Principle of Turbine Flow Meter In my previous video i told about the Vortex flow meter, and in Today's video i want to tell about the measuring or working principle of Turbine flow m...

  • Likes: 138
  • View count: 50877
  • Dislikes: 49
  • Comments: 11
Tags: Measure,measuring,working,principle,turbine,flow,meter,flowmeter,turbine flowmeter,Measuring or W...

MV Series Turbine Meter

Turbine Meter

New album

  • Likes: 5
  • View count: 2064
  • Dislikes: 0
  • Comments: 0
Tags: Meter (Unit Of Length),Turbine (Invention)


365dealnet.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.